EL5152IS-T13 Equivalent & Substitute Parts

Part Overview

The EL5152IS-T13 is a voltage feedback amplifier manufactured by Renesas Electronics Corporation, housed in an 8-SOIC surface mount package. This linear amplifier integrates one circuit and is designed for applications requiring moderate bandwidth and slew rate performance within a 5V to 12V supply range.

The EL5152IS-T13 is classified as obsolete. Locating equivalent or substitute components is necessary to support ongoing production requirements, maintenance operations, and design continuity for systems currently utilizing this amplifier.

Substiute Parts

EL5152IS-T13

Renesas Electronics CorporationIn Stock: 980EL5152IS-T13 Datasheet

Current PartRFQ

OPA820IDG4

Texas InstrumentsIn Stock: 951OPA820IDG4 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the EL5152IS-T13 is determined by the following critical parameters:

Functional Compatibility Parameters:

• Amplifier Type: Voltage Feedback
• Number of Circuits: 1
• Package / Case: 8-SOIC (0.154", 3.90mm Width)
• Mounting Type: Surface Mount
• Operating Temperature Range: -40°C to 85°C
• Voltage - Supply Span: 5V to 12V

Performance Parameters:

• Slew Rate: 180 V/µs (minimum acceptable)
• Gain Bandwidth Product: 165 MHz (minimum acceptable)
• -3dB Bandwidth: 270 MHz (minimum acceptable)
• Current - Input Bias: 120 nA (maximum acceptable)
• Voltage - Input Offset: 500 µV (maximum acceptable)
• Current - Supply: 3 mA (maximum acceptable)

Substitute parts must maintain identical package geometry, mounting technology, and supply voltage specifications. Performance parameters in substitute parts may exceed the original specifications without compromising circuit compatibility, provided all other electrical and mechanical requirements are satisfied.

Parameter Comparison

Engineering Selection Recommendations

OPA820IDG4 as Substitute for EL5152IS-T13:

The OPA820IDG4 manufactured by Texas Instruments satisfies all mandatory substitution criteria for the EL5152IS-T13. Both devices share identical package geometry (8-SOIC), mounting technology (surface mount), and supply voltage specifications (5V to 12V). Both operate across the same temperature range (-40°C to 85°C).

The OPA820IDG4 exceeds the performance specifications of the EL5152IS-T13 across multiple parameters: slew rate (240 V/µs versus 180 V/µs), gain bandwidth product (280 MHz versus 165 MHz), and -3dB bandwidth (800 MHz versus 270 MHz). The OPA820IDG4 also provides superior input offset voltage (200 µV versus 500 µV).

The OPA820IDG4 exhibits higher input bias current (9 µA versus 120 nA) and increased supply current (5.6 mA versus 3 mA). These differences require circuit-level evaluation to confirm compatibility with existing power budgets and biasing networks.

The OPA820IDG4 holds ROHS3 compliance status, whereas the EL5152IS-T13 is RoHS non-compliant. The OPA820IDG4 carries MSL 2 (1 Year) moisture sensitivity classification compared to MSL 1 (Unlimited) for the original part, requiring appropriate handling and storage protocols.

Both parts are subject to the same ECCN (EAR99) and HTSUS (8542.33.0001) classifications.

Frequently Asked Questions (FAQ)

Q: Can the OPA820IDG4 be used as a direct replacement for the EL5152IS-T13 in existing PCB designs?

A: The OPA820IDG4 shares identical package geometry and pinout with the EL5152IS-T13, enabling direct physical substitution on existing printed circuit boards. However, circuit-level compatibility must be confirmed, particularly regarding input bias current and supply current specifications, which differ between the two devices.

Q: What are the primary electrical differences between the EL5152IS-T13 and OPA820IDG4?

A: The OPA820IDG4 provides higher performance across bandwidth and slew rate parameters. The OPA820IDG4 exhibits significantly higher input bias current (9 µA versus 120 nA) and increased supply current consumption (5.6 mA versus 3 mA). The OPA820IDG4 offers lower input offset voltage (200 µV versus 500 µV).

Q: Are there packaging or handling differences between these two amplifiers?

A: Both devices use 8-SOIC surface mount packages with identical physical dimensions. The OPA820IDG4 carries MSL 2 (1 Year) moisture sensitivity classification, requiring controlled storage and handling within one year of package opening. The EL5152IS-T13 carries MSL 1 (Unlimited) classification, permitting indefinite shelf storage without moisture control.

Q: Does the OPA820IDG4 meet RoHS compliance requirements?

A: The OPA820IDG4 is ROHS3 compliant. The EL5152IS-T13 is RoHS non-compliant. Selection between these devices depends on specific regulatory and procurement requirements for the end application.

Q: What is the current availability status of these amplifiers?

A: The EL5152IS-T13 is classified as obsolete. The OPA820IDG4 is classified as discontinued at DiGi Electronics. Both devices present supply chain constraints for new procurement.

Q: Are the supply voltage requirements identical between these two devices?

A: Both the EL5152IS-T13 and OPA820IDG4 operate across identical supply voltage ranges: 5V minimum to 12V maximum. Existing power supply designs require no modification for voltage compatibility.

Q: How do the operating temperature ranges compare?

A: Both devices operate across the identical temperature range of -40°C to 85°C. No thermal design modifications are required for temperature compatibility.