ELFH06180 Terminal Block Header - Equivalent & Substitute Parts

Part Overview

The ELFH06180 is a 6-position terminal block header manufactured by Amphenol PCD, designed for vertical through-hole mounting with 5.00mm pitch spacing. This component is actively produced and stocked with 697 units available. Terminal block headers serve as connection interfaces in electronic assemblies, enabling reliable wire-to-board termination in industrial and commercial applications. Identifying equivalent substitute parts ensures design flexibility, supply chain continuity, and access to alternative inventory sources when the primary component becomes unavailable.

Substiute Parts

ELFH06180

Amphenol PCDIn Stock: 783ELFH06180 Datasheet

Current PartRFQ

0395211006

MolexIn Stock: 108570395211006 Datasheet

SimilarRFQ

1753518

Phoenix ContactIn Stock: 13331753518 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the ELFH06180 are identified based on strict electrical and mechanical compatibility criteria. The following parameters must match or exceed the main part specifications:

• Number of positions: 6
• Pitch spacing: 0.197" (5.00mm)
• Header orientation: Vertical
• Termination style: Solder
• Mounting type: Through hole
• Voltage rating: Minimum 300 V (UL)
• Current rating: Minimum 15 A (UL)
• Material flammability: UL94 V-0
• Operating temperature range: -40°C ~ 105°C minimum

The identified substitutes meet these core electrical and mechanical requirements, enabling direct functional replacement in circuit designs.

Parameter Comparison

Engineering Selection Recommendations

All three components maintain active product status with continuous manufacturing support. The ELFH06180 and 0395211006 are electrically equivalent, both rated at 15 A and 300 V with identical pitch and position configurations. Both components feature 4-side shrouding and are RoHS compliant.

The 1753518 (Phoenix Contact) provides functional substitution with the following considerations: it maintains the 6-position, 5.00mm pitch vertical configuration and meets the 300 V voltage requirement. However, the current rating is 12 A, which is lower than the primary part's 15 A rating. This component features 2-side shrouding instead of 4-side shrouding. Operating temperature range is not specified for this part. All three components carry UL94 V-0 flammability ratings and MSL 1 moisture sensitivity levels.

Selection should prioritize the ELFH06180 or 0395211006 when 15 A current capacity is required. The 1753518 is suitable for applications with maximum current requirements of 12 A or less.

Frequently Asked Questions (FAQ)

Q: Can the 1753518 directly replace the ELFH06180 in all applications?

A: The 1753518 provides functional substitution for applications requiring 12 A or less. Applications requiring the full 15 A current rating must use either the ELFH06180 or 0395211006. The 2-side shrouding of the 1753518 differs from the 4-side shrouding of the primary part, which may affect mechanical fit in constrained mounting spaces.

Q: Are all three parts RoHS compliant?

A: Yes. The ELFH06180 is RoHS Compliant. Both substitute parts (0395211006 and 1753518) are ROHS3 Compliant, representing updated compliance certification.

Q: What is the significance of the shrouding difference between the parts?

A: The ELFH06180 and 0395211006 feature 4-side shrouding, providing complete perimeter protection. The 1753518 features 2-side shrouding, providing protection on two sides only. Shrouding configuration affects mechanical fit, insertion force, and physical protection during assembly and operation.

Q: Do all parts have the same operating temperature range?

A: The ELFH06180 and 0395211006 both specify -40°C ~ 105°C operating temperature range. The 1753518 does not provide an operating temperature specification in the available data.

Q: Are there packaging differences between these parts?

A: Yes. The ELFH06180 is supplied in Tray packaging with 697 units in stock. Both substitute parts (0395211006 and 1753518) are supplied in Bulk packaging, with 10,825 and 1,230 units in stock respectively.