ELM 1-370 LED Standoff Equivalent & Substitute Parts

Part Overview

The ELM 1-370 is a T1 3/4 LED standoff manufactured by Bivar Inc., featuring a black PVC construction with a 0.370" (9.40mm) length. This component is classified as an active product and is ROHS3 compliant. LED standoffs serve as mechanical mounting and alignment components for T1 3/4 LED packages in electronic assemblies. Substitute parts are identified when equivalent electrical and mechanical parameters are maintained across the product line, enabling design flexibility and supply chain continuity.

Substiute Parts

ELM 1-370

Bivar Inc.In Stock: 971ELM 1-370 Datasheet

Current PartRFQ

ELM 1-385

Bivar Inc.In Stock: 859ELM 1-385 Datasheet

Parametric EquivalentRFQ

ELM 3-370

Bivar Inc.In Stock: 939ELM 3-370 Datasheet

Parametric EquivalentRFQ

ELM 3-375

Bivar Inc.In Stock: 8887ELM 3-375 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the ELM 1-370 are determined by compatibility across the following critical parameters:

LED Package Type: All substitutes maintain T1 3/4 LED compatibility, ensuring mechanical fit within existing PCB footprints and assembly fixtures.

Material Composition: All substitutes use black PVC, maintaining thermal and electrical isolation properties equivalent to the main part.

Manufacturer: All substitutes are manufactured by Bivar Inc., ensuring consistent quality and design standards.

Compliance & Certification: All substitutes maintain ROHS3 compliance and MSL 1 rating, meeting regulatory and environmental requirements.

Length Tolerance: Substitutes vary in length (0.370", 0.375", 0.385") to accommodate different PCB standoff height requirements while maintaining the same LED package interface.

Series Designation: Substitutes span ELM 1 and ELM 3 series, representing different base product configurations with equivalent functional performance.

Parameter Comparison

Engineering Selection Recommendations

ELM 1-385: This substitute maintains ELM 1 series designation with identical LED package compatibility and material specification. The increased length of 0.385" (9.78mm) versus 0.370" (9.40mm) accommodates applications requiring greater standoff height. Both parts are active products with equivalent ROHS3 compliance and MSL 1 rating.

ELM 3-370: This substitute provides identical length specification (0.370") and LED package type while transitioning to ELM 3 series configuration. Material, color, and compliance certifications remain equivalent. This part is suitable for designs utilizing ELM 3 series architecture.

ELM 3-375: This substitute combines ELM 3 series designation with 0.375" (9.53mm) length, positioning it between the 0.370" and 0.385" length options. All electrical and mechanical parameters remain compliant with ROHS3 and MSL 1 specifications. Highest inventory availability (8835 Pcs) supports supply chain requirements.

All substitute parts maintain active product status and are manufactured by Bivar Inc., ensuring design continuity and regulatory compliance.

Frequently Asked Questions (FAQ)

Q: What determines if an ELM 1-370 substitute is compatible with my design?

A: Compatibility is determined by LED package type (T1 3/4), material (black PVC), and required standoff length. All listed substitutes maintain T1 3/4 compatibility. Length selection depends on your PCB standoff height requirement. ELM 1 and ELM 3 series are interchangeable based on your base product architecture.

Q: Can I use ELM 3-375 in place of ELM 1-370?

A: Yes, if your design accommodates the 0.375" (9.53mm) length instead of 0.370" (9.40mm). Both parts share identical LED package type, material, color, and compliance specifications. Series designation (ELM 1 vs. ELM 3) reflects base product configuration rather than functional incompatibility.

Q: Are all substitutes ROHS3 compliant?

A: Yes. All listed substitute parts maintain ROHS3 compliance and MSL 1 (Unlimited) rating, meeting regulatory and environmental requirements equivalent to the ELM 1-370.

Q: What is the difference between ELM 1 and ELM 3 series standoffs?

A: ELM 1 and ELM 3 series represent different base product configurations within the Bivar Inc. LED standoff line. Both series maintain identical LED package compatibility (T1 3/4), material (black PVC), and compliance specifications. Series selection depends on your assembly architecture and base product designation.

Q: How do length variations affect my design?

A: Length variations (0.370", 0.375", 0.385") determine the vertical distance between your PCB and LED package. Select the length matching your required standoff height. All lengths maintain identical LED package interface compatibility.

Q: Is packaging identical across all substitutes?

A: Yes. All parts are supplied in bag packaging, maintaining consistent handling and storage requirements.