ELFT10160 Terminal Block Plug - Equivalent & Substitute Parts

Part Overview

The ELFT10160 is a 10-position terminal block plug manufactured by Amphenol PCD, designed for free-hanging in-line applications with 270° wire entry. This component is classified as active product status and is widely used in industrial control, automation, and power distribution systems where reliable screw-terminal connections are required. Substitute parts are identified to provide alternative sourcing options when the primary part is unavailable or when inventory constraints necessitate component alternatives that maintain electrical and mechanical compatibility.

Key Parameters

Parameter	Value
Manufacturer Part Number	ELFT10160
Manufacturer	Amphenol PCD
Category	Terminal Blocks
Number of Positions	10
Pitch	0.197" (5.00mm)
Plug Wire Entry	270°
Termination Style	Screw - Rising Cage Clamp
Current Rating (UL)	15 A
Voltage Rating (UL)	300 V
Wire Gauge (AWG)	12 AWG, 14-26 AWG
Operating Temperature	105°C
Mounting Type	Free Hanging (In-Line)
Product Status	Active
RoHS Status	RoHS Compliant

Substitute Part Grouping Explanation

Substitution of the ELFT10160 is permissible based on the following critical parameters that must remain constant:

Number of Positions: 10 positions (non-negotiable for connector mating)
Pitch: 0.197" (5.00mm) (determines physical spacing and compatibility)
Plug Wire Entry: 270° (defines orientation and installation requirements)
Termination Style: Screw - Rising Cage Clamp (ensures wire retention method compatibility)
Mounting Type: Free Hanging (In-Line) (specifies mechanical installation approach)
Current Rating (UL): 15 A minimum (electrical capacity requirement)
Voltage Rating (UL): 300 V minimum (electrical safety requirement)
Material Flammability Rating: UL94 V-0 (fire safety compliance)

The substitute part 1-284040-0 (TE Connectivity AMP Connectors, Buchanan series) satisfies all critical substitution criteria. Variations in wire gauge range, contact material, housing material, and color do not preclude substitution when the core electrical and mechanical parameters align.

Parameter Comparison

Parameter	ELFT10160 (Amphenol PCD)	1-284040-0 (TE Connectivity)	Compatibility Status
Number of Positions	10	10	Match
Pitch	0.197" (5.00mm)	0.197" (5.00mm)	Match
Plug Wire Entry	270°	270°	Match
Termination Style	Screw - Rising Cage Clamp	Screw - Rising Cage Clamp	Match
Mounting Type	Free Hanging (In-Line)	Free Hanging (In-Line)	Match
Current Rating (UL)	15 A	15 A	Match
Voltage Rating (UL)	300 V	300 V	Match
Material Flammability Rating	UL94 V-0	UL94 V-0	Match
Torque - Screw	0.79 Nm (7.0 Lb-In)	0.79 Nm (7.0 Lb-In)	Match
Contact Mating Finish	Tin	Tin	Match
Wire Gauge (AWG)	12 AWG, 14-26 AWG	12-30 AWG	Compatible (1-284040-0 supports wider range)
Operating Temperature	105°C	-40°C ~ 110°C	Compatible (1-284040-0 supports wider range)
Color	Black	Green	Differs (non-functional difference)
Contact Material	Copper Alloy	Phosphor Bronze	Differs (both acceptable for electrical performance)
Housing Material	Polyphenylene Oxide (PPO)	Polyamide (PA66), Nylon 6/6	Differs (both UL94 V-0 rated)

Engineering Selection Recommendations

The ELFT10160 and 1-284040-0 are functionally equivalent for applications requiring 10-position, 5mm-pitch terminal block plugs with 270° wire entry and screw-terminal connections. Both components maintain active product status and comply with RoHS requirements.

Selection between these parts should be based on:

Inventory Availability: ELFT10160 has 674 units in stock (Tray packaging); 1-284040-0 has 1227 units in stock (Bulk packaging)
Compliance Requirements: Both parts are RoHS Compliant and carry UL94 V-0 flammability ratings
Wire Gauge Requirements: If application requires wire gauges larger than 12 AWG or smaller than 14 AWG, 1-284040-0 (12-30 AWG range) provides broader accommodation
Temperature Range: If application operates below 0°C, 1-284040-0 (-40°C ~ 110°C) is required; ELFT10160 is rated to 105°C maximum
Packaging Format: ELFT10160 supplied in Tray; 1-284040-0 supplied in Bulk

Both parts are suitable for direct substitution in applications where the specified electrical and mechanical parameters are met.

Frequently Asked Questions (FAQ)

Q: Can 1-284040-0 directly replace ELFT10160 in existing designs?

A: Yes. Both parts share identical pitch (5.00mm), position count (10), wire entry angle (270°), termination method (screw-rising cage clamp), and electrical ratings (15 A, 300 V). The parts are mechanically and electrically interchangeable.

Q: What are the differences between these two parts?

A: Primary differences are non-functional: housing material (PPO vs. PA66), contact material (Copper Alloy vs. Phosphor Bronze), color (Black vs. Green), and wire gauge range (14-26 AWG vs. 12-30 AWG). The 1-284040-0 supports a wider operating temperature range (-40°C to 110°C vs. 105°C maximum).

Q: Does the color difference affect compatibility?

A: No. Color is a visual identifier only and does not affect electrical or mechanical performance. Both parts meet UL94 V-0 flammability requirements.

Q: Which part should be selected for low-temperature applications?

A: The 1-284040-0 is rated for -40°C to 110°C, making it suitable for applications below 0°C. The ELFT10160 is rated to 105°C maximum and is not specified for sub-zero operation.

Q: Are there packaging considerations when switching between these parts?

A: Yes. ELFT10160 is supplied in Tray packaging; 1-284040-0 is supplied in Bulk packaging. Verify that receiving and storage procedures accommodate the different packaging formats.

Q: Do both parts comply with RoHS requirements?

A: Yes. ELFT10160 is RoHS Compliant; 1-284040-0 is ROHS3 Compliant. Both meet current RoHS standards.

Q: Can wire gauges larger than 12 AWG be used with ELFT10160?

A: No. ELFT10160 is specified for 12 AWG and 14-26 AWG. The 1-284040-0 accommodates 12-30 AWG, providing support for larger wire gauges if required.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message