ELFH13260 Terminal Block Header - Equivalent & Substitute Parts

Part Overview

The ELFH13260 is a 13-position terminal block header manufactured by Amphenol PCD, designed for vertical through-hole mounting with 5.08mm pitch spacing. This component features male pins with 2-side shrouding, solder termination, and is rated for 15A at 300V (UL). The part is currently active in production with 920 units in stock.

Equivalent and substitute parts are identified when designs require alternative sourcing, inventory optimization, or when the primary component becomes unavailable. Substitutes must maintain functional compatibility across electrical ratings, mechanical dimensions, and mounting characteristics.

Substiute Parts

ELFH13260

Amphenol PCDIn Stock: 942ELFH13260 Datasheet

Current PartRFQ

1753657

Phoenix ContactIn Stock: 11521753657 Datasheet

SimilarRFQ

1755613

Phoenix ContactIn Stock: 11641755613 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the ELFH13260 is determined by the following critical parameters:

Primary Compatibility Criteria:

• 13-position configuration with single level
• 5.0mm to 5.08mm pitch tolerance (0.197" to 0.200")
• Vertical through-hole mounting orientation
• Male pin header with shrouded design
• Solder termination
• Minimum 12A current rating (IEC) or 12A (UL)
• Minimum 300V voltage rating
• UL94 V-0 flammability classification

Identified Substitutes:

• Phoenix Contact 1753657 (COMBICON MSTBV series, 2-side shrouded)
• Phoenix Contact 1755613 (COMBICON MSTBVA series, 4-side shrouded)

Both Phoenix Contact alternatives meet the core electrical and mechanical requirements. The 1755613 variant provides enhanced shrouding (4-side vs. 2-side), which may offer improved EMI performance in certain applications but maintains full functional compatibility.

Parameter Comparison

Engineering Selection Recommendations

ELFH13260 (Primary Component) Select this part when the design specifies Amphenol PCD sourcing, requires the higher 15A UL current rating, or when PBT housing material is a requirement. This component is actively manufactured and maintains full inventory availability.

1753657 (Phoenix Contact COMBICON MSTBV) This substitute is suitable for applications where the 12A current rating satisfies design requirements and Phoenix Contact sourcing is acceptable. The 2-side shrouded configuration matches the original design intent. Housing material differs (polyamide vs. PBT), which may affect thermal or chemical resistance characteristics. ROHS3 compliance exceeds RoHS requirements. This part is actively produced with 1080 units in stock.

1755613 (Phoenix Contact COMBICON MSTBVA) This variant provides 4-side shrouding instead of 2-side, offering increased mechanical protection and potential EMI shielding benefits. Electrical ratings and termination characteristics remain equivalent to 1753657. Select this option when enhanced shrouding is beneficial to the application design. This part is actively produced with 1147 units in stock.

Pitch Tolerance Consideration The Phoenix Contact substitutes operate at 5.00mm pitch versus the ELFH13260 at 5.08mm pitch. This 0.08mm difference (approximately 1.6% variance) falls within standard PCB tolerance ranges for through-hole terminal block mounting. Mechanical compatibility is maintained across all three parts.

Frequently Asked Questions (FAQ)

Q: Can Phoenix Contact 1753657 or 1755613 be used as direct replacements for ELFH13260?

A: Both Phoenix Contact parts are functionally compatible substitutes. The 1753657 maintains identical 2-side shrouding, while 1755613 provides enhanced 4-side shrouding. All three parts share 13-position configuration, vertical through-hole mounting, solder termination, and equivalent voltage ratings. The 0.08mm pitch difference (5.00mm vs. 5.08mm) is within standard PCB tolerance for terminal block mounting.

Q: What is the current rating difference between ELFH13260 and the Phoenix Contact substitutes?

A: ELFH13260 is rated for 15A (UL), while both Phoenix Contact parts are rated for 12A (UL) and 12A (IEC). If the application requires the full 15A capacity, ELFH13260 must be used. For applications operating at or below 12A, the Phoenix Contact substitutes are suitable.

Q: How do the housing materials differ between these parts?

A: ELFH13260 uses Polybutylene Terephthalate (PBT), while both Phoenix Contact substitutes use Polyamide (PA) Nylon. Both materials meet UL94 V-0 flammability requirements. Material selection may affect thermal stability, chemical resistance, or mechanical properties depending on the application environment.

Q: What is the difference between Phoenix Contact 1753657 and 1755613?

A: Both parts are electrically and mechanically identical with the same 13-position, 5.00mm pitch, and solder termination. The primary difference is shrouding: 1753657 has 2-side shrouding (matching ELFH13260), while 1755613 has 4-side shrouding. The 4-side shrouding provides enhanced mechanical protection and may improve EMI performance.

Q: Are all three parts RoHS compliant?

A: Yes. ELFH13260 is RoHS Compliant, while both Phoenix Contact parts are ROHS3 Compliant, which represents an updated compliance standard. All three parts meet RoHS requirements.

Q: What is the pitch tolerance between these parts?

A: ELFH13260 operates at 0.200" (5.08mm) pitch, while Phoenix Contact parts operate at 0.197" (5.00mm) pitch. The 0.08mm difference is within standard PCB manufacturing tolerances for through-hole terminal block applications and does not affect mechanical compatibility.

Q: Are there any temperature rating differences?

A: ELFH13260 specifies -40°C to 105°C operating temperature. Phoenix Contact parts do not provide explicit operating temperature specifications in the available data. For applications with strict temperature requirements, verify Phoenix Contact specifications directly.