ELM 1-215 Equivalent & Substitute Parts Reference

Part Overview

The ELM 1-215 is a T1 3/4 LED standoff manufactured by Bivar Inc., designed for vertical mounting applications. This component features a black PVC construction with a 0.215" (5.46mm) length specification. The part maintains Active product status and is ROHS3 compliant, making it suitable for current production environments. Substitute parts are identified when equivalent functional performance can be achieved within the allowed mechanical and electrical parameter tolerances for this LED standoff category.

Substiute Parts

ELM 1-215

Bivar Inc.In Stock: 1115ELM 1-215 Datasheet

Current PartRFQ

ELM 1-220

Bivar Inc.In Stock: 1649ELM 1-220 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the ELM 1-215 is determined by the following critical parameters:

• LED Type: Must be T1 3/4 to maintain mechanical and optical compatibility
• Material: Must be PVC to ensure equivalent mechanical properties and environmental resistance
• Color: Must be Black to maintain visual consistency in assembly
• Series: Must belong to ELM 1 series to ensure design compatibility
• RoHS Compliance: Must maintain ROHS3 compliance for regulatory alignment
• Moisture Sensitivity Level: Must be MSL 1 or equivalent for storage and handling requirements

The ELM 1-220 qualifies as a parametric equivalent because it shares all critical parameters with the ELM 1-215. The length difference (0.220" versus 0.215") represents a 0.005" (0.13mm) variation within the mechanical tolerance envelope for this standoff category, allowing functional interchangeability in vertical mounting applications where this dimensional tolerance is acceptable.

Parameter Comparison

Engineering Selection Recommendations

Both ELM 1-215 and ELM 1-220 maintain Active product status with ROHS3 compliance and MSL 1 rating. Selection between these parts should be based on the specific length requirement of the application. The ELM 1-215 is specified for 0.215" (5.46mm) standoff height, while the ELM 1-220 provides 0.220" (5.59mm) height. The 0.005" (0.13mm) dimensional difference must be evaluated against the mechanical constraints of the target assembly. Both parts are manufactured by Bivar Inc. within the same ELM 1 series and share identical material, color, LED type, and compliance certifications.

Frequently Asked Questions (FAQ)

Q: Can ELM 1-220 be used as a direct replacement for ELM 1-215?

A: ELM 1-220 is a parametric equivalent within the allowed mechanical tolerance range. The 0.005" length difference must be compatible with the application's height requirements. Verify that the increased standoff height does not create interference or clearance issues in the target assembly.

Q: What determines substitution eligibility for ELM 1-215?

A: Substitutes must maintain identical LED type (T1 3/4), material (PVC), color (Black), series designation (ELM 1), RoHS compliance (ROHS3), and MSL rating (1). Length variations are acceptable within the mechanical tolerance envelope of the standoff category.

Q: Are there packaging differences between ELM 1-215 and ELM 1-220?

A: Both parts are supplied in Bag packaging. Inventory levels differ: ELM 1-215 has 1036 pieces in stock, while ELM 1-220 has 1594 pieces available.

Q: Do both parts share the same base product number?

A: Yes, both ELM 1-215 and ELM 1-220 share base product number ELM1-2, confirming their design family relationship within the ELM 1 series.

Q: What is the significance of MSL 1 rating for these standoffs?

A: MSL 1 (Unlimited) indicates these components have no moisture sensitivity restrictions and do not require special storage or handling conditions prior to assembly.