EEV-EB2D100Q Equivalent & Substitute Parts

Part Overview

The EEV-EB2D100Q is a 10 µF, 200 V aluminum electrolytic capacitor in surface mount radial can package manufactured by Panasonic Electronic Components. This component is classified as obsolete, necessitating identification of equivalent and substitute parts for ongoing design support and procurement continuity. The part operates across a temperature range of -25°C to 105°C with a rated lifetime of 4000 hours at 105°C, making it suitable for general-purpose applications requiring stable capacitance performance in moderate voltage environments.

Substiute Parts

EEV-EB2D100Q

Panasonic Electronic ComponentsIn Stock: 1316EEV-EB2D100Q Datasheet

Current PartRFQ

EEV-EB2E100Q

Panasonic Electronic ComponentsIn Stock: 4655EEV-EB2E100Q Datasheet

UpgradeRFQ

EEV-EB2D100Q

Panasonic Electronic ComponentsIn Stock: 1316EEV-EB2D100Q Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for the EEV-EB2D100Q is determined by strict adherence to the following electrical and mechanical parameters:

Critical Parameters for Substitution:

• Capacitance value: 10 µF (exact match required)
• Tolerance: ±20% (exact match required)
• Package type: Radial, Can - SMD (exact match required)
• Physical dimensions: 0.394" Dia (10.00mm), Height 0.669" (17.00mm) (exact match required)
• Mounting type: Surface Mount (exact match required)
• Polarization: Polar (exact match required)

Allowable Variation Parameters:

• Voltage rating: May be equal to or greater than 200 V
• Ripple current specifications: May vary within acceptable operating margins
• Lifetime rating: May be equal to or greater than 4000 Hrs @ 105°C

The EEV-EB2E100Q qualifies as an upgrade substitute due to its higher voltage rating (250 V) while maintaining all other critical parameters identical to the main part.

Parameter Comparison

Engineering Selection Recommendations

Both the EEV-EB2D100Q and EEV-EB2E100Q are classified as obsolete products. The EEV-EB2E100Q serves as an upgrade substitute, offering a higher voltage rating (250 V versus 200 V) while maintaining identical capacitance, tolerance, physical dimensions, and thermal characteristics. Both parts are RoHS Compliant and carry MSL Level 1 (Unlimited) moisture sensitivity ratings, ensuring compliance with current environmental and reliability standards.

Selection between these parts depends on circuit voltage requirements. Applications operating at or below 200 V may use either part. Applications requiring higher voltage margin or operating near 200 V should utilize the EEV-EB2E100Q for enhanced reliability.

Frequently Asked Questions (FAQ)

Q: Can the EEV-EB2E100Q replace the EEV-EB2D100Q in all applications?

A: The EEV-EB2E100Q is a direct substitute for the EEV-EB2D100Q in applications where the circuit voltage does not exceed 200 V. The higher voltage rating (250 V) of the EEV-EB2E100Q provides additional safety margin and is electrically compatible with all circuits designed for the original 200 V part.

Q: Are the physical dimensions identical between these parts?

A: Yes. Both parts share identical physical dimensions: 0.394" diameter (10.00mm), 0.669" maximum seated height (17.00mm), and 0.406" x 0.406" (10.30mm x 10.30mm) surface mount land size. PCB layout and mounting procedures remain unchanged.

Q: What is the significance of the ripple current differences?

A: The EEV-EB2E100Q exhibits slightly higher ripple current ratings (48.4 mA @ 120 Hz and 88 mA @ 100 kHz) compared to the EEV-EB2D100Q (44 mA @ 120 Hz and 80 mA @ 100 kHz). This reflects the higher voltage rating and does not affect substitution compatibility for applications within the original design specifications.

Q: Are both parts RoHS compliant?

A: Yes. Both the EEV-EB2D100Q and EEV-EB2E100Q are RoHS Compliant and carry MSL Level 1 (Unlimited) moisture sensitivity ratings, meeting current environmental and reliability standards.

Q: Why are both parts classified as obsolete?

A: Both parts carry obsolete product status from Panasonic Electronic Components. This classification indicates discontinued manufacturing. Existing inventory remains available for procurement, but long-term availability cannot be guaranteed.