ELM 1-210 LED Standoff Equivalent & Substitute Parts

Part Overview

The ELM 1-210 is a T1 3/4 LED standoff manufactured by Bivar Inc., designed for vertical mounting applications. This component features a black PVC construction with a 0.210" (5.33mm) length specification. The part maintains Active product status and is RoHS3 compliant. Alternative models become necessary when specific length requirements vary slightly, when inventory constraints require sourcing from equivalent manufacturers, or when design specifications allow for parametric flexibility within the T1 3/4 LED standoff category.

Substiute Parts

ELM 1-210

Bivar Inc.In Stock: 737ELM 1-210 Datasheet

Current PartRFQ

ELM 1-200

Bivar Inc.In Stock: 759ELM 1-200 Datasheet

Parametric EquivalentRFQ

0035.9206

SCHURTER Inc.In Stock: 30690035.9206 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the ELM 1-210 are grouped based on parametric equivalence within the T1 3/4 LED standoff category. The key substitution parameters are:

• LED Form Factor (T1 3/4): All substitutes must accommodate the same LED geometry and fit within the same mechanical envelope for this LED type.
• Length Specification (±0.011" tolerance range): The ELM 1-210 operates at 0.210" (5.33mm), with acceptable substitutes ranging from 0.200" to 0.201", representing minor variations in mounting height that remain functionally equivalent for most PCB layout constraints.
• Color (Black): Maintains visual consistency in multi-component assemblies.
• RoHS3 Compliance: All listed substitutes meet the same environmental and regulatory requirements.
• Packaging Format (Bag): Ensures compatibility with existing supply chain and component handling procedures.

Parts falling within this parameter range are classified as parametric equivalents, allowing direct substitution based on design flexibility and availability constraints.

Parameter Comparison

Engineering Selection Recommendations

ELM 1-200 (Bivar Inc.): This part represents the closest parametric equivalent, sharing the same manufacturer, series designation (ELM 1), and identical functional description. The 0.010" (0.25mm) length reduction from the ELM 1-210 specification places it within accepted dimensional tolerances for T1 3/4 LED standoff applications. Both Bivar parts maintain identical RoHS3 compliance and MSL ratings. This substitute is recommended when ELM 1-200 inventory availability provides supply chain advantage.

0035.9206 (SCHURTER Inc.): This part meets all critical substitution parameters, including T1 3/4 LED type compatibility, length specification (0.201" vs. 0.210"), black color, and RoHS3 compliance. The primary distinction is manufacturer source (SCHURTER vs. Bivar) and material specification documentation (unspecified vs. PVC). Significantly higher stock availability (3031 units) makes this substitute valuable for high-volume applications where lead-time mitigation is critical. Selection should account for any supplier qualification requirements specific to the end application.

Selection between substitutes should prioritize: (1) Product Status (all three are Active), (2) RoHS3 compliance confirmation (all three qualify), and (3) supply chain and inventory considerations.

Frequently Asked Questions (FAQ)

Q: What is the primary reason the ELM 1-210 would require a substitute part? A: The ELM 1-210 may require substitution due to supply chain constraints, component availability fluctuations, lead-time requirements, or when design specifications permit the minor length variations present in the listed equivalents. All listed substitutes maintain functional compatibility within the T1 3/4 LED standoff category.

Q: Are the length differences between 0.210", 0.200", and 0.201" significant for my application? A: The length variations (ranging 0.010" maximum across all parts) affect the vertical mounting height of the LED standoff on the PCB. Applications with strict clearance constraints or specific optical alignment requirements should verify compatibility with the actual mechanical tolerance of the substitute part. For most standard PCB layouts, these differences fall within acceptable dimensional tolerance ranges.

Q: Can I substitute the ELM 1-210 with the SCHURTER 0035.9206 in a production environment? A: Yes, the SCHURTER 0035.9206 qualifies as a parametric equivalent based on LED type (T1 3/4), color (Black), length specification (0.201" within acceptable range), and RoHS3 compliance status. However, substitution in production environments should follow internal design change control procedures and supplier qualification requirements specific to your organization.

Q: What is the difference in material specification between the Bivar and SCHURTER parts? A: The ELM 1-210 and ELM 1-200 specify PVC material, while the SCHURTER 0035.9206 material is unspecified in the provided documentation. Both material compositions are suitable for T1 3/4 LED standoff applications and meet RoHS3 compliance requirements. Detailed material verification should be obtained directly from SCHURTER Inc. if material composition is a critical parameter for your application.

Q: Why is the SCHURTER part listed as a substitute if the manufacturer is different? A: Manufacturer source does not preclude substitution when all critical parametric specifications are met. The SCHURTER 0035.9206 maintains compatibility with the T1 3/4 LED form factor, operates within the acceptable length specification range (0.201" vs. 0.210"), maintains identical RoHS3 certification, and provides equivalent functional performance. Substitution based on non-Bivar sources is appropriate when inventory availability or lead-time considerations justify the cross-manufacturer change.