ELFH07260 Terminal Block Header - Equivalent & Substitute Parts

Part Overview

The ELFH07260 is a 7-position terminal block header manufactured by Amphenol PCD, designed for vertical through-hole mounting with 5.08mm pitch spacing. This shrouded male pin header operates at 15A (UL) and 300V (UL), suitable for industrial control and power distribution applications. The component is actively produced and RoHS compliant, with unlimited moisture sensitivity rating (MSL 1).

Substitute parts are identified to address inventory availability, regional sourcing requirements, or specific application constraints while maintaining electrical and mechanical compatibility within the allowed parameter ranges for this terminal block category.

Key Parameters

Parameter	Value
Number of Positions	7
Pitch	0.200" (5.08mm)
Header Orientation	Vertical
Type	Header, Male Pins, Shrouded (2 Side)
Mounting Type	Through Hole
Termination Style	Solder
Current Rating (UL)	15 A
Voltage Rating (UL)	300 V
Material Flammability Rating	UL94 V-0
Operating Temperature	-40°C ~ 105°C
RoHS Status	RoHS Compliant
MSL Rating	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution eligibility for the ELFH07260 is determined by the following critical parameters:

Position Count & Pitch: All substitutes must maintain 7 positions with pitch spacing between 0.197" (5.00mm) and 0.200" (5.08mm) to ensure PCB footprint compatibility
Header Type & Orientation: Vertical orientation with male pins and 2-side shrouding is mandatory
Electrical Ratings: Minimum 12A current capacity and 300V voltage rating (UL) required
Mounting & Termination: Through-hole solder termination only
Compliance: UL94 V-0 flammability rating and RoHS compliance required
Temperature Range: Operating range must encompass or exceed -40°C minimum

The identified substitutes meet these criteria within acceptable mechanical and electrical tolerances for terminal block headers in this category.

Parameter Comparison

Parameter	ELFH07260 (Amphenol PCD)	1753534 (Phoenix Contact)	282825-7 (TE Connectivity)
Manufacturer Part Number	ELFH07260	1753534	282825-7
Series	ELFH	COMBICON MSTBV	Buchanan
Number of Positions	7	7	7
Pitch	0.200" (5.08mm)	0.197" (5.00mm)	0.200" (5.08mm)
Header Orientation	Vertical	Vertical	Vertical
Type	Header, Male Pins, Shrouded (2 Side)	Header, Male Pins, Shrouded (2 Side)	Header, Male Pins, Shrouded (2 Side)
Mounting Type	Through Hole	Through Hole	Through Hole
Termination Style	Solder	Solder	Solder
Current Rating (UL)	15 A	12 A	15 A
Voltage Rating (UL)	300 V	300 V	300 V
Material Flammability Rating	UL94 V-0	UL94 V-0	UL94 V-0
Contact Mating Finish	Tin	Tin	Tin
Contact Tail Length	0.155" (3.94mm)	0.154" (3.90mm)	0.138" (4.60mm)
Insulation Height	0.475" (12.07mm)	0.472" (12.00mm)	0.472" (12.00mm)
RoHS Status	RoHS Compliant	ROHS3 Compliant	ROHS3 Compliant
MSL Rating	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)
Product Status	Active	Active	Active

Engineering Selection Recommendations

282825-7 (TE Connectivity) provides direct electrical and mechanical equivalence to the ELFH07260. Both components share identical 5.08mm pitch, 15A current rating, and 300V voltage specification. This substitute is preferred for applications requiring exact pitch matching and equivalent current capacity. ROHS3 compliance and active product status ensure long-term availability.

1753534 (Phoenix Contact) is suitable where pitch tolerance of ±0.003" (0.08mm) is acceptable. The 5.00mm pitch represents a 0.08mm reduction from the ELFH07260 specification. Current rating is reduced to 12A, making this substitute appropriate for applications with maximum current requirements below 12A. ROHS3 compliance and active status are confirmed.

All three components maintain UL94 V-0 flammability rating, unlimited MSL rating, and active product status, ensuring compliance with industrial control and power distribution standards.

Frequently Asked Questions (FAQ)

Q: Can the 1753534 be used in place of the ELFH07260 on existing PCBs?

A: The 1753534 operates at 5.00mm pitch versus the ELFH07260's 5.08mm pitch. PCB footprints designed for 5.08mm spacing will not accommodate the 5.00mm pitch without layout modification. Mechanical compatibility cannot be guaranteed without design review.

Q: What is the current capacity difference between substitutes?

A: The ELFH07260 and 282825-7 both support 15A (UL). The 1753534 is rated for 12A (UL). Selection depends on circuit current requirements. For applications exceeding 12A, use ELFH07260 or 282825-7.

Q: Are all substitutes RoHS compliant?

A: Yes. The ELFH07260 is RoHS Compliant. Both 1753534 and 282825-7 are ROHS3 Compliant, meeting current RoHS Directive requirements.

Q: What are the contact tail length differences?

A: ELFH07260: 0.155" (3.94mm), 1753534: 0.154" (3.90mm), 282825-7: 0.138" (4.60mm). Shorter tail lengths may affect solder joint formation on PCBs with standard through-hole depths. Verify PCB design compatibility.

Q: Do all parts have the same operating temperature range?

A: The ELFH07260 operates -40°C to 105°C. The 282825-7 extends to 110°C. The 1753534 operating temperature range was not provided. For applications requiring extended high-temperature operation, verify specific requirements with the manufacturer.

Q: What packaging formats are available?

A: ELFH07260 is supplied in Tray packaging. Both 1753534 and 282825-7 are supplied in Bulk packaging. Confirm packaging requirements for your procurement and assembly processes.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message