ELM 1-530 Equivalent & Substitute Parts

Part Overview

The ELM 1-530 is a T1 3/4 LED standoff manufactured by Bivar Inc., constructed from black PVC with a length of 0.530" (13.46mm). This component is classified as an active product with ROHS3 compliance and unlimited moisture sensitivity rating. Alternative models become necessary when exact dimensional specifications cannot be met due to inventory constraints, application-specific spatial requirements, or supply chain considerations.

Substiute Parts

ELM 1-530

Bivar Inc.In Stock: 684ELM 1-530 Datasheet

Current PartRFQ

ELM 1-13MM

Bivar Inc.In Stock: 20832ELM 1-13MM Datasheet

Parametric EquivalentRFQ

ELM 1-545

Bivar Inc.In Stock: 20142ELM 1-545 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the ELM 1-530 is limited to alternative models within the ELM 1 series that maintain critical mechanical and electrical specifications. The primary substitution criteria are as follows:

Key Substitution Parameters:

• Manufacturer: Bivar Inc. (unchanged)
• LED Type: T1 3/4 (unchanged)
• Material: Black PVC (unchanged)
• Series: ELM 1 (unchanged)
• RoHS Compliance: ROHS3 Compliant (unchanged)
• Moisture Sensitivity Level: 1 (Unlimited) (unchanged)

The allowable variation parameter is length, which may differ by dimensional tolerance in specific applications. The substitute parts ELM 1-13MM and ELM 1-545 satisfy these criteria while offering alternative length specifications of 0.510" (12.95mm) and 0.545" (13.84mm) respectively.

Parameter Comparison

Engineering Selection Recommendations

All three parts—ELM 1-530, ELM 1-13MM, and ELM 1-545—maintain active product status with identical ROHS3 compliance and unlimited moisture sensitivity ratings. Selection among these parts should be determined solely by dimensional requirements specific to the application. The ELM 1-13MM offers the shortest length at 0.510" (12.95mm), the ELM 1-530 provides a mid-range length at 0.530" (13.46mm), and the ELM 1-545 supplies the longest specification at 0.545" (13.84mm). All parts are manufactured by Bivar Inc. within the same ELM 1 series and employ identical mechanical and electrical characteristics.

Frequently Asked Questions (FAQ)

Q: Can ELM 1-13MM be used in place of ELM 1-530? A: Yes. The ELM 1-13MM is dimensionally shorter at 0.510" (12.95mm) compared to 0.530" (13.46mm). Substitution is appropriate if the application permits the reduced length and does not require the specific 0.530" dimension.

Q: What is the primary difference between ELM 1-530 and ELM 1-545? A: The ELM 1-545 has a length of 0.545" (13.84mm), which is 0.015" (0.38mm) longer than the ELM 1-530. All other specifications remain identical.

Q: Are all three parts RoHS compliant? A: Yes. All parts—ELM 1-530, ELM 1-13MM, and ELM 1-545—meet ROHS3 compliance requirements.

Q: Do these parts share the same LED specification? A: Yes. All parts utilize the T1 3/4 LED type and are constructed from black PVC material.

Q: What factors should guide substitution selection? A: Substitution selection is determined by the spatial requirements of your assembly. If the application permits dimensional variation within the range of 0.510" to 0.545", any of the three parts is suitable. If the application requires the exact 0.530" dimension, the ELM 1-530 must be specified.