EEV-FK2A151M Equivalent & Substitute Parts

Part Overview

The EEV-FK2A151M is a 150 µF, 100 V aluminum electrolytic capacitor in surface mount radial can package manufactured by Panasonic Electronic Components. This component is rated for automotive applications with AEC-Q200 compliance and designed for 5000 hours of operation at 105°C. The part is currently active in production with full RoHS3 compliance and unlimited moisture sensitivity level rating.

Substitute parts are identified when equivalent electrical performance and mechanical compatibility are maintained across the specified parameter set, enabling design flexibility and supply chain continuity.

Substiute Parts

EEV-FK2A151M

Panasonic Electronic ComponentsIn Stock: 911EEV-FK2A151M Datasheet

Current PartRFQ

EEE-FK2A151AM

Panasonic Electronic ComponentsIn Stock: 1265EEE-FK2A151AM Datasheet

UpgradeRFQ

EEV-FK2A151V

Panasonic Electronic ComponentsIn Stock: 830EEV-FK2A151V Datasheet

Parametric EquivalentRFQ

AFK157M2AP44T-F

Cornell Dubilier Electronics (CDE)In Stock: 764AFK157M2AP44T-F Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the EEV-FK2A151M are classified based on electrical parameter equivalence and mechanical compatibility:

Upgrade Substitute (EEE-FK2A151AM): Maintains identical electrical specifications (150 µF, 100 V, ±20%, 5000 Hrs @ 105°C, 170 mOhms impedance, identical ripple current ratings) with packaging in Tape & Reel format. Adds high temperature reflow capability. Surface mount land size remains 17.00mm x 17.00mm.

Parametric Equivalent (EEV-FK2A151V): Identical electrical parameters and mechanical dimensions to the main part. Classified as anti-vibration series within the FK product line. Packaging in Tape & Reel format. Maintains all electrical and thermal specifications.

Similar Substitute (AFK157M2AP44T-F): Cornell Dubilier Electronics alternative with matching electrical specifications (150 µF, 100 V, ±20%, 5000 Hrs @ 105°C, 170 mOhms impedance, identical ripple current ratings). Case diameter and height identical. Surface mount land width differs at 19.00mm versus 17.00mm standard width, requiring PCB layout verification.

Parameter Comparison

Engineering Selection Recommendations

All listed substitute parts maintain active product status with full AEC-Q200 automotive qualification and RoHS3 compliance, ensuring regulatory and quality standards alignment with the primary part.

EEE-FK2A151AM is suitable for applications requiring Tape & Reel packaging with high temperature reflow processing capability. Electrical and mechanical specifications are identical to the main part.

EEV-FK2A151V provides direct substitution with anti-vibration series designation. All electrical parameters, thermal ratings, and mechanical dimensions match the primary part exactly. Tape & Reel packaging format applies.

AFK157M2AP44T-F offers cross-manufacturer substitution from Cornell Dubilier with equivalent electrical performance. The surface mount land width of 19.00mm differs from the standard 17.00mm specification. PCB layout verification is required to confirm pad compatibility before implementation.

Frequently Asked Questions (FAQ)

Q: Can EEE-FK2A151AM replace EEV-FK2A151M directly?

A: Yes. Both parts share identical capacitance (150 µF), voltage rating (100 V), tolerance (±20%), thermal lifetime (5000 Hrs @ 105°C), ripple current specifications, impedance (170 mOhms), and mechanical dimensions. The primary difference is packaging format (Tape & Reel versus Cut Tape) and the addition of high temperature reflow capability in the EEE variant.

Q: What is the difference between EEV-FK2A151V and EEV-FK2A151M?

A: Both parts are electrically and mechanically identical. EEV-FK2A151V is designated as anti-vibration series within the FK product line. All electrical parameters, thermal specifications, case dimensions, and land sizes are equivalent.

Q: Can AFK157M2AP44T-F be used as a direct substitute?

A: Electrical substitution is valid. The surface mount land width is 19.00mm compared to the standard 17.00mm width of the primary part and other Panasonic alternatives. PCB layout must be verified to confirm pad compatibility and clearance before component placement.

Q: Are all substitute parts AEC-Q200 qualified?

A: Yes. All listed substitute parts carry AEC-Q200 automotive qualification, meeting automotive industry reliability and quality standards.

Q: Do all parts meet RoHS3 compliance?

A: Yes. All substitute parts are RoHS3 compliant with REACH unaffected status.