EEU-TP1V271 Equivalent & Substitute Parts

Part Overview

The EEU-TP1V271 is a 270 µF, 35 V aluminum electrolytic capacitor in radial, can package configuration manufactured by Panasonic Electronic Components. This component is rated for automotive applications with AEC-Q200 compliance and operates across a temperature range of -40°C to 135°C with a rated lifetime of 3000 hours at 125°C. The part is currently in active production status with full RoHS3 compliance. Substitute parts are identified when packaging format differs while maintaining identical electrical and mechanical specifications, enabling flexible procurement and supply chain optimization.

Substiute Parts

EEU-TP1V271

Panasonic Electronic ComponentsIn Stock: 1075EEU-TP1V271 Datasheet

Current PartRFQ

EEU-TP1V271B

Panasonic Electronic ComponentsIn Stock: 1391EEU-TP1V271B Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the EEU-TP1V271 is determined by strict equivalence across all electrical and mechanical parameters. The primary differentiator between the main part and its substitute is packaging format. Both the EEU-TP1V271 (Bulk packaging) and EEU-TP1V271B (Cut Tape packaging) maintain identical specifications for capacitance, voltage rating, tolerance, temperature performance, ripple current ratings, physical dimensions, lead spacing, mounting configuration, and automotive compliance certifications. The substitution is valid because packaging format does not affect electrical performance or mechanical fit in through-hole applications. Selection between these parts depends solely on procurement and assembly process requirements.

Parameter Comparison

Engineering Selection Recommendations

Both EEU-TP1V271 and EEU-TP1V271B are active production parts with full AEC-Q200 automotive qualification and RoHS3 compliance. Selection between these parts is based on supply chain and assembly process requirements rather than electrical or mechanical performance differences. The EEU-TP1V271 in Bulk packaging is suitable for high-volume manufacturing environments with in-house tape-and-reel conversion capabilities. The EEU-TP1V271B in Cut Tape packaging is optimized for automated pick-and-place assembly systems and lower-volume production runs. Both parts maintain identical electrical performance, thermal characteristics, and compliance certifications, ensuring functional equivalence in automotive circuit applications.

Frequently Asked Questions (FAQ)

Q: Can EEU-TP1V271B be used as a direct replacement for EEU-TP1V271?

A: Yes. Both parts are electrically and mechanically identical. The only difference is packaging format (Bulk versus Cut Tape). Direct substitution is valid for through-hole assembly applications.

Q: Does packaging format affect electrical performance?

A: No. Packaging format is a supply and assembly consideration only. Electrical specifications, thermal performance, and ripple current ratings are identical between both parts.

Q: Are both parts suitable for automotive applications?

A: Yes. Both EEU-TP1V271 and EEU-TP1V271B carry AEC-Q200 qualification and are rated for automotive use across the full operating temperature range of -40°C to 135°C.

Q: What is the difference between Bulk and Cut Tape packaging?

A: Bulk packaging is supplied as loose components suitable for manual assembly or tape-and-reel conversion. Cut Tape packaging is pre-formatted for automated pick-and-place assembly systems.

Q: Are both parts RoHS3 compliant?

A: Yes. Both EEU-TP1V271 and EEU-TP1V271B are ROHS3 compliant with MSL rating of 1 (Unlimited) and REACH Unaffected status.

Q: Can these parts be used interchangeably in production?

A: Yes, provided your assembly process can accommodate the packaging format. Electrical and mechanical specifications are identical, ensuring functional equivalence.