Request Quote
(Ships tomorrow)
EL5160IS Equivalent & Substitute Parts
Part Overview
The EL5160IS is a current feedback amplifier manufactured by Renesas Electronics Corporation, housed in an 8-SOIC surface mount package. This device is classified as obsolete, which necessitates identification of functionally equivalent alternatives for ongoing design support and component procurement. The EL5160IS delivers a slew rate of 1700V/µs with a -3dB bandwidth of 200 MHz, making it suitable for high-speed signal conditioning applications. Due to its obsolete status, equivalent parts from active product lines are required to maintain design continuity and ensure long-term component availability.
Substiute Parts
Key Parameters
| Parameter | Value | Unit |
|---|---|---|
| Amplifier Type | Current Feedback | — |
| Number of Circuits | 1 | — |
| Slew Rate | 1700 | V/µs |
| -3dB Bandwidth | 200 | MHz |
| Current - Input Bias | 5 | µA |
| Voltage - Input Offset | 1.6 | mV |
| Current - Supply | 750 | µA |
| Current - Output / Channel | 140 | mA |
| Voltage - Supply Span (Min) | 5 | V |
| Voltage - Supply Span (Max) | 10 | V |
| Operating Temperature | -40 to 85 | °C |
| Package / Case | 8-SOIC (0.154", 3.90mm Width) | — |
| Mounting Type | Surface Mount | — |
| RoHS Status | RoHS non-compliant | — |
Substitute Part Grouping Explanation
Substitution of the EL5160IS is determined by the following critical parameters: amplifier type (current feedback), package format (8-SOIC surface mount), operating temperature range (-40°C to 85°C), and electrical performance specifications including slew rate, bandwidth, and supply voltage compatibility.
The substitute parts are grouped into two categories:
Direct Packaging Equivalent: EL5160ISZ is an identical functional device from Renesas Electronics Corporation, differentiated only by packaging format (tube versus tape & reel) and improved compliance status (RoHS3 compliant, MSL 1 versus MSL 2).
Functional Equivalents from Texas Instruments: The OPA683ID, OPA683IDR, OPA684ID, OPA684IDR, OPA691ID, OPA691IDR, and OPA695ID/OPA695IDR devices are current feedback amplifiers in 8-SOIC packages with compatible supply voltage ranges (5V to 12V) and operating temperature specifications. These parts maintain the core functional category while offering variations in performance metrics such as slew rate, bandwidth, and supply current.
The OPA693ID is classified as a video amplifier buffer and operates outside the current feedback amplifier category; substitution requires application-specific validation.
Parameter Comparison
| Part Number | Manufacturer | Product Status | Slew Rate (V/µs) | -3dB Bandwidth (MHz) | Input Bias Current (µA) | Input Offset Voltage (mV) | Supply Current (mA) | Output Current (mA) | Supply Voltage Min (V) | Supply Voltage Max (V) | Package | RoHS Status |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| EL5160IS | Renesas | Obsolete | 1700 | 200 | 5 | 1.6 | 0.75 | 140 | 5 | 10 | 8-SOIC | Non-compliant |
| EL5160ISZ | Renesas | Obsolete | 1700 | 200 | 5 | 1.6 | 0.75 | 140 | 5 | 10 | 8-SOIC | RoHS3 Compliant |
| OPA683ID | Texas Instruments | Active | 540 | 200 | 3 | 1.5 | 0.94 | 150 | 5 | 12 | 8-SOIC | RoHS3 Compliant |
| OPA683IDR | Texas Instruments | Active | 540 | 200 | 3 | 1.5 | 0.94 | 150 | 5 | 12 | 8-SOIC | RoHS3 Compliant |
| OPA684ID | Texas Instruments | Active | 820 | 210 | 5 | 1.5 | 1.7 | 160 | 5 | 12 | 8-SOIC | RoHS3 Compliant |
| OPA684IDR | Texas Instruments | Active | 820 | 210 | 5 | 1.5 | 1.7 | 160 | 5 | 12 | 8-SOIC | RoHS3 Compliant |
| OPA691ID | Texas Instruments | Active | 2100 | 280 | 15 | 0.5 | 5.1 | 190 | 5 | 12 | 8-SOIC | RoHS3 Compliant |
| OPA691IDR | Texas Instruments | Active | 2100 | 280 | 15 | 0.5 | 5.1 | 190 | 5 | 12 | 8-SOIC | RoHS3 Compliant |
| OPA695ID | Texas Instruments | Last Time Buy | 4300 | 1700 | 20 | 0.3 | 12.9 | 120 | 5 | 12 | 8-SOIC | RoHS3 Compliant |
| OPA695IDR | Texas Instruments | Active | 4300 | 1700 | 20 | 0.3 | 12.9 | 120 | 5 | 12 | 8-SOIC | RoHS3 Compliant |
Engineering Selection Recommendations
For Direct Replacement with Identical Performance:
EL5160ISZ is the optimal substitute when electrical performance equivalence is required. This device maintains all electrical specifications of the EL5160IS while offering improved compliance status (RoHS3 compliant) and superior moisture sensitivity rating (MSL 1 versus MSL 2). Both devices are classified as obsolete; however, EL5160ISZ provides better long-term environmental compliance for new designs.
For Active Product Line Substitution:
When sourcing from active product lines is necessary, the OPA683ID and OPA683IDR (Texas Instruments) provide the closest electrical match to the EL5160IS within the -3dB bandwidth specification (200 MHz). These devices are RoHS3 compliant and active products. The trade-off is a reduced slew rate (540V/µs versus 1700V/µs) and slightly increased supply current (0.94mA versus 0.75mA).
The OPA684ID and OPA684IDR offer improved performance with higher slew rate (820V/µs) and bandwidth (210 MHz) while maintaining active product status and RoHS3 compliance. Supply current increases to 1.7mA.
The OPA691ID and OPA691IDR deliver superior performance specifications (2100V/µs slew rate, 280 MHz bandwidth) with active product status and RoHS3 compliance. These are suitable for applications requiring higher performance margins. Supply current is 5.1mA.
The OPA695IDR is an active product with the highest performance envelope (4300V/µs slew rate, 1.7 GHz bandwidth) but with significantly elevated supply current (12.9mA). This device is suitable only for applications where maximum performance is required.
All Texas Instruments substitutes support extended supply voltage range (5V to 12V) compared to the EL5160IS (5V to 10V), providing additional design flexibility.
Frequently Asked Questions (FAQ)
Q: Can EL5160ISZ be used as a direct replacement for EL5160IS?
A: Yes. EL5160ISZ is electrically identical to EL5160IS with all specifications matching. The primary differences are packaging format (tube versus tape & reel) and compliance status (RoHS3 compliant versus non-compliant). Both devices are obsolete.
Q: What is the primary difference between OPA683IDR and OPA683ID?
A: OPA683IDR is supplied in Tape & Reel (TR) packaging, while OPA683ID is supplied in Tube packaging. Electrical specifications are identical. Selection depends on assembly process requirements and volume.
Q: Can OPA695IDR replace EL5160IS in all applications?
A: OPA695IDR is electrically compatible in terms of package, supply voltage range, and operating temperature. However, the significantly higher slew rate (4300V/µs versus 1700V/µs), bandwidth (1.7 GHz versus 200 MHz), and supply current (12.9mA versus 0.75mA) make it suitable only for applications where these performance characteristics do not create design complications such as excessive power dissipation or signal integrity issues.
Q: What is the significance of the RoHS3 compliance difference?
A: RoHS3 compliance indicates conformance to current environmental regulations restricting hazardous substances. For new designs or applications subject to regulatory requirements, RoHS3 compliant parts (such as EL5160ISZ or Texas Instruments OPA series) are required. The original EL5160IS is non-compliant and suitable only for legacy system maintenance.
Q: Are all substitute parts available in 8-SOIC packaging?
A: Yes. All substitute parts listed are housed in 8-SOIC (0.154", 3.90mm Width) surface mount packages, ensuring mechanical and electrical compatibility with existing PCB layouts designed for the EL5160IS.
Q: What is the impact of supply voltage range differences?
A: The EL5160IS operates from 5V to 10V, while Texas Instruments substitutes operate from 5V to 12V. This extended range provides additional design flexibility for systems with variable supply voltages. Designs operating within the 5V to 10V window are fully compatible with all substitutes.
Q: Which substitute offers the best balance of performance and power consumption?
A: The OPA684ID and OPA684IDR provide moderate performance improvement (820V/µs slew rate, 210 MHz bandwidth) with manageable supply current increase (1.7mA). These devices are suitable for applications requiring performance enhancement beyond the EL5160IS without excessive power dissipation.
Q: Is OPA693ID a suitable substitute for EL5160IS?
A: OPA693ID is classified as a video amplifier buffer rather than a current feedback amplifier. While it shares the 8-SOIC package and surface mount format, its functional category differs from the EL5160IS. Substitution requires application-specific validation to confirm functional compatibility.
Alternative Parts
SJ6012L2TP
Littelfuse Inc.
6 Alternative Parts
JMK107BBJ476MA-RE
Taiyo Yuden
10 Alternative Parts
GMK107BBJ475MA-T
Taiyo Yuden
5 Alternative Parts
SJ6020N2ARP
Littelfuse Inc.
3 Alternative Parts
SJ6025R2ATP
Littelfuse Inc.
4 Alternative Parts
2474-05L
API Delevan Inc.
1 Alternative Parts
4590R-684K
API Delevan Inc.
1 Alternative Parts
CM6560R-334
API Delevan Inc.
1 Alternative Parts
CM6460-104
API Delevan Inc.
1 Alternative Parts
5526-12
API Delevan Inc.
1 Alternative Parts