ELM 1-335 LED Standoff Equivalent & Substitute Parts

Part Overview

The ELM 1-335 is a T1 3/4 LED standoff manufactured by Bivar Inc., designed for vertical mounting applications. This component features a black PVC construction with a 0.335" (8.51mm) length specification. The part maintains Active product status and is ROHS3 compliant, making it suitable for current production environments. Substitute parts are identified when equivalent electrical and mechanical parameters align with application requirements, allowing for component interchangeability based on specific design constraints.

Substiute Parts

ELM 1-335

Bivar Inc.In Stock: 1188ELM 1-335 Datasheet

Current PartRFQ

ELM 1-350

Bivar Inc.In Stock: 12886ELM 1-350 Datasheet

Parametric EquivalentRFQ

ELM 3-335

Bivar Inc.In Stock: 14732ELM 3-335 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the ELM 1-335 are identified based on the following critical parameters:

Primary Substitution Criteria:

• LED Type: T1 3/4 (maintained across all substitutes)
• Material: PVC (maintained across all substitutes)
• Color: Black (maintained across all substitutes)
• RoHS Compliance: ROHS3 Compliant (maintained across all substitutes)
• Moisture Sensitivity Level: 1 (Unlimited) (maintained across all substitutes)
• Manufacturer: Bivar Inc. (maintained across all substitutes)

Variable Parameters Allowing Substitution:

• Length: 0.335" (8.51mm) or 0.350" (8.89mm)
• Series: ELM 1 or ELM 3

The ELM 1-335 has two identified parametric equivalents: ELM 1-350 and ELM 3-335. These parts share identical electrical and mechanical characteristics with the main part except for length specification (ELM 1-350) or series designation (ELM 3-335), which are allowable variations within the product category.

Parameter Comparison

Engineering Selection Recommendations

ELM 1-350 Selection Criteria: The ELM 1-350 is a parametric equivalent differing only in length specification (0.350" versus 0.335"). This substitute is applicable when design requirements permit a 0.015" (0.38mm) length increase. Both parts maintain identical compliance certifications, material composition, and electrical characteristics. The ELM 1-350 maintains the same ELM 1 series designation as the primary part.

ELM 3-335 Selection Criteria: The ELM 3-335 is a parametric equivalent maintaining the identical 0.335" length specification but differs in series designation (ELM 3 versus ELM 1). This substitute is applicable when design requirements accommodate series variation while maintaining identical length, material, and compliance specifications. The ELM 3-335 preserves all electrical and mechanical parameters of the primary part.

Compliance Verification: All three parts maintain ROHS3 compliance and Moisture Sensitivity Level 1 (Unlimited), confirming suitability for equivalent application contexts. Active product status across all parts ensures continued availability and manufacturing support.

Frequently Asked Questions (FAQ)

Q: What determines if ELM 1-350 can replace ELM 1-335? A: The ELM 1-350 differs only in length (0.350" versus 0.335"). Substitution is valid when the 0.015" length difference does not conflict with mechanical clearance or mounting specifications in the target application.

Q: What determines if ELM 3-335 can replace ELM 1-335? A: The ELM 3-335 maintains identical length and all electrical/mechanical parameters but belongs to the ELM 3 series rather than ELM 1. Substitution is valid when series designation does not impose application-specific constraints.

Q: Are all three parts ROHS3 compliant? A: Yes. ELM 1-335, ELM 1-350, and ELM 3-335 are all ROHS3 compliant with Moisture Sensitivity Level 1 (Unlimited).

Q: Do these parts share identical material and color specifications? A: Yes. All three parts are constructed from black PVC material with identical color and material properties.

Q: What is the LED type specification across all substitute parts? A: All parts utilize T1 3/4 LED type specification, maintaining consistent electrical and mechanical interface characteristics.

Q: Are packaging specifications identical across all parts? A: Yes. ELM 1-335, ELM 1-350, and ELM 3-335 are all supplied in Bag packaging format.

Q: What inventory levels are available for each part? A: ELM 1-335 has 1109 pcs in stock; ELM 1-350 has 12862 pcs in stock; ELM 3-335 has 14653 pcs in stock.