ELFH06220 Terminal Block Header - Equivalent & Substitute Parts

Part Overview

The ELFH06220 is a 6-position terminal block header manufactured by Amphenol PCD, designed for through-hole solder mounting applications. This component features male pins with 2-side shrouding, 90° right-angle orientation, and 5.08mm pitch spacing. The part is currently active in production with 993 units in stock. Equivalent and substitute parts are identified to support procurement flexibility, inventory management, and design compatibility across manufacturing environments where pin configuration, electrical ratings, and mechanical dimensions align with application requirements.

Key Parameters

Parameter	Value
Number of Positions	6
Pitch	0.200" (5.08mm)
Header Orientation	90°, Right Angle
Type	Header, Male Pins, Shrouded (2 Side)
Termination Style	Solder
Mounting Type	Through Hole
Current Rating (UL)	15 A
Voltage Rating (UL)	300 V
Operating Temperature	-40°C ~ 105°C
Material Flammability Rating	UL94 V-0
RoHS Status	RoHS Compliant

Substitute Part Grouping Explanation

Substitution eligibility is determined by the following critical parameters:

Electrical Compatibility: Current rating (15 A UL), voltage rating (300 V UL), and contact material (brass) must match or exceed the main part specifications.
Mechanical Compatibility: Number of positions (6), header orientation (90° right angle), and termination style (solder through-hole) must be identical.
Pitch Tolerance: Pitch spacing of 0.200" (5.08mm) or 0.197" (5.00mm) represents industry-standard Eurostyle spacing and is acceptable for equivalent substitution within connector mating specifications.
Shrouding Configuration: 2-side shrouding is the primary substitution criterion; 4-side shrouding represents a different mechanical envelope and is listed separately.
Environmental Compliance: RoHS compliance and UL94 V-0 flammability rating are required for equivalent substitution.

Three substitute parts meet these criteria: Molex 0395325006 (exact pitch match, 2-side shrouding), Molex 0395220006 (5.00mm pitch, 2-side shrouding), and Molex 0395226006 (5.00mm pitch, 4-side shrouding).

Parameter Comparison

Parameter	ELFH06220 (Amphenol)	0395325006 (Molex)	0395220006 (Molex)	0395226006 (Molex)
Manufacturer	Amphenol PCD	Molex	Molex	Molex
Number of Positions	6	6	6	6
Pitch	0.200" (5.08mm)	0.200" (5.08mm)	0.197" (5.00mm)	0.197" (5.00mm)
Header Orientation	90°, Right Angle	90°, Right Angle	90°, Right Angle	90°, Right Angle
Shrouding	2 Side	2 Side	2 Side	4 Side
Type	Header, Male Pins, Shrouded	Header, Male Pins, Shrouded	Header, Male Pins, Shrouded	Header, Male Pins, Shrouded
Termination Style	Solder	Solder	Solder	Solder
Mounting Type	Through Hole	Through Hole	Through Hole	Through Hole
Current Rating (UL)	15 A	15 A	15 A	15 A
Voltage Rating (UL)	300 V	300 V	300 V	300 V
Operating Temperature	-40°C ~ 105°C	-40°C ~ 105°C	-40°C ~ 105°C	-40°C ~ 105°C
Material Flammability Rating	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0
Contact Material	Brass	Brass	Brass	Brass
Contact Mating Finish	Tin	Tin	Tin	Tin
RoHS Status	RoHS Compliant	ROHS3 Compliant	ROHS3 Compliant	Not Specified
Inventory (Pcs)	993	1669	3763	5037

Engineering Selection Recommendations

Primary Substitute: Molex 0395325006

This part provides exact pitch matching (0.200" / 5.08mm) and identical 2-side shrouding configuration to the ELFH06220. Electrical ratings, operating temperature range, and flammability certification are equivalent. ROHS3 compliance exceeds RoHS requirements. This part is the preferred substitute for direct mechanical and electrical interchangeability.

Secondary Substitute: Molex 0395220006

This part operates at 0.197" (5.00mm) pitch, representing industry-standard Eurostyle spacing. All electrical ratings, temperature range, and flammability certification match the main part. ROHS3 compliance is confirmed. The 0.3mm pitch difference is within Eurostyle connector tolerance specifications and is suitable for applications where connector mating compatibility is verified. Higher inventory availability (3763 units) supports procurement continuity.

Alternative Substitute: Molex 0395226006

This part matches the 0.197" (5.00mm) pitch of the 0395220006 but features 4-side shrouding instead of 2-side. Electrical ratings and operating temperature are identical. This configuration provides enhanced mechanical protection and is suitable only for applications where the increased shrouding envelope does not conflict with PCB layout or connector mating requirements. RoHS status is not specified by the vendor.

Frequently Asked Questions (FAQ)

Q: Can Molex 0395325006 be used as a direct replacement for ELFH06220?

A: Yes. The 0395325006 matches the ELFH06220 in pitch (5.08mm), shrouding configuration (2-side), electrical ratings (15 A / 300 V), operating temperature (-40°C to 105°C), and flammability certification (UL94 V-0). No design modification is required.

Q: What is the difference between 5.08mm and 5.00mm pitch?

A: The 0.3mm difference represents the spacing between adjacent pin centers. Both pitches conform to Eurostyle terminal block standards. Connector mating compatibility depends on the receptacle design. Verify that the mating connector accepts 5.00mm pitch before substituting the 0395220006 or 0395226006.

Q: Can the 4-side shrouded Molex 0395226006 replace the 2-side shrouded ELFH06220?

A: Electrically and thermally, yes. Mechanically, the 4-side shrouding increases the overall envelope dimensions. Confirm that PCB layout, connector clearance, and mating receptacle accommodate the larger shrouding profile before substitution.

Q: Are all substitute parts RoHS compliant?

A: The ELFH06220 is RoHS Compliant. Molex 0395325006 and 0395220006 are ROHS3 Compliant, which exceeds RoHS requirements. Molex 0395226006 does not specify RoHS status; verify compliance with your procurement requirements before selection.

Q: What is the contact tail length difference between the main part and substitutes?

A: ELFH06220 has a contact tail length of 0.155" (3.94mm). All Molex substitutes have 0.150" (3.81mm) tail length. This 0.005" difference is within standard PCB through-hole tolerance and does not affect solder joint quality or mechanical retention.

Q: Which substitute has the highest inventory availability?

A: Molex 0395226006 has 5037 units in stock, followed by 0395220006 with 3763 units, and 0395325006 with 1669 units. Inventory levels support procurement planning for high-volume applications.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message