ELM 1-375 LED Standoff Equivalent & Substitute Parts

Part Overview

The ELM 1-375 is a T1 3/4 LED standoff manufactured by Bivar Inc., designed for vertical self-retaining mounting applications. This component features a black PVC construction with a 0.375" (9.53mm) length and is classified as an active product with ROHS3 compliance. Substitute parts are identified when equivalent electrical and mechanical parameters align with the main part specifications, enabling direct replacement in applications where dimensional and material tolerances permit.

Substiute Parts

ELM 1-375

Bivar Inc.In Stock: 839ELM 1-375 Datasheet

Current PartRFQ

ELM 1-10MM

Bivar Inc.In Stock: 1046ELM 1-10MM Datasheet

Parametric EquivalentRFQ

ELM 1-385

Bivar Inc.In Stock: 859ELM 1-385 Datasheet

Parametric EquivalentRFQ

ELM 3-370

Bivar Inc.In Stock: 939ELM 3-370 Datasheet

Parametric EquivalentRFQ

ELM 3-375

Bivar Inc.In Stock: 8887ELM 3-375 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the ELM 1-375 are qualified based on the following criteria:

Primary Substitution Parameters:

• LED Type: T1 3/4 (all substitutes maintain this specification)
• Material: Black PVC (all substitutes maintain this specification)
• Mounting Style: Self Retaining Vertical (all substitutes maintain this specification)
• Color: Black (all substitutes maintain this specification)
• RoHS Status: ROHS3 Compliant (all substitutes maintain this specification)
• Moisture Sensitivity Level: 1 (Unlimited) (all substitutes maintain this specification)
• Product Status: Active (all substitutes maintain this specification)

Secondary Substitution Parameter:

• Length: Tolerance range 0.370" to 0.390" (9.40mm to 9.91mm)

The ELM 1-375 qualifies four substitute parts within the Bivar Inc. product family. Substitutes within the ELM 1 series (ELM 1-10MM, ELM 1-385) maintain identical HTSUS classification (8547.20.0000). Substitutes within the ELM 3 series (ELM 3-370, ELM 3-375) operate under a different HTSUS classification (3926.90.9985) but maintain all core electrical and material specifications.

Parameter Comparison

Engineering Selection Recommendations

All identified substitute parts maintain active product status and ROHS3 compliance, qualifying them for direct substitution in applications where the specified parameters are acceptable.

ELM 1 Series Substitutes (ELM 1-10MM, ELM 1-385): These parts share identical HTSUS classification with the main part (8547.20.0000) and maintain the same base product family designation. Length variations range from 0.385" to 0.390", representing a maximum deviation of ±0.015" from the nominal 0.375" specification.

ELM 3 Series Substitutes (ELM 3-370, ELM 3-375): These parts operate under HTSUS classification 3926.90.9985 and represent an alternative product series within the Bivar Inc. portfolio. ELM 3-375 provides an exact length match to the main part (0.375"), while ELM 3-370 operates at 0.370" length. Both maintain all core material, electrical, and compliance specifications.

Inventory Availability: ELM 3-375 maintains the highest inventory level at 8835 pieces, followed by ELM 1-10MM at 947 pieces. The main part ELM 1-375 maintains 763 pieces in stock.

Frequently Asked Questions (FAQ)

Q: What determines whether a part can substitute for the ELM 1-375?

A: Substitution is determined by matching the following parameters: T1 3/4 LED type, black PVC material, self-retaining vertical mounting style, black color, ROHS3 compliance, MSL 1 rating, and active product status. Length must fall within the 0.370" to 0.390" tolerance range.

Q: Can ELM 3 series parts replace ELM 1 series parts?

A: Yes. ELM 3-370 and ELM 3-375 maintain all core electrical and material specifications identical to ELM 1 series parts. The primary difference is HTSUS classification (3926.90.9985 versus 8547.20.0000), which reflects tariff and regulatory categorization rather than functional capability.

Q: What is the length tolerance range for substitution?

A: Substitute parts operate within a length range of 0.370" (9.40mm) to 0.390" (9.91mm). The main part ELM 1-375 is specified at 0.375" (9.53mm), representing the nominal center point of this range.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. All identified substitute parts maintain ROHS3 compliance and MSL 1 (Unlimited) moisture sensitivity rating, matching the main part specifications.

Q: What is the difference between ELM 1-375 and ELM 3-375?

A: Both parts share identical length (0.375"), LED type (T1 3/4), material (black PVC), and compliance specifications. The primary difference is HTSUS classification and base product number designation (ELM1-3 versus ELM3-3). ELM 3-375 maintains significantly higher inventory availability (8835 pieces versus 763 pieces).

Q: Can I use ELM 1-10MM as a direct replacement for ELM 1-375?

A: ELM 1-10MM operates at 0.390" length compared to the 0.375" specification of ELM 1-375, representing a +0.015" deviation. All other parameters remain identical. Substitution is valid where this length variation is within application tolerance.

Q: What packaging format is used for all substitute parts?

A: All parts, including the main part and all substitutes, are supplied in bag packaging.