ELM 1-365 LED Standoff Equivalent & Substitute Parts

Part Overview

The ELM 1-365 is a T1 3/4 LED standoff manufactured by Bivar Inc., featuring a black PVC construction with a 0.365" (9.27mm) length. This component is classified as an active product and serves as a mechanical mounting solution for LED applications requiring vertical orientation. Substitute parts become necessary when specific length requirements vary due to PCB design constraints, assembly tolerances, or application-specific spacing requirements while maintaining compatibility with T1 3/4 LED form factors and PVC material specifications.

Substiute Parts

ELM 1-365

Bivar Inc.In Stock: 1164ELM 1-365 Datasheet

Current PartRFQ

ELM 1-350

Bivar Inc.In Stock: 12886ELM 1-350 Datasheet

Parametric EquivalentRFQ

ELM 3-370

Bivar Inc.In Stock: 939ELM 3-370 Datasheet

Parametric EquivalentRFQ

ELM 3-375

Bivar Inc.In Stock: 8887ELM 3-375 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the ELM 1-365 is determined by the following critical parameters that must remain constant across all equivalent parts:

Fixed Parameters (Non-Negotiable):

• LED Type: T1 3/4
• Material: PVC
• Color: Black
• Orientation: Vertical mounting
• RoHS Compliance: ROHS3 Compliant
• Moisture Sensitivity Level: 1 (Unlimited)

Variable Parameter (Allows Substitution):

• Length: Tolerance range 0.350" to 0.375" (8.89mm to 9.53mm)

The ELM 1-365 can be substituted with ELM 1-350, ELM 3-370, and ELM 3-375. These parts maintain identical LED specifications, material composition, and environmental compliance ratings while offering alternative length dimensions to accommodate different PCB mounting heights and assembly requirements.

Parameter Comparison

Engineering Selection Recommendations

All substitute parts listed—ELM 1-350, ELM 3-370, and ELM 3-375—maintain active product status and full ROHS3 compliance, ensuring regulatory and environmental standards are met across all options. Selection between these alternatives should be based solely on the required standoff length for your specific PCB assembly height and LED mounting clearance specifications.

The ELM 1-350 provides the shortest option at 0.350" (8.89mm), suitable for compact assemblies with minimal vertical clearance. The ELM 1-365 (original specification) offers a mid-range height of 0.365" (9.27mm). The ELM 3-370 and ELM 3-375 provide extended heights of 0.370" (9.40mm) and 0.375" (9.53mm) respectively, accommodating applications requiring greater standoff distance.

All parts share identical material composition (PVC), color (Black), LED form factor (T1 3/4), and environmental ratings (MSL 1), confirming functional interchangeability within the specified length parameters.

Frequently Asked Questions (FAQ)

Q: Can ELM 1-350 be used in place of ELM 1-365?

A: Yes. The ELM 1-350 is a direct substitute provided your application tolerates a 0.015" (0.38mm) reduction in standoff height. Both parts share identical LED specifications, material, color, and compliance ratings.

Q: What is the primary difference between ELM 1 and ELM 3 series parts?

A: The ELM 1 and ELM 3 series differ in base product number and HTSUS classification, but maintain identical functional specifications for LED type, material, color, and environmental compliance. Selection between series is determined by length requirements and application-specific mounting needs.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. ELM 1-350, ELM 3-370, and ELM 3-375 are all ROHS3 compliant with Moisture Sensitivity Level 1 (Unlimited), matching the compliance profile of the ELM 1-365.

Q: Which substitute part most closely matches the ELM 1-365 length?

A: The ELM 3-370 at 0.370" (9.40mm) provides the closest length match to the ELM 1-365 at 0.365" (9.27mm), with a difference of only 0.005" (0.13mm).

Q: Can these parts be used interchangeably in the same assembly?

A: Interchangeability depends on your PCB design tolerances and LED clearance requirements. All parts are functionally equivalent for T1 3/4 LED mounting, but length variations must be accommodated by your mechanical design.

Q: What packaging format is used for these parts?

A: All parts are supplied in Bag packaging format suitable for standard component handling and storage.