EL5360IUZ Equivalent & Substitute Parts

Part Overview

The EL5360IUZ is a current feedback amplifier integrated circuit manufactured by Renesas Electronics Corporation, configured as a 3-circuit operational amplifier in a 16-QSOP surface mount package. This device is classified as obsolete, necessitating identification of equivalent substitute components for ongoing design support and production requirements. The EL5360IUZ operates across a supply voltage range of 5V to 10V with a slew rate of 1700V/µs and -3dB bandwidth of 200 MHz, serving applications requiring moderate-speed current feedback amplification.

Substiute Parts

EL5360IUZ

Renesas Electronics CorporationIn Stock: 956EL5360IUZ Datasheet

Current PartRFQ

OPA3691IDBQT

Texas InstrumentsIn Stock: 1403OPA3691IDBQT Datasheet

SimilarRFQ

OPA3695IDBQ

Texas InstrumentsIn Stock: 1185OPA3695IDBQ Datasheet

SimilarRFQ

OPA3695IDBQR

Texas InstrumentsIn Stock: 3127OPA3695IDBQR Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute components for the EL5360IUZ are selected based on strict electrical and mechanical compatibility criteria. All substitute parts must satisfy the following requirements:

Mandatory Compatibility Parameters:

• Amplifier Type: Current Feedback
• Number of Circuits: 3
• Package / Case: 16-SSOP (0.154", 3.90mm Width)
• Mounting Type: Surface Mount
• Operating Temperature Range: -40°C to 85°C (minimum)
• Voltage - Supply Span (Min): 5V or lower
• Voltage - Supply Span (Max): 10V or higher

Substitution Logic: Substitute parts are grouped into two categories based on performance characteristics and product status. The OPA3691IDBQT represents an active product with enhanced performance specifications while maintaining backward compatibility with the original supply voltage requirements. The OPA3695IDBQ and OPA3695IDBQR variants offer superior bandwidth and slew rate performance, with expanded supply voltage capability, suitable for applications requiring higher-speed operation.

All substitute parts comply with ROHS3 and maintain identical moisture sensitivity levels (MSL 2, 1 Year) and package dimensions as the original EL5360IUZ.

Parameter Comparison

Engineering Selection Recommendations

OPA3691IDBQT Selection: The OPA3691IDBQT is recommended as the primary substitute for the EL5360IUZ in applications requiring direct performance enhancement with minimal design modification. This device maintains active product status from Texas Instruments, ensuring long-term availability and supply chain stability. The OPA3691IDBQT operates within the original 5V to 12V supply range, with improved slew rate (2100V/µs) and bandwidth (280 MHz) characteristics. The device is supplied in Tape & Reel packaging and maintains full ROHS3 compliance and MSL 2 moisture sensitivity rating.

OPA3695IDBQR Selection: The OPA3695IDBQR is recommended for applications requiring maximum performance specifications and extended supply voltage capability (3.5V to 12V). This device offers the highest slew rate (2400V/µs) and bandwidth (1 GHz) among available substitutes, with active product status ensuring continued availability. The OPA3695IDBQR is suitable for high-speed signal processing applications and maintains full regulatory compliance.

OPA3695IDBQ Selection: The OPA3695IDBQ provides equivalent performance to the OPA3695IDBQR with Last Time Buy product status. This device is suitable for applications where performance specifications align with the OPA3695 series requirements. Inventory availability is confirmed at 1114 pieces.

All substitute parts comply with ROHS3 regulations, maintain identical operating temperature ranges (-40°C to 85°C), and are packaged in 16-SSOP surface mount configuration matching the original EL5360IUZ specifications.

Frequently Asked Questions (FAQ)

Q: Can the OPA3691IDBQT directly replace the EL5360IUZ without circuit modifications?

A: The OPA3691IDBQT is mechanically and electrically compatible with the EL5360IUZ. Both devices feature identical 16-SSOP package dimensions, three-circuit configuration, and surface mount mounting type. The supply voltage range of the OPA3691IDBQT (5V to 12V) encompasses the original EL5360IUZ range (5V to 10V). Pin-for-pin compatibility and functional equivalence are maintained. Circuit validation is required to confirm performance adequacy for specific application requirements.

Q: What are the key differences between the OPA3691IDBQT and OPA3695 variants?

A: The OPA3691IDBQT provides moderate performance enhancement with -3dB bandwidth of 280 MHz and slew rate of 2100V/µs. The OPA3695IDBQ and OPA3695IDBQR variants offer significantly higher performance with -3dB bandwidth of 1 GHz and slew rate of 2400V/µs. The OPA3695 series also supports lower minimum supply voltage (3.5V versus 5V). Selection depends on application bandwidth and slew rate requirements.

Q: Are all substitute parts RoHS compliant?

A: All substitute parts listed (OPA3691IDBQT, OPA3695IDBQ, OPA3695IDBQR) are ROHS3 compliant, matching the compliance status of the original EL5360IUZ. All devices maintain MSL 2 (1 Year) moisture sensitivity level.

Q: What is the significance of the OPA3695IDBQ Last Time Buy status?

A: Last Time Buy status indicates that Texas Instruments has announced end-of-life for this specific part number. Existing inventory is available for purchase, but no future production is planned. The OPA3695IDBQR (Active status) provides equivalent specifications with assured long-term availability.

Q: Do the substitute parts require different PCB layout considerations?

A: All substitute parts utilize identical 16-SSOP package dimensions (0.154" width, 3.90mm). PCB footprints and layout requirements remain unchanged from the original EL5360IUZ design. No modifications to PCB artwork or assembly procedures are necessary.

Q: What is the supply current difference between the EL5360IUZ and substitute parts?

A: The EL5360IUZ operates at 750µA total supply current (x3 channels). The OPA3691IDBQT requires 15.3mA, while the OPA3695 variants require 12.9mA. Applications with strict power consumption constraints must account for this increased current draw during design validation.

Q: Can the OPA3695 variants operate at the original 5V to 10V supply range?

A: The OPA3695IDBQ and OPA3695IDBQR support supply voltage range of 3.5V to 12V, which encompasses the original 5V to 10V range. These devices are fully compatible with existing power supply designs.