EGA.0B.306.CLL Equivalent & Substitute Parts

Part Overview

The EGA.0B.306.CLL is a 6-position circular connector receptacle manufactured by LEMO, featuring female sockets with solder cup termination. This connector is designed for panel mount applications with bulkhead rear side nut fastening and push-pull locking mechanism. The part is actively produced and maintains full RoHS3 compliance with unlimited moisture sensitivity rating. Substitute parts are identified when equivalent electrical and mechanical parameters align with the original specification, enabling component interchangeability in applications where form factor and performance requirements are met.

Substiute Parts

EGA.0B.306.CLL

LEMOIn Stock: 918EGA.0B.306.CLL Datasheet

Current PartRFQ

G10LAC-P06LCC0-0000

ODUIn Stock: 914G10LAC-P06LCC0-0000 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

The substitute part G10LAC-P06LCC0-0000 (ODU MINI-SNAP® L series) qualifies as an equivalent based on the following alignment of critical parameters:

Matching Parameters:

• Connector type: Receptacle, Female Sockets
• Number of positions: 6
• Termination method: Solder Cup
• Mounting configuration: Panel Mount with Bulkhead - Rear Side Nut
• Fastening mechanism: Push-Pull
• Shielding: Shielded
• Contact finish: Gold plated
• Ingress protection: IP50 - Dust Protected
• Insert material: Polyetheretherketone (PEEK)
• RoHS3 compliance: Yes
• Moisture sensitivity level: 1 (Unlimited)

Differing Parameters:

• Current rating: EGA.0B.306.CLL rated 2.5A; G10LAC-P06LCC0-0000 rated 4A
• Operating temperature: EGA.0B.306.CLL rated -55°C ~ 250°C; G10LAC-P06LCC0-0000 rated -40°C ~ 120°C
• Shell finish: EGA.0B.306.CLL has Chrome; G10LAC-P06LCC0-0000 has Chrome over Nickel
• Contact material: EGA.0B.306.CLL uses Bronze; G10LAC-P06LCC0-0000 uses Brass

Parameter Comparison

Engineering Selection Recommendations

Both the EGA.0B.306.CLL and G10LAC-P06LCC0-0000 maintain active product status and full RoHS3 compliance with REACH unaffected designation. Selection between these parts depends on application-specific requirements:

The EGA.0B.306.CLL supports extended operating temperature range (-55°C to 250°C) and is suitable for high-temperature applications. The G10LAC-P06LCC0-0000 operates within -40°C to 120°C and provides higher current capacity (4A versus 2.5A), making it appropriate for higher-power signal transmission in industrial, medical, military, and testing equipment applications.

Both connectors provide equivalent mechanical interchangeability through identical mounting configurations, fastening mechanisms, and solder cup termination. The 6-position female receptacle configuration with push-pull locking and IP50 ingress protection ensures consistent performance in shielded applications requiring dust protection.

Frequently Asked Questions (FAQ)

Q: Can G10LAC-P06LCC0-0000 replace EGA.0B.306.CLL in all applications?

A: Mechanical and electrical compatibility exists for applications operating within -40°C to 120°C temperature range and requiring up to 4A current capacity. Applications requiring the extended temperature range of -55°C to 250°C require the EGA.0B.306.CLL.

Q: What are the key compatibility factors for these connectors?

A: Both connectors share identical 6-position female receptacle configuration, solder cup termination, panel mount bulkhead fastening, push-pull locking mechanism, shielded design, and IP50 ingress protection rating. These parameters ensure mechanical and functional interchangeability within specified operating conditions.

Q: Are there differences in contact material between these parts?

A: Yes. The EGA.0B.306.CLL uses bronze contacts while the G10LAC-P06LCC0-0000 uses brass contacts. Both materials are gold-plated for mating surfaces and provide equivalent electrical performance in standard applications.

Q: Do both parts meet the same compliance standards?

A: Both connectors are RoHS3 compliant, REACH unaffected, and carry MSL 1 (Unlimited) moisture sensitivity rating. Both use identical PEEK insert material and support equivalent environmental protection levels.

Q: What is the primary limitation when substituting G10LAC-P06LCC0-0000 for EGA.0B.306.CLL?

A: The operating temperature range is the primary constraint. The ODU part operates to 120°C maximum, while the LEMO part extends to 250°C. Applications requiring sustained high-temperature operation must use the EGA.0B.306.CLL.