EL5220CY-T13 Equivalent & Substitute Parts

Part Overview

The EL5220CY-T13 is a voltage feedback amplifier integrated circuit manufactured by Renesas Electronics Corporation, configured as a dual-channel (2 circuit) rail-to-rail operational amplifier in an 8-MSOP surface mount package. This device is classified as obsolete, indicating discontinuation from active production. The EL5220CY-T13 operates across a supply voltage range of 4.5 V to 16.5 V with an operating temperature range of -40°C to 125°C, making it suitable for general-purpose analog signal conditioning applications.

Due to the obsolete product status of the EL5220CY-T13, identification of equivalent and substitute parts is necessary for design continuity, component procurement, and system reliability. Substitute parts are selected based on electrical performance parameters, mechanical compatibility, and functional equivalence within the voltage feedback amplifier category.

Substiute Parts

EL5220CY-T13

Renesas Electronics CorporationIn Stock: 25258EL5220CY-T13 Datasheet

Current PartRFQ

EL5220CYZ-T13

Renesas Electronics CorporationIn Stock: 10432EL5220CYZ-T13 Datasheet

DirectRFQ

EL5220CYZ-T7

Renesas Electronics CorporationIn Stock: 37475EL5220CYZ-T7 Datasheet

Parametric EquivalentRFQ

LT6004HMS8#PBF

Analog Devices Inc.In Stock: 1516LT6004HMS8#PBF Datasheet

SimilarRFQ

LT6004HMS8#TRPBF

Analog Devices Inc.In Stock: 874LT6004HMS8#TRPBF Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the EL5220CY-T13 are classified into two categories based on electrical and mechanical compatibility:

Direct Substitutes (Parametric Equivalents): Parts that maintain identical electrical specifications across all critical parameters including slew rate, gain bandwidth product, input bias current, input offset voltage, supply current, output current, and supply voltage range. These parts are functionally interchangeable with the main part and differ only in product status, packaging format, or compliance certifications.

Similar Substitutes (Functional Alternatives): Parts that share the same package format (8-MSOP), mounting type (surface mount), number of circuits (2), and output type (rail-to-rail), but exhibit different electrical performance characteristics. These parts operate within the same supply voltage range and temperature range but have different slew rates, bandwidth products, and input characteristics.

The substitution logic is based on the following key parameters:

• Amplifier type classification (voltage feedback vs. general purpose)
• Number of circuits (dual-channel configuration)
• Output type (rail-to-rail capability)
• Package format and pin count (8-MSOP)
• Supply voltage compatibility (4.5 V to 16.5 V minimum overlap)
• Operating temperature range (-40°C to 125°C)
• Mounting type (surface mount)

Parameter Comparison

Engineering Selection Recommendations

Primary Substitutes: EL5220CYZ-T13 and EL5220CYZ-T7

The EL5220CYZ-T13 and EL5220CYZ-T7 are direct parametric equivalents to the EL5220CY-T13, maintaining identical electrical specifications across all measured parameters. Both parts are manufactured by Renesas Electronics Corporation and are classified as active products, ensuring long-term availability and supply chain continuity. The EL5220CYZ-T13 is supplied in tube packaging, while the EL5220CYZ-T7 is supplied in tape and reel format. Both parts are ROHS3 compliant, addressing regulatory requirements for new designs. The EL5220CYZ-T13 and EL5220CYZ-T7 are recommended as the primary substitutes for the obsolete EL5220CY-T13.

Secondary Substitutes: LT6004HMS8#PBF and LT6004HMS8#TRPBF

The LT6004HMS8#PBF and LT6004HMS8#TRPBF are manufactured by Analog Devices Inc. and share the same 8-MSOP package format, dual-channel configuration, rail-to-rail output type, and operating temperature range as the EL5220CY-T13. These parts are classified as general-purpose amplifiers rather than voltage feedback amplifiers. The LT6004 series exhibits significantly lower slew rate (0.0055 V/µs versus 10 V/µs), lower gain bandwidth product (3 kHz versus 8 MHz), higher input bias current (12 nA versus 2 nA), lower input offset voltage (100 µV versus 2 mV), and higher supply current (1.1 mA per channel versus 500 µA per channel). The LT6004HMS8#PBF is supplied in tube packaging, while the LT6004HMS8#TRPBF is supplied in tape and reel format. Both parts are ROHS3 compliant and have unlimited moisture sensitivity level. These parts are suitable for applications where lower bandwidth and slower slew rate are acceptable, and where the lower supply voltage minimum (1.6 V) provides additional design flexibility.

Frequently Asked Questions (FAQ)

Q: Can the EL5220CYZ-T13 be used as a direct replacement for the EL5220CY-T13?

A: Yes. The EL5220CYZ-T13 is a direct parametric equivalent with identical electrical specifications. The primary differences are product status (active versus obsolete) and RoHS compliance (ROHS3 compliant versus non-compliant). Both parts are supplied in tube packaging and use the same 8-MSOP package format.

Q: What is the difference between EL5220CYZ-T13 and EL5220CYZ-T7?

A: The EL5220CYZ-T13 and EL5220CYZ-T7 are electrically identical. The primary difference is packaging format: EL5220CYZ-T13 is supplied in tube packaging, while EL5220CYZ-T7 is supplied in tape and reel format. Both parts have identical electrical performance and are ROHS3 compliant.

Q: Can the LT6004HMS8#PBF replace the EL5220CY-T13 in all applications?

A: The LT6004HMS8#PBF shares the same package format and dual-channel configuration but has significantly different electrical characteristics. The LT6004 has lower slew rate (0.0055 V/µs versus 10 V/µs) and lower gain bandwidth product (3 kHz versus 8 MHz). Substitution is only appropriate for applications where these lower performance specifications are acceptable.

Q: What are the key electrical differences between the EL5220 series and the LT6004 series?

A: The EL5220 is a voltage feedback amplifier with 10 V/µs slew rate and 8 MHz gain bandwidth product. The LT6004 is a general-purpose amplifier with 0.0055 V/µs slew rate and 3 kHz gain bandwidth product. The EL5220 has lower input bias current (2 nA versus 12 nA) and lower supply current (500 µA per channel versus 1.1 mA per channel). The LT6004 has lower input offset voltage (100 µV versus 2 mV) and lower minimum supply voltage (1.6 V versus 4.5 V).

Q: Are all substitute parts RoHS compliant?

A: The EL5220CY-T13 is RoHS non-compliant. The EL5220CYZ-T13, EL5220CYZ-T7, LT6004HMS8#PBF, and LT6004HMS8#TRPBF are all ROHS3 compliant. For new designs subject to RoHS requirements, the active substitute parts are required.

Q: What is the difference between tube and tape & reel packaging?

A: Tube packaging supplies components in plastic tubes suitable for manual handling and lower-volume applications. Tape and reel packaging supplies components on continuous tape wound on reels, suitable for automated assembly processes and higher-volume production. Electrical performance is identical between packaging formats.

Q: Can the EL5220CYZ-T7 be used in designs originally specified for the EL5220CY-T13?

A: Yes. The EL5220CYZ-T7 is a direct parametric equivalent with identical electrical specifications and the same 8-MSOP package format. The only difference is the tape and reel packaging format, which does not affect electrical performance or pin compatibility.

Q: What is the moisture sensitivity level difference between the parts?

A: The EL5220CY-T13 has MSL 1 (unlimited shelf life without moisture control). The EL5220CYZ-T13 and EL5220CYZ-T7 have MSL 2 (1 year shelf life with moisture control). The LT6004HMS8#PBF and LT6004HMS8#TRPBF have MSL 1 (unlimited shelf life). MSL 2 parts require controlled storage conditions to prevent moisture absorption.

Q: Are the supply voltage ranges compatible across all substitute parts?

A: The EL5220CY-T13, EL5220CYZ-T13, and EL5220CYZ-T7 operate from 4.5 V to 16.5 V. The LT6004HMS8#PBF and LT6004HMS8#TRPBF operate from 1.6 V to 16 V. The LT6004 series has a lower minimum supply voltage but slightly lower maximum supply voltage. For applications requiring 4.5 V minimum supply, all parts are compatible. For applications requiring lower supply voltage, only the LT6004 series is suitable.