ELFH13290 Terminal Block Header - Equivalent & Substitute Parts

Part Overview

The ELFH13290 is a 13-position terminal block header manufactured by Amphenol PCD, designed for vertical through-hole mounting with 0.200" (5.08mm) pitch spacing. This component features male pins with 2-side shrouding and is rated for 15A at 300V UL. The part is currently active in production with 994 units in stock.

Substitute parts become necessary when the primary component experiences supply constraints, extended lead times, or when design flexibility permits acceptance of mechanically and electrically compatible alternatives that meet application requirements.

Substiute Parts

ELFH13290

Amphenol PCDIn Stock: 1027ELFH13290 Datasheet

Current PartRFQ

1753657

Phoenix ContactIn Stock: 11521753657 Datasheet

SimilarRFQ

1755613

Phoenix ContactIn Stock: 11641755613 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the ELFH13290 is determined by the following critical parameters:

• Position Count: Must equal 13 positions
• Pitch Tolerance: 0.200" (5.08mm) nominal, with 0.197" (5.00mm) acceptable as a near-equivalent metric standard
• Orientation: Vertical mounting required
• Mounting Method: Through-hole solder termination
• Electrical Performance: Minimum 12A current rating and 300V voltage rating
• Shrouding Configuration: 2-side or 4-side shrouding both acceptable for mechanical compatibility
• Compliance: UL94 V-0 flammability rating and RoHS compliance required

The Phoenix Contact COMBICON MSTBV series (1753657) and COMBICON MSTBVA series (1755613) meet these criteria with pitch variance of 0.003" (0.08mm), which is within acceptable mechanical tolerance for standard PCB footprints designed for 5.08mm pitch terminal blocks.

Parameter Comparison

Engineering Selection Recommendations

ELFH13290 (Primary Component) The Amphenol PCD ELFH13290 remains the specified component with active production status and adequate inventory. It delivers 15A UL current rating and meets UL94 V-0 flammability requirements with RoHS compliance.

1753657 (Phoenix Contact COMBICON MSTBV) This substitute is mechanically and electrically compatible for applications where the 12A UL current rating is sufficient. The 0.003" pitch variance is within standard PCB tolerance. The 2-side shrouding matches the original configuration. ROHS3 compliance and EAR99 export classification align with the primary part. This option is suitable when Amphenol PCD supply is constrained.

1755613 (Phoenix Contact COMBICON MSTBVA) This substitute provides identical electrical performance to part 1753657 with enhanced mechanical protection through 4-side shrouding. The increased shrouding does not affect PCB footprint compatibility for standard 5.08mm pitch designs. This option is preferred when additional mechanical robustness is required or when 2-side shrouded alternatives are unavailable.

Frequently Asked Questions (FAQ)

Q: Can the Phoenix Contact parts be used as direct replacements for the ELFH13290? A: Yes, both Phoenix Contact parts (1753657 and 1755613) are mechanically and electrically compatible substitutes. The 0.003" pitch difference is within standard PCB manufacturing tolerance for terminal block footprints. Both maintain the same 13-position vertical through-hole configuration and solder termination.

Q: What is the significance of the pitch difference between 5.08mm and 5.00mm? A: The 0.08mm difference represents a 1.6% variance. Standard PCB design tolerances for terminal block footprints accommodate this variation. Both pitches are industry-standard metric equivalents, and components are mechanically interchangeable on PCBs designed for either specification.

Q: How do the current ratings compare? A: The ELFH13290 is rated for 15A (UL), while both Phoenix Contact substitutes are rated for 12A (UL). For applications requiring the full 15A capacity, the ELFH13290 must be retained. For applications operating at or below 12A, either substitute is acceptable.

Q: What is the difference between the 2-side and 4-side shrouding options? A: The 1753657 features 2-side shrouding (matching the ELFH13290), while the 1755613 features 4-side shrouding for enhanced mechanical protection. Both configurations are compatible with standard PCB footprints. The 4-side option provides additional lateral support and is preferred in high-vibration or high-shock environments.

Q: Are there compliance or certification differences? A: Both substitutes maintain UL94 V-0 flammability rating and meet RoHS requirements (ROHS3 vs. RoHS Compliant). Both carry EAR99 export classification and the same HTSUS code. All three parts are suitable for regulated applications requiring these certifications.

Q: What packaging differences exist? A: The ELFH13290 is supplied in Tray packaging, while both Phoenix Contact substitutes are supplied in Bulk packaging. This affects handling and storage but does not impact component performance or compatibility.