ELM 1-115 LED Standoff Equivalent & Substitute Parts

Part Overview

The ELM 1-115 is a T1 3/4 LED standoff manufactured by Bivar Inc., featuring a black PVC construction with a 0.115" (2.92mm) length. This component is classified as Active product status and is ROHS3 compliant. The ELM 1-115 serves as a vertical mounting solution for LED applications requiring precise standoff positioning. Substitute parts become necessary when inventory constraints occur, when alternative series options are preferred, or when slight dimensional variations are acceptable within application tolerances.

Substiute Parts

ELM 1-115

Bivar Inc.In Stock: 1185ELM 1-115 Datasheet

Current PartRFQ

ELM 1-3MM

Bivar Inc.In Stock: 6111ELM 1-3MM Datasheet

Parametric EquivalentRFQ

ELM 3-110

Bivar Inc.In Stock: 3264ELM 3-110 Datasheet

Parametric EquivalentRFQ

ELM 3-3MM

Bivar Inc.In Stock: 1873ELM 3-3MM Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the ELM 1-115 is determined by the following parameters: LED type (T1 3/4), material composition (black PVC), color (black), product status (Active), RoHS compliance (ROHS3), and MSL rating (1). Length variations within the ELM series are permitted substitutes when dimensional tolerance allows. The three qualified substitute parts—ELM 1-3MM, ELM 3-110, and ELM 3-3MM—maintain identical LED specifications and material properties while offering length variations of 0.120" (3.05mm), 0.110" (2.79mm), and 0.118" (3.00mm) respectively. All substitutes are manufactured by Bivar Inc., carry Active product status, and meet ROHS3 compliance requirements.

Parameter Comparison

Engineering Selection Recommendations

All four parts—ELM 1-115, ELM 1-3MM, ELM 3-110, and ELM 3-3MM—maintain Active product status and ROHS3 compliance, ensuring regulatory alignment and long-term supply viability. Selection between these parts should be based on application-specific length requirements. The ELM 1-115 and ELM 1-3MM belong to the ELM 1 series, while ELM 3-110 and ELM 3-3MM belong to the ELM 3 series. Length tolerance in the application determines which substitute is appropriate. All parts carry MSL rating 1, indicating unlimited moisture sensitivity protection and suitability for standard storage and handling conditions.

Frequently Asked Questions (FAQ)

Q: What determines if ELM 1-3MM can substitute for ELM 1-115? A: Both parts share identical LED type (T1 3/4), material (black PVC), color (black), RoHS compliance (ROHS3), and MSL rating (1). The primary difference is length: ELM 1-115 measures 0.115" (2.92mm) while ELM 1-3MM measures 0.120" (3.05mm). Substitution is valid when application tolerances accommodate this 0.005" (0.13mm) increase.

Q: Can ELM 3-series parts substitute for ELM 1-series parts? A: Yes. ELM 3-110 and ELM 3-3MM are qualified substitutes despite belonging to different series. All four parts maintain identical LED specifications, material composition, color, and compliance certifications. Series designation does not restrict substitution eligibility when core parameters align.

Q: What is the length range across all substitute options? A: The substitute parts span a length range from 0.110" (2.79mm) to 0.120" (3.05mm). ELM 3-110 is the shortest at 0.110", followed by ELM 1-115 at 0.115", ELM 3-3MM at 0.118", and ELM 1-3MM at 0.120" (longest).

Q: Are all substitutes ROHS3 compliant? A: Yes. ELM 1-115, ELM 1-3MM, ELM 3-110, and ELM 3-3MM are all ROHS3 compliant, meeting regulatory requirements for hazardous substance restrictions.

Q: What does MSL rating 1 mean for these parts? A: MSL (Moisture Sensitivity Level) rating 1 indicates unlimited moisture sensitivity protection. These parts require no special moisture control during storage, handling, or transportation.

Q: Are packaging specifications identical across all parts? A: Yes. All four parts are supplied in Bag packaging format, ensuring consistent handling and storage procedures.