ELFH13210 Terminal Block Header - Equivalent & Substitute Parts

Part Overview

The ELFH13210 is a 13-position terminal block header manufactured by Amphenol PCD, designed for through-hole solder mounting applications. This component features male pins with 4-side shrouding, 0.200" (5.08mm) pitch spacing, and 90° right-angle orientation. The part is currently active in production with 678 units in stock. Terminal block headers of this specification are essential in applications requiring reliable electrical connections with standardized pitch spacing and mechanical stability across industrial and commercial equipment.

Substiute Parts

ELFH13210

Amphenol PCDIn Stock: 696ELFH13210 Datasheet

Current PartRFQ

1-796639-3

TE Connectivity AMP ConnectorsIn Stock: 8891-796639-3 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the ELFH13210 is determined by strict alignment of the following critical parameters:

Position Count & Pitch: The substitute part must have exactly 13 positions with 0.200" (5.08mm) pitch spacing to ensure mechanical and electrical compatibility with existing PCB layouts and mating connectors.

Header Configuration: The substitute must feature male pins with 4-side shrouding and 90° right-angle orientation to maintain identical form factor and mounting interface.

Electrical Ratings: Current rating of 15 A (UL) and voltage rating of 300 V (UL) are minimum requirements for functional equivalence in the intended application.

Mounting & Termination: Through-hole solder termination is mandatory for PCB integration compatibility.

Environmental & Compliance: Operating temperature range, UL94 V-0 flammability rating, and RoHS compliance status must be maintained or exceeded.

The substitute part 1-796639-3 (TE Connectivity AMP Connectors) meets all these criteria with identical position count, pitch, shrouding configuration, orientation, electrical ratings, and mounting method.

Parameter Comparison

Engineering Selection Recommendations

Both the ELFH13210 and 1-796639-3 are active production components with identical electrical and mechanical specifications for the critical parameters governing terminal block header substitution: position count, pitch, shrouding, orientation, current/voltage ratings, and mounting method.

The substitute part 1-796639-3 provides equivalent or superior performance in the following areas:

Temperature Range: The TE Connectivity part extends the upper operating temperature limit to 110°C, compared to 105°C for the Amphenol part, providing additional thermal margin in high-temperature applications.

Compliance: Both parts meet UL94 V-0 flammability requirements. The TE Connectivity part carries ROHS3 certification, meeting current regulatory standards.

Material Differences: While the housing material differs (PBT versus PA66/Nylon 6/6) and contact material differs (Brass versus Copper Alloy), both material combinations maintain the same UL94 V-0 flammability rating and provide equivalent electrical conductivity and reliability for the specified current and voltage ratings.

Physical Dimensions: The substitute part has a slightly increased insulation height (0.329" versus 0.319"), which may require verification in space-constrained PCB layouts.

Selection between these parts should be based on availability, lead time, cost considerations, and specific thermal or dimensional requirements of the application.

Frequently Asked Questions (FAQ)

Q: Can the 1-796639-3 be used as a direct replacement for the ELFH13210?

A: Yes. Both parts have identical position count (13), pitch spacing (0.200"/5.08mm), shrouding configuration (4-side), orientation (90° right angle), electrical ratings (15 A/300 V UL), and through-hole solder termination. They are mechanically and electrically interchangeable for standard applications.

Q: What are the key differences between these two parts?

A: The primary differences are housing material (PBT versus PA66/Nylon 6/6), contact material (Brass versus Copper Alloy), operating temperature upper limit (105°C versus 110°C), and insulation height (0.319" versus 0.329"). All differences are within acceptable engineering tolerances for terminal block header applications.

Q: Does the difference in housing material affect performance?

A: No. Both materials carry the same UL94 V-0 flammability rating and are suitable for the specified electrical and thermal operating conditions. Material selection is typically driven by cost, availability, and specific application requirements rather than functional performance.

Q: Is the increased insulation height of the substitute part a concern?

A: The 0.010" (0.26mm) increase in insulation height is minimal. Verify clearance in your specific PCB layout if space constraints exist near the terminal block header mounting area.

Q: Are both parts RoHS compliant?

A: Yes. The ELFH13210 is RoHS Compliant. The 1-796639-3 is ROHS3 Compliant, meeting current regulatory requirements.

Q: Can these parts be used interchangeably in existing designs?

A: Yes, provided the PCB layout accommodates the slight difference in insulation height (0.010"). The identical pitch, position count, and mounting footprint ensure mechanical compatibility with existing connector interfaces and mating components.