ELC-09D562DF Equivalent & Substitute Parts

Part Overview

The ELC-09D562DF is a 5.6 mH unshielded wirewound inductor manufactured by Panasonic Electronic Components, rated for 110 mA maximum current with 12.6Ohm DC resistance. This through-hole radial component is designed for general-purpose filtering and energy storage applications in electronic circuits.

The ELC-09D562DF is classified as obsolete. Identifying equivalent substitute parts is necessary to maintain design continuity, ensure supply chain availability, and support ongoing production or repair requirements for systems utilizing this inductor.

Substiute Parts

ELC-09D562DF

Panasonic Electronic ComponentsIn Stock: 970ELC-09D562DF Datasheet

Current PartRFQ

RL895-562K-RC

Bourns Inc.In Stock: 896RL895-562K-RC Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the ELC-09D562DF must satisfy the following electrical and mechanical criteria:

Electrical Parameters:

• Inductance value: 5.6 mH (±10% tolerance acceptable)
• Current rating: minimum 110 mA
• DC resistance: within acceptable operating range for the application
• Shielding: unshielded configuration

Mechanical Parameters:

• Mounting type: through-hole
• Package / case: radial, vertical cylinder configuration
• Physical dimensions: compatible with PCB footprint requirements

The RL895-562K-RC from Bourns Inc. meets these substitution criteria. It provides the same 5.6 mH inductance value with ±10% tolerance, supports 120 mA current rating (exceeding the 110 mA requirement), maintains unshielded construction, and uses identical through-hole radial mounting with vertical cylinder package geometry.

Parameter Comparison

Engineering Selection Recommendations

The RL895-562K-RC is a direct functional equivalent for the ELC-09D562DF based on the following factors:

Electrical Compatibility: Both components provide 5.6 mH inductance with ±10% tolerance. The RL895-562K-RC current rating of 120 mA exceeds the ELC-09D562DF requirement of 110 mA, providing operational margin. DC resistance values are comparable (11.5Ohm Max vs. 12.6Ohm), with the Bourns part offering slightly lower resistance.

Regulatory Compliance: Both parts are ROHS3 compliant, meeting environmental and hazardous substance restrictions applicable to electronic component manufacturing and use.

Product Availability: The RL895-562K-RC maintains active product status with current manufacturing support, whereas the ELC-09D562DF is obsolete. Selection of the Bourns substitute ensures long-term supply chain continuity and availability for production requirements.

Physical Compatibility: Both components use through-hole radial mounting with vertical cylinder package geometry. Dimensional differences (diameter and height) require PCB footprint verification to confirm mechanical fit within existing board layouts.

Frequently Asked Questions (FAQ)

Q: Can the RL895-562K-RC directly replace the ELC-09D562DF without circuit modification?

A: The RL895-562K-RC provides equivalent electrical performance for the specified inductance, current rating, and DC resistance parameters. PCB footprint compatibility must be confirmed, as the Bourns part has different physical dimensions (0.307" diameter vs. 0.374" diameter, and 0.374" height vs. 0.350" height). Mechanical fit verification is required before implementation.

Q: What are the key electrical parameters that determine substitution eligibility?

A: Inductance value (5.6 mH ±10%), current rating (minimum 110 mA), DC resistance range, and unshielded configuration are the primary electrical criteria. Both parts satisfy these requirements.

Q: Are there compliance or certification differences between these parts?

A: Both the ELC-09D562DF and RL895-562K-RC are ROHS3 compliant. The RL895-562K-RC additionally carries REACH Unaffected status. No compliance barriers exist for substitution.

Q: Why is the RL895-562K-RC recommended despite dimensional differences?

A: The Bourns part is the specified substitute for the obsolete Panasonic component, offering active product status and equivalent electrical performance. Dimensional differences are manageable through PCB layout adjustment and do not affect electrical function.

Q: What is the difference between the package descriptions "Radial, Vertical Cylinder" and "Radial, Vertical Cylinder (Open)"?

A: Both descriptions indicate radial through-hole mounting with vertical cylinder geometry. The "(Open)" designation for the Bourns part indicates an open-frame drum core construction, which is functionally equivalent for this application.