ELM 1-295 LED Standoff Equivalent & Substitute Parts

Part Overview

The ELM 1-295 is a T1 3/4 LED standoff manufactured by Bivar Inc., featuring a black PVC construction with a 0.295" (7.49mm) length. This component is classified as an active product and is RoHS3 compliant. LED standoffs serve as mechanical mounting and alignment components for T1 3/4 LED packages in electronic assemblies. Substitute parts become necessary when the primary part number reaches end-of-life status, inventory constraints occur, or design revisions require alternative mechanical specifications within the same functional category.

Substiute Parts

ELM 1-295

Bivar Inc.In Stock: 868ELM 1-295 Datasheet

Current PartRFQ

ELM 1-300

Bivar Inc.In Stock: 8814ELM 1-300 Datasheet

Parametric EquivalentRFQ

ELM 3-285

Bivar Inc.In Stock: 4795ELM 3-285 Datasheet

Parametric EquivalentRFQ

ELM 3-300

Bivar Inc.In Stock: 9647ELM 3-300 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the ELM 1-295 is determined by the following critical parameters:

Primary Substitution Criteria:

• LED Type: T1 3/4 (must match exactly)
• Material: Black PVC (must match exactly)
• Color: Black (must match exactly)
• Manufacturer: Bivar Inc. (same manufacturer ecosystem)
• RoHS Status: ROHS3 Compliant (regulatory requirement)
• Moisture Sensitivity Level: 1 (Unlimited) (environmental tolerance)

Secondary Consideration:

• Length tolerance: Mechanical height variations within 0.285" to 0.300" (7.24mm to 7.62mm) are acceptable for standoff applications where precise vertical spacing accommodates minor dimensional differences.

The substitute parts ELM 1-300, ELM 3-285, and ELM 3-300 all satisfy these criteria. The ELM 1-300 maintains the same series designation (ELM 1) with a 0.005" (0.13mm) length increase. The ELM 3 series parts represent alternative series within the same product family with compatible dimensional and material specifications.

Parameter Comparison

Engineering Selection Recommendations

All substitute parts listed maintain active product status and full RoHS3 compliance, ensuring regulatory alignment with current environmental standards. The ELM 1-300 represents the closest substitute within the same ELM 1 series, differing only by 0.005" in length. This minimal dimensional variance is typical for standoff applications where mechanical tolerance stacks accommodate such variations.

The ELM 3-285 and ELM 3-300 parts represent alternative series options. The ELM 3-285 provides the shortest available length at 0.285" (7.24mm), while ELM 3-300 matches the 0.300" dimension of ELM 1-300. Selection between ELM 1 and ELM 3 series should be based on specific PCB layout requirements and mechanical clearance constraints in the target application.

All parts maintain MSL 1 (Unlimited) rating, indicating no moisture sensitivity restrictions during storage or handling. Inventory availability is confirmed for all substitute options, with ELM 3-300 offering the highest stock level at 9,596 pieces.

Frequently Asked Questions (FAQ)

Q: Can ELM 1-300 be used as a direct replacement for ELM 1-295?

A: Yes. The ELM 1-300 differs only by 0.005" (0.13mm) in length while maintaining identical LED type (T1 3/4), material (Black PVC), color, RoHS compliance, and MSL rating. This dimensional difference is within acceptable tolerance for standoff applications.

Q: What is the difference between ELM 1 and ELM 3 series standoffs?

A: Both series use identical T1 3/4 LED type, black PVC material, and meet the same compliance standards. The primary distinction is the series designation and base product number. ELM 3 series parts are functionally equivalent for mechanical standoff applications.

Q: Are there any length restrictions when selecting a substitute?

A: The available substitutes range from 0.285" to 0.300" in length. Selection should account for PCB-to-LED vertical spacing requirements. The ELM 3-285 provides minimum height, while ELM 1-300 and ELM 3-300 provide maximum height within this product family.

Q: Do all substitute parts have the same packaging format?

A: Yes. All listed substitutes are packaged in bags, matching the ELM 1-295 packaging specification.

Q: Are moisture sensitivity considerations relevant for standoff selection?

A: All parts maintain MSL 1 (Unlimited) rating, indicating no moisture sensitivity restrictions. Storage and handling procedures do not require special environmental controls for any of these parts.

Q: Which substitute offers the best inventory availability?

A: ELM 3-300 provides the highest stock level at 9,596 pieces, followed by ELM 1-300 at 8,801 pieces. Both options ensure supply continuity for production requirements.