ELFH07160 Equivalent & Substitute Parts

Part Overview

The ELFH07160 is a 7-position terminal block header manufactured by Amphenol PCD. This component features male pins with 2-side shrouding, a 0.197" (5.00mm) pitch, and vertical through-hole mounting. The part is rated for 15 A (UL) at 300 V (UL) and operates across -40°C to 105°C. It is currently in active production status with RoHS compliance and MSL 1 rating.

Terminal block headers are essential interconnection components in industrial control systems, power distribution, and signal routing applications. Equivalent and substitute parts are identified to support supply chain continuity, inventory optimization, and design flexibility when the primary part becomes unavailable or when alternative sourcing is required.

Substiute Parts

ELFH07160

Amphenol PCDIn Stock: 968ELFH07160 Datasheet

Current PartRFQ

1753534

Phoenix ContactIn Stock: 28181753534 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the ELFH07160 is determined by strict alignment of the following critical parameters:

• Position Count & Pitch: 7 positions at 0.197" (5.00mm) spacing
• Connector Type & Orientation: Male pin header with 2-side shrouding, vertical mounting
• Electrical Ratings: Minimum 300 V (UL) and 12 A or higher (UL) current capacity
• Mounting & Termination: Through-hole solder termination
• Compliance: RoHS compliance and UL94 V-0 flammability rating
• Environmental: Operating temperature range and MSL 1 rating

The substitute part 1753534 (Phoenix Contact COMBICON MSTBV series) meets these criteria with equivalent mechanical and electrical specifications, enabling direct functional replacement in applications requiring 7-position, 5mm-pitch terminal block headers.

Parameter Comparison

Engineering Selection Recommendations

Both the ELFH07160 and 1753534 are active production components with equivalent mechanical and electrical specifications. Selection between these parts is based on the following factors:

ELFH07160 (Amphenol PCD): Provides 15 A current capacity at 300 V, RoHS compliance, and tray packaging. Suitable for applications requiring maximum current handling within the 5mm pitch terminal block category.

1753534 (Phoenix Contact): Provides 12 A current capacity at 300 V, ROHS3 compliance, and bulk packaging. Suitable for applications where 12 A current capacity is sufficient and alternative sourcing or inventory management is required.

Both parts maintain UL94 V-0 flammability rating, tin contact mating finish, and MSL 1 moisture sensitivity level. Mechanical dimensions are equivalent within manufacturing tolerances. Selection should be based on application current requirements, supply availability, and packaging preferences.

Frequently Asked Questions (FAQ)

Q: Can 1753534 directly replace ELFH07160 in existing designs?

A: Yes, provided the application current requirement does not exceed 12 A. Both parts share identical pitch (5.00mm), position count (7), orientation (vertical), mounting type (through-hole), and flammability rating (UL94 V-0). Mechanical dimensions are equivalent within standard tolerances.

Q: What is the primary difference between these two parts?

A: The ELFH07160 is rated for 15 A (UL), while the 1753534 is rated for 12 A (UL). Both maintain 300 V (UL) voltage rating. Housing material differs: ELFH07160 uses Polybutylene Terephthalate (PBT), while 1753534 uses Polyamide (PA) Nylon. Packaging differs: ELFH07160 is supplied in trays, 1753534 in bulk.

Q: Are there compliance differences between these parts?

A: Both parts are RoHS compliant. ELFH07160 carries RoHS Compliant status, while 1753534 carries ROHS3 Compliant status. Both maintain UL94 V-0 flammability rating and MSL 1 moisture sensitivity level.

Q: What are the mechanical dimension tolerances?

A: Contact tail length differs by 0.001" (0.04mm): ELFH07160 is 0.155" (3.94mm), 1753534 is 0.154" (3.90mm). Insulation height differs by 0.003" (0.07mm): ELFH07160 is 0.475" (12.07mm), 1753534 is 0.472" (12.00mm). These differences are within standard manufacturing tolerances for this component category.

Q: How does packaging affect component selection?

A: ELFH07160 is supplied in trays, suitable for automated assembly and controlled inventory management. 1753534 is supplied in bulk, suitable for high-volume applications or alternative sourcing scenarios. Packaging choice does not affect electrical or mechanical performance.