ELFH08210 Terminal Block Header - Equivalent & Substitute Parts

Part Overview

The ELFH08210 is an 8-position terminal block header manufactured by Amphenol PCD, designed for through-hole solder mounting applications. This shrouded male pin header operates at 15 A (UL) and 300 V (UL) with a 0.200" (5.08mm) pitch in a 90° right-angle configuration. The component is Active in product status and RoHS Compliant, making it suitable for industrial and commercial electronic assemblies requiring reliable wire-to-board connections. Equivalent substitute parts are identified based on matching electrical ratings, mechanical dimensions, and termination compatibility.

Substiute Parts

ELFH08210

Amphenol PCDIn Stock: 980ELFH08210 Datasheet

Current PartRFQ

796639-8

TE Connectivity AMP ConnectorsIn Stock: 937796639-8 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the ELFH08210 are qualified based on the following critical parameters that determine functional and mechanical compatibility:

• Electrical Compatibility: Current rating (UL) of 15 A and voltage rating (UL) of 300 V must be maintained or exceeded
• Mechanical Compatibility: 8 positions, 0.200" (5.08mm) pitch, 90° right-angle orientation, and through-hole mounting type must match exactly
• Connector Type: Male pins with 4-side shrouding configuration
• Termination Method: Solder termination required for PCB assembly compatibility
• Regulatory Compliance: RoHS Compliant status and UL94 V-0 flammability rating

The substitute part 796639-8 (TE Connectivity AMP Connectors) meets all critical parameters and is therefore a direct functional equivalent.

Parameter Comparison

Engineering Selection Recommendations

Both the ELFH08210 and 796639-8 are Active products with full RoHS Compliance and UL94 V-0 flammability certification. Selection between these parts should be based on:

• Availability: ELFH08210 has 929 pcs in stock; 796639-8 has 831 pcs in stock
• Operating Temperature: ELFH08210 operates to 105°C; 796639-8 operates to 110°C, providing extended thermal margin for applications requiring higher temperature performance
• Housing Material: ELFH08210 uses Polybutylene Terephthalate (PBT); 796639-8 uses Polyamide (PA66), Nylon 6/6
• Contact Material: ELFH08210 uses Brass; 796639-8 uses Copper Alloy

Both parts satisfy the core electrical and mechanical requirements for direct substitution in 8-position, 5.08mm pitch terminal block applications.

Frequently Asked Questions (FAQ)

Q: Can 796639-8 be used as a direct replacement for ELFH08210?

A: Yes. Both parts share identical electrical ratings (15 A UL, 300 V UL), mechanical configuration (8 positions, 5.08mm pitch, 90° right angle), and termination method (solder through-hole). Both are RoHS Compliant with UL94 V-0 flammability rating.

Q: What are the differences between these two parts?

A: The primary differences are housing material (PBT vs. PA66), contact material (Brass vs. Copper Alloy), maximum operating temperature (105°C vs. 110°C), and insulation height (0.319" vs. 0.329"). These differences do not affect functional compatibility in standard applications.

Q: Are there any compatibility concerns with PCB footprints?

A: Both parts use identical pitch (5.08mm), position count (8), and through-hole mounting type. PCB footprints designed for ELFH08210 are compatible with 796639-8. Minor dimensional variations in insulation height and contact tail length do not affect board-level assembly.

Q: Which part should be selected for high-temperature applications?

A: The 796639-8 supports operation to 110°C, compared to 105°C for ELFH08210, making it suitable for applications requiring extended thermal performance.

Q: Are both parts available in the same packaging?

A: Yes. Both parts are supplied in Bulk packaging and are suitable for automated assembly processes.