EL9111ILZ Equivalent & Substitute Parts

Part Overview

The EL9111ILZ is a 0/3 Receiver interface IC manufactured by Renesas Electronics Corporation in a 28-QFN (4x5) surface mount package. This component is classified as obsolete, making identification of active equivalent parts essential for ongoing production and design continuity. The EL9111ILZ operates at 5V supply voltage with an operating temperature range of -40°C to 85°C and is ROHS3 compliant with MSL 3 moisture sensitivity rating.

Substiute Parts

EL9111ILZ

Renesas Electronics CorporationIn Stock: 2496EL9111ILZ Datasheet

Current PartRFQ

ISL59910IRZ

Renesas Electronics CorporationIn Stock: 2213ISL59910IRZ Datasheet

DirectRFQ

ISL59910IRZ-T7

Renesas Electronics CorporationIn Stock: 6435ISL59910IRZ-T7 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for the EL9111ILZ is determined by strict equivalence across the following critical parameters:

• Number of Drivers/Receivers: 0/3
• Voltage - Supply: 5V
• Operating Temperature Range: -40°C ~ 85°C
• Package / Case: 28-VFQFN Exposed Pad
• Supplier Device Package: 28-QFN (4x5)
• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level: 3 (168 Hours)

The identified substitute parts ISL59910IRZ and ISL59910IRZ-T7 meet all electrical and mechanical parameters required for direct substitution. Both parts are manufactured by Renesas Electronics Corporation and maintain identical functional specifications. The primary distinction between these substitutes is packaging format: ISL59910IRZ is supplied in Tube packaging, while ISL59910IRZ-T7 is supplied in Cut Tape (CT) & Digi-Reel® format.

Parameter Comparison

Engineering Selection Recommendations

Both ISL59910IRZ and ISL59910IRZ-T7 are active production parts from Renesas Electronics Corporation and provide direct functional equivalence to the obsolete EL9111ILZ. Selection between these two substitute options should be based on procurement requirements and supply chain logistics:

ISL59910IRZ is supplied in Tube packaging with 2150 units currently in stock. ISL59910IRZ-T7 is supplied in Cut Tape (CT) & Digi-Reel® format with 6400 units currently in stock. Both parts maintain identical electrical specifications, compliance certifications (ROHS3, REACH Unaffected), and mechanical compatibility with the original EL9111ILZ footprint and thermal requirements.

Frequently Asked Questions (FAQ)

Q: Can ISL59910IRZ and ISL59910IRZ-T7 be used interchangeably with EL9111ILZ?

A: Yes. Both parts meet all critical electrical and mechanical parameters: identical receiver configuration (0/3), supply voltage (5V), operating temperature range (-40°C to 85°C), package type (28-VFQFN Exposed Pad), and compliance ratings (ROHS3, MSL 3). The difference between these two substitutes is packaging format only.

Q: What is the difference between ISL59910IRZ and ISL59910IRZ-T7?

A: Both parts are electrically and mechanically identical. ISL59910IRZ is supplied in Tube packaging, while ISL59910IRZ-T7 is supplied in Cut Tape (CT) & Digi-Reel® format. Selection depends on assembly process requirements and procurement volume.

Q: Why is the EL9111ILZ classified as obsolete?

A: The EL9111ILZ has been discontinued by Renesas Electronics Corporation. The ISL59910 series represents the active production equivalent, available as ISL59910IRZ and ISL59910IRZ-T7.

Q: Are there any thermal or environmental differences between these parts?

A: No. All three parts operate identically across the -40°C to 85°C temperature range and maintain the same MSL 3 (168 Hours) moisture sensitivity rating.

Q: Can I mix packaging formats in the same production run?

A: Both ISL59910IRZ (Tube) and ISL59910IRZ-T7 (Cut Tape & Digi-Reel®) are functionally identical and can be used in the same design. Packaging format selection should align with your assembly equipment and handling procedures.