ELFH07190 Equivalent & Substitute Parts

Part Overview

The ELFH07190 is a 7-position terminal block header manufactured by Amphenol PCD. This component features male pins with 2-side shrouding, a 0.197" (5.00mm) pitch, and vertical through-hole mounting. The part is designed for solder termination applications requiring secure electrical connections in industrial and commercial equipment. As an active product with full inventory availability, equivalent alternatives exist to support supply chain flexibility and design optimization across compatible applications.

Substiute Parts

ELFH07190

Amphenol PCDIn Stock: 1135ELFH07190 Datasheet

Current PartRFQ

1753534

Phoenix ContactIn Stock: 28181753534 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the ELFH07190 is determined by strict alignment of the following critical parameters:

• Position Count & Pitch: Both main and substitute parts must maintain 7 positions at 0.197" (5.00mm) pitch to ensure mechanical and electrical compatibility with mating connectors and PCB layouts.
• Header Configuration: Male pins with 2-side shrouding are required to match the original design intent and prevent cross-mating with incompatible receptacles.
• Mounting & Termination: Vertical through-hole solder termination must be preserved to maintain assembly process compatibility.
• Electrical Ratings: Voltage and current ratings must meet or exceed the original specification (300 V UL, 15 A UL) to ensure safe operation in the intended application.
• Environmental & Compliance: UL94 V-0 flammability rating and RoHS compliance are mandatory for regulatory and safety requirements.

The Phoenix Contact 1753534 qualifies as a direct substitute based on these criteria.

Parameter Comparison

Engineering Selection Recommendations

Both the ELFH07190 and 1753534 are active products with full RoHS compliance and UL94 V-0 flammability certification. The Phoenix Contact 1753534 is electrically and mechanically compatible as a substitute, with the following considerations based on provided specifications:

• Current Rating Difference: The ELFH07190 is rated for 15 A (UL), while the 1753534 is rated for 12 A (UL). Applications requiring the full 15 A capacity should retain the original ELFH07190.
• Mechanical Dimensions: Contact tail length and insulation height are within 0.001" (0.04mm) tolerance, ensuring compatibility with standard PCB footprints and mating connectors.
• Voltage Rating: Both parts meet the 300 V UL requirement.
• Compliance: Both parts satisfy RoHS requirements and UL94 V-0 flammability standards for regulated applications.

Frequently Asked Questions (FAQ)

Q: Can the Phoenix Contact 1753534 be used in place of the ELFH07190 in all applications?

A: The 1753534 is mechanically and electrically compatible for applications operating at 12 A or below. Applications requiring the full 15 A capacity of the ELFH07190 should use the original part.

Q: Are the physical dimensions identical between these parts?

A: Contact tail length and insulation height differ by less than 0.05mm, which is within standard PCB footprint tolerances. Both parts are compatible with standard 5.00mm pitch connector receptacles.

Q: What is the difference in packaging between these parts?

A: The ELFH07190 is supplied in trays, while the 1753534 is supplied in bulk packaging. This affects inventory management and handling but does not impact electrical or mechanical performance.

Q: Do both parts meet the same regulatory standards?

A: Both parts are RoHS compliant and carry UL94 V-0 flammability certification. The 1753534 additionally carries ROHS3 compliance and REACH Unaffected status.

Q: What is the color difference, and does it affect functionality?

A: The ELFH07190 is black, while the 1753534 is green. Color is a visual identifier only and does not affect electrical performance or compatibility.