ELC-09D562F Equivalent & Substitute Parts

Part Overview

The ELC-09D562F is a 5.6 mH unshielded wirewound inductor manufactured by Panasonic Electronic Components, rated for 110 mA maximum current with 12.6Ohm DC resistance. This component is classified as obsolete, making identification of functionally equivalent alternatives essential for ongoing design support and production continuity. Substitute parts must maintain the same inductance value, current rating tolerance, and through-hole radial mounting configuration to ensure direct compatibility in existing circuit designs.

Substiute Parts

ELC-09D562F

Panasonic Electronic ComponentsIn Stock: 1104ELC-09D562F Datasheet

Current PartRFQ

RL895-562K-RC

Bourns Inc.In Stock: 896RL895-562K-RC Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the ELC-09D562F is determined by the following critical parameters:

• Inductance Value: Must be 5.6 mH with ±10% tolerance to maintain circuit performance
• Current Rating: Substitute must support minimum 110 mA operation
• DC Resistance: Must be within acceptable range for power dissipation calculations (12.6Ohm reference)
• Mounting Configuration: Through-hole radial, vertical cylinder package required for PCB compatibility
• Shielding Type: Unshielded configuration must be maintained
• Compliance: ROHS3 compliance required for regulatory alignment

The RL895-562K-RC from Bourns Inc. meets all substitution criteria with equivalent inductance, higher current rating (120 mA), comparable DC resistance (11.5Ohm max), and identical mounting configuration.

Parameter Comparison

Engineering Selection Recommendations

The RL895-562K-RC qualifies as a direct substitute for the ELC-09D562F based on electrical and mechanical parameter alignment. The Bourns component provides superior availability as an active product, ensuring long-term supply chain stability. Both parts maintain ROHS3 compliance and identical inductance specifications. The RL895-562K-RC offers a 10 mA higher current rating and 1.1Ohm lower maximum DC resistance, representing equivalent or improved performance characteristics for the specified application. Selection of the active Bourns part eliminates obsolescence risk while maintaining full functional compatibility.

Frequently Asked Questions (FAQ)

Q: Can the RL895-562K-RC directly replace the ELC-09D562F without circuit modification?

A: Yes. Both inductors share identical 5.6 mH inductance with ±10% tolerance, unshielded configuration, and through-hole radial mounting. The Bourns part's higher current rating (120 mA vs. 110 mA) and lower DC resistance (11.5Ohm max vs. 12.6Ohm) represent equivalent or improved electrical performance.

Q: What is the primary reason for substitution?

A: The ELC-09D562F is classified as obsolete. The RL895-562K-RC is an active product with confirmed inventory availability, ensuring production continuity and supply chain reliability.

Q: Are there physical dimension differences between these parts?

A: Minor dimensional variations exist. The ELC-09D562F measures 0.374" diameter × 0.350" height, while the RL895-562K-RC measures 0.307" diameter × 0.374" height. Both fit standard through-hole radial inductor footprints, though PCB layout verification is recommended for space-constrained designs.

Q: Do both parts meet the same regulatory compliance standards?

A: Yes. Both the ELC-09D562F and RL895-562K-RC are ROHS3 compliant. The Bourns part additionally carries REACH Unaffected status.

Q: What is the difference between the core materials?

A: The ELC-09D562F uses an unspecified core material, while the RL895-562K-RC uses a ferrite drum core. Both achieve the same 5.6 mH inductance specification with equivalent electrical performance in the specified application.