ELM 1-805 LED Standoff Equivalent & Substitute Parts

Part Overview

The ELM 1-805 is a T1 3/4 LED standoff manufactured by Bivar Inc., designed for vertical mounting applications. This component features a black PVC construction with a length of 0.805" (20.45mm) and is classified as an active product with ROHS3 compliance. The part is supplied in bag packaging with 903 units currently in stock as new original inventory.

Substitute parts are identified when they maintain compatibility across critical electrical and mechanical parameters while offering alternative specifications for specific application requirements.

Substiute Parts

ELM 1-805

Bivar Inc.In Stock: 951ELM 1-805 Datasheet

Current PartRFQ

ELM 1-820

Bivar Inc.In Stock: 2082ELM 1-820 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the ELM 1-805 is determined by the following critical parameters:

Mandatory Matching Parameters:

• Manufacturer: Bivar Inc.
• Series: ELM 1
• LED Type: T1 3/4
• Material: Black PVC
• Product Status: Active
• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level: 1 (Unlimited)

Variable Parameter:

• Length: Tolerance range permits dimensional variation within application-specific requirements

The ELM 1-820 qualifies as a parametric equivalent substitute because it maintains all mandatory matching parameters while offering a length specification of 0.820" (20.83mm), representing a 0.015" (0.38mm) dimensional difference from the primary part.

Parameter Comparison

Engineering Selection Recommendations

Both the ELM 1-805 and ELM 1-820 are active products with identical compliance certifications, including ROHS3 compliance and MSL 1 rating. Selection between these parts is determined by the specific length requirement of the application. The ELM 1-805 provides the shorter standoff height at 0.805" (20.45mm), while the ELM 1-820 offers an extended length of 0.820" (20.83mm). Both parts are supplied as new original inventory in bag packaging and share identical electrical and material specifications within the ELM 1 series.

Frequently Asked Questions (FAQ)

Q: What determines if ELM 1-820 can substitute for ELM 1-805?

A: Substitution is valid when the application tolerates the 0.015" (0.38mm) length difference. Both parts maintain identical LED type (T1 3/4), material (Black PVC), manufacturer (Bivar Inc.), series designation (ELM 1), and compliance ratings (ROHS3, MSL 1).

Q: Are there electrical differences between ELM 1-805 and ELM 1-820?

A: No. Both parts are mechanically-focused standoff components with identical electrical specifications. The only difference is the physical length dimension.

Q: Can I use ELM 1-820 in place of ELM 1-805 in my design?

A: Substitution is valid only if your mechanical design accommodates the 0.820" (20.83mm) length. Verify that the additional 0.015" (0.38mm) height does not conflict with enclosure constraints or assembly geometry.

Q: What is the packaging format for both parts?

A: Both ELM 1-805 and ELM 1-820 are supplied in bag packaging. Current inventory shows 903 units for ELM 1-805 and 1983 units for ELM 1-820 as new original stock.

Q: Are both parts RoHS compliant?

A: Yes. Both ELM 1-805 and ELM 1-820 are ROHS3 compliant with MSL 1 (Unlimited) moisture sensitivity rating.