EG 1AV Equivalent & Substitute Parts Reference

Part Overview

The Sanken Electric USA Inc. EG 1AV is a through-hole, axial diode categorized under Diodes, Rectifiers. It features fast recovery capabilities and is suitable for general-purpose rectification at 600 V DC reverse voltage and 600 mA average rectified current. The product is active and RoHS compliant, available in tape & reel packaging. Identifying equivalent and substitute models is essential to support continuous manufacturing, mitigate supply risks, and ensure design compatibility within this product category.

Substiute Parts

EG 1AV

Sanken Electric USA Inc.In Stock: 939EG 1AV Datasheet

Current PartRFQ

EG 1AV1

Sanken Electric USA Inc.In Stock: 933EG 1AV1 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution logic within the Diodes, Rectifiers category is strictly determined by equivalence in electrical and mechanical parameters. Only models with identical values for DC reverse voltage, average rectified current, forward voltage at rated current, reverse recovery time, reverse leakage current, mounting type, package, and compliance status qualify as substitutes. Packaging format may differ if all other parameters are matched.

Key substitution parameters:

• Voltage - DC Reverse (Vr) (Max)
• Current - Average Rectified (Io)
• Voltage - Forward (Vf) (Max) @ If
• Reverse Recovery Time (trr)
• Current - Reverse Leakage @ Vr
• Mounting Type
• Package / Case
• Operating Temperature - Junction
• RoHS Status
• MSL
• Product Status

Parameter Comparison

Engineering Selection Recommendations

Both the EG 1AV and its substitute EG 1AV1 are active, RoHS compliant, and carry a Moisture Sensitivity Level of 1 (Unlimited), with matching electrical and mechanical parameters. Selection between these parts should be based on packaging preference, as both fulfill compliance and certification requirements for use in regulated and unrestricted electronic designs.

Frequently Asked Questions (FAQ)

Q1: What parameters must be identical for a diode to be considered an equivalent substitute for the EG 1AV?
A1: Equivalent substitution requires identical values in voltage rating, current capacity, forward voltage, reverse recovery time, reverse leakage current, operating temperature range, compliance status, mounting type, and package case.

Q2: Does packaging type affect the substitutability of EG 1AV and EG 1AV1?
A2: Packaging type (Tape & Reel vs. Cut Tape) does not affect electrical or mechanical substitutability, but may influence handling and automated assembly processes.

Q3: Are RoHS and MSL compliance necessary considerations for substitution?
A3: Yes, matching RoHS compliance and MSL level ensures appropriate selection for environmental regulations and reliability in manufacturing environments.

Q4: Is the substitute part EG 1AV1 fully interchangeable with EG 1AV in terms of performance?
A4: All relevant performance, mechanical, and compliance parameters provided for EG 1AV1 are identical to EG 1AV, supporting complete interchangeability within the defined criteria.

Q5: Can the EG 1AV1 be used in the same through-hole, axial mount applications as the EG 1AV?
A5: Yes, both models share the same through-hole, axial mounting configuration as specified.