ELFH13160 Terminal Block Header - Equivalent & Substitute Parts

Part Overview

The ELFH13160 is a 13-position terminal block header manufactured by Amphenol PCD, designed for vertical through-hole mounting with 5.00mm pitch spacing. This component features male pins with 2-side shrouding and is rated for 15A at 300V UL specifications. The part is currently active in production with 1116 units in stock. Equivalent and substitute parts are identified for applications requiring alternative sourcing, inventory management, or specific compliance certifications.

Substiute Parts

ELFH13160

Amphenol PCDIn Stock: 1198ELFH13160 Datasheet

Current PartRFQ

1753657

Phoenix ContactIn Stock: 11521753657 Datasheet

SimilarRFQ

1755613

Phoenix ContactIn Stock: 11641755613 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the ELFH13160 is determined by the following critical parameters:

• Position Count & Pitch: All substitute parts must maintain 13 positions at 0.197" (5.00mm) pitch to ensure mechanical and electrical compatibility with mating connectors and PCB layouts.
• Orientation & Mounting: Vertical through-hole mounting is required for direct PCB substitution without redesign.
• Shrouding Configuration: The ELFH13160 features 2-side shrouding. Substitute 1753657 maintains 2-side shrouding; substitute 1755613 features 4-side shrouding, which provides enhanced insulation but may affect mating connector compatibility.
• Electrical Ratings: UL voltage rating of 300V is maintained across all substitutes. Current ratings vary: ELFH13160 supports 15A UL, while both Phoenix Contact substitutes support 12A UL. Applications requiring 15A operation must verify the substitute's current capacity.
• Compliance & Material: All parts meet UL94 V-0 flammability requirements. ELFH13160 is RoHS Compliant; substitutes are ROHS3 Compliant. Housing materials differ: ELFH13160 uses Polybutylene Terephthalate (PBT); substitutes use Polyamide (PA) Nylon.

Parameter Comparison

Engineering Selection Recommendations

ELFH13160 (Primary Part): Select when 15A UL current capacity is required. RoHS Compliant status applies to legacy compliance frameworks. PBT housing material provides thermal stability. Black color aids visual identification in dense connector arrays.

1753657 (Phoenix Contact COMBICON MSTBV): Direct mechanical and electrical substitute with identical 2-side shrouding configuration. Supports 12A UL operation, suitable for applications with current requirements below 15A. ROHS3 Compliant certification meets current regulatory standards. IEC ratings (12A at 400V) provide additional compliance documentation for international markets. Green housing color distinguishes from Amphenol parts. Polyamide housing offers chemical resistance in industrial environments.

1755613 (Phoenix Contact COMBICON MSTBVA): Functionally equivalent with enhanced 4-side shrouding for increased insulation coverage. Identical electrical specifications to 1753657 (12A UL, 300V). 4-side shrouding may affect compatibility with existing mating connectors designed for 2-side shrouded headers; mechanical fit verification is required before deployment. ROHS3 Compliant and IEC-rated. Suitable for applications prioritizing insulation performance over direct pin-for-pin compatibility.

Frequently Asked Questions (FAQ)

Q: Can 1753657 or 1755613 directly replace ELFH13160 in existing designs?

A: Both Phoenix Contact parts maintain the same 13-position, 5.00mm pitch vertical through-hole configuration. Part 1753657 with 2-side shrouding is mechanically compatible with mating connectors designed for ELFH13160. Part 1755613 with 4-side shrouding may require mating connector compatibility verification due to increased shroud coverage.

Q: What is the impact of the 15A to 12A current rating difference?

A: ELFH13160 supports 15A UL operation; both Phoenix Contact substitutes support 12A UL. Applications operating at currents between 12A and 15A must use ELFH13160. Applications at or below 12A can use either substitute without derating.

Q: Are there compliance differences between the parts?

A: ELFH13160 is RoHS Compliant; both substitutes are ROHS3 Compliant. All three parts meet UL94 V-0 flammability requirements. Phoenix Contact parts provide IEC ratings (12A at 400V) in addition to UL ratings, offering broader international compliance documentation.

Q: How do housing material differences affect performance?

A: ELFH13160 uses PBT (Polybutylene Terephthalate); substitutes use PA Nylon (Polyamide). Both materials meet UL94 V-0 flammability standards. PBT offers superior thermal stability; PA Nylon provides enhanced chemical resistance. Material selection depends on environmental exposure conditions.

Q: What is the significance of the 4-side shrouding in part 1755613?

A: 4-side shrouding provides complete insulation coverage around all four sides of the header. This configuration enhances electrical isolation and safety in high-density applications. However, mating connectors must be designed to accommodate the increased shroud dimensions. Verify mechanical compatibility before substitution.

Q: Can these parts be used interchangeably in new designs?

A: Yes, for applications operating at 12A or below with 300V UL requirements. Part selection should consider shrouding configuration (2-side vs. 4-side), housing material properties, and compliance certification requirements specific to the target market.