ELM 1-105 LED Standoff Equivalent & Substitute Parts

Part Overview

The ELM 1-105 is a T1 3/4 LED standoff manufactured by Bivar Inc., designed for vertical mounting applications. This component features a black PVC construction with a 0.105" (2.67mm) length specification. The part maintains Active product status and is ROHS3 compliant, making it suitable for current production environments. Equivalent and substitute parts are identified based on shared electrical and mechanical parameters, enabling component selection flexibility when primary inventory is unavailable or when design specifications permit dimensional tolerance.

Substiute Parts

ELM 1-105

Bivar Inc.In Stock: 858ELM 1-105 Datasheet

Current PartRFQ

ELM 1-100

Bivar Inc.In Stock: 14558ELM 1-100 Datasheet

Parametric EquivalentRFQ

ELM 3-100

Bivar Inc.In Stock: 13575ELM 3-100 Datasheet

Parametric EquivalentRFQ

ELM 3-110

Bivar Inc.In Stock: 3264ELM 3-110 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the ELM 1-105 is determined by the following critical parameters:

Primary Substitution Criteria:

• LED Type: T1 3/4 (must match)
• Material: Black PVC (must match)
• Mounting Style: Vertical (must match)
• RoHS Compliance: ROHS3 Compliant (must match)
• Moisture Sensitivity Level: 1 (Unlimited) (must match)

Secondary Substitution Parameter:

• Length: 0.105" (2.67mm) nominal, with tolerance allowance for 0.100" (2.54mm) and 0.110" (2.79mm) variants

The ELM 1-100 and ELM 3-100 share identical LED type, material, mounting style, and compliance specifications with 0.100" (2.54mm) length. The ELM 3-110 maintains all core parameters with 0.110" (2.79mm) length. These dimensional variations fall within the mechanical tolerance range for T1 3/4 LED standoff applications.

Parameter Comparison

Engineering Selection Recommendations

ELM 1-100 Selection: The ELM 1-100 is the primary parametric equivalent, differing only in length specification (0.100" vs. 0.105"). Both parts share identical series designation (ELM 1), manufacturer, LED type, material composition, and compliance certifications. This substitute is appropriate when design specifications permit a 0.005" (0.127mm) length reduction. Inventory availability is significantly higher (14,460 units vs. 840 units).

ELM 3-100 Selection: The ELM 3-100 maintains all core electrical and mechanical parameters with identical length to the ELM 1-100 (0.100"). The primary distinction is series designation (ELM 3 vs. ELM 1) and HTSUS classification. This part is suitable for applications where series variation is acceptable. Inventory level is comparable to ELM 1-100 (13,503 units).

ELM 3-110 Selection: The ELM 3-110 provides a length specification of 0.110" (2.79mm), representing a 0.005" increase relative to the ELM 1-105 nominal dimension. This substitute is applicable when design specifications accommodate increased standoff height. Inventory availability is lower (3,253 units).

All substitute parts maintain Active product status and ROHS3 compliance, ensuring suitability for current production and regulatory requirements.

Frequently Asked Questions (FAQ)

Q: What is the primary difference between ELM 1-105 and ELM 1-100?

A: The parts are identical except for length specification. ELM 1-105 measures 0.105" (2.67mm), while ELM 1-100 measures 0.100" (2.54mm). Both share the same series, manufacturer, LED type, material, and compliance ratings.

Q: Can ELM 3-series parts substitute for ELM 1-series parts?

A: Yes. ELM 3-100 and ELM 3-110 are parametric equivalents to the ELM 1-105, sharing all critical specifications including LED type, material, mounting style, and compliance certifications. Series designation difference does not affect functional compatibility for T1 3/4 LED standoff applications.

Q: What length tolerance is acceptable for substitution?

A: The substitute parts provided range from 0.100" to 0.110" (2.54mm to 2.79mm), representing ±0.005" variation from the nominal 0.105" specification. Substitution is valid when design specifications permit this dimensional range.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. All listed substitute parts (ELM 1-100, ELM 3-100, ELM 3-110) maintain ROHS3 compliance status, matching the primary part ELM 1-105.

Q: What is the moisture sensitivity level for these parts?

A: All parts, including the main component and substitutes, carry MSL rating 1 (Unlimited), indicating no moisture sensitivity restrictions during storage or handling.

Q: Which substitute offers the highest inventory availability?

A: ELM 1-100 provides the highest inventory level at 14,460 units, compared to 840 units for the primary ELM 1-105 part.

Q: Do substitute parts share the same packaging specification?

A: Yes. All parts listed are supplied in Bag packaging format.