ELFH06190 Terminal Block Header - Equivalent & Substitute Parts

Part Overview

The ELFH06190 is a 6-position terminal block header manufactured by Amphenol PCD, designed for vertical through-hole mounting with 5.00mm pitch spacing. This component features male pins with 2-side shrouding and is rated for 15A at 300V UL. The part is currently active in production with 982 units in stock. Equivalent and substitute parts are identified when design requirements necessitate alternative sourcing, inventory constraints, or specific manufacturing preferences while maintaining electrical and mechanical compatibility.

Substiute Parts

ELFH06190

Amphenol PCDIn Stock: 1037ELFH06190 Datasheet

Current PartRFQ

0395211006

MolexIn Stock: 108570395211006 Datasheet

SimilarRFQ

1753518

Phoenix ContactIn Stock: 13331753518 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the ELFH06190 are qualified based on the following critical parameters that determine functional interchangeability:

• Position Count & Pitch: All substitutes maintain 6 positions at 0.197" (5.00mm) pitch, ensuring PCB footprint compatibility
• Orientation & Mounting: Vertical through-hole mounting is preserved across all alternatives
• Electrical Ratings: Current and voltage ratings must meet or exceed the original specification (15A / 300V UL minimum)
• Termination Method: Solder termination is consistent across all parts
• Flammability & Compliance: UL94 V-0 rating and RoHS compliance are maintained

The identified substitutes are Molex 0395211006 and Phoenix Contact 1753518. Both maintain the core electrical and mechanical parameters required for direct substitution in applications designed for the ELFH06190.

Parameter Comparison

Engineering Selection Recommendations

Molex 0395211006: This substitute maintains full electrical equivalence with 15A current rating and 300V voltage rating. It offers ROHS3 compliance and identical operating temperature range. The primary design difference is 4-side shrouding versus 2-side on the original part, which provides enhanced EMI shielding and mechanical protection. Contact tail length is 0.025" shorter, requiring PCB pad verification for through-hole depth compatibility. This part is actively produced with higher inventory availability (10,825 units).

Phoenix Contact 1753518: This substitute maintains mechanical and thermal compatibility with identical pitch, orientation, and mounting type. Current rating is 12A under UL specification, which is lower than the original 15A rating. Voltage rating remains at 300V UL. The part features 2-side shrouding matching the original configuration and contact tail length of 0.154" (3.90mm), providing superior PCB pad compatibility. ROHS3 compliance and MSL 1 rating are equivalent. Operating temperature specification is not provided for this part.

Both substitutes are actively produced components with established supply chains and full RoHS compliance certification.

Frequently Asked Questions (FAQ)

Q: Can the Molex 0395211006 be used as a direct replacement for the ELFH06190?

A: The Molex 0395211006 is electrically and mechanically compatible for applications requiring 15A at 300V. The primary consideration is the 4-side shrouding design versus 2-side on the original part. Contact tail length differs by 0.025", requiring verification that PCB through-hole depth accommodates the shorter tail. PCB footprint spacing remains identical at 5.00mm pitch.

Q: What is the significance of the shrouding configuration difference?

A: The ELFH06190 and Phoenix Contact 1753518 feature 2-side shrouding, while the Molex 0395211006 features 4-side shrouding. Shrouding configuration affects mechanical protection and EMI performance but does not impact electrical compatibility. 4-side shrouding provides additional shielding and mechanical robustness in high-vibration or high-EMI environments.

Q: Is the Phoenix Contact 1753518 suitable for applications rated at 15A?

A: The Phoenix Contact 1753518 is rated for 12A under UL specification, which is below the original 15A rating. This part is suitable only for applications with maximum current requirements of 12A or less. For applications requiring the full 15A capacity, the Molex 0395211006 is the appropriate substitute.

Q: Are there differences in contact tail length that affect PCB design?

A: Yes. The ELFH06190 has a contact tail length of 0.155" (3.94mm), the Molex 0395211006 has 0.130" (3.30mm), and the Phoenix Contact 1753518 has 0.154" (3.90mm). These variations require PCB pad depth verification to ensure proper solder joint formation. The Phoenix Contact part provides the closest dimensional match to the original.

Q: Do all three parts meet current RoHS requirements?

A: Yes. The ELFH06190 is RoHS Compliant, while both substitutes (Molex 0395211006 and Phoenix Contact 1753518) are ROHS3 Compliant, representing the current regulatory standard.

Q: What is the operating temperature range for the Phoenix Contact 1753518?

A: The operating temperature range is not specified in the available technical data for the Phoenix Contact 1753518. The ELFH06190 and Molex 0395211006 both specify -40°C ~ 105°C. Verification with Phoenix Contact technical documentation is required for temperature-critical applications.