EEU-FS0J562 Equivalent & Substitute Parts

Part Overview

The EEU-FS0J562 is a 5600 µF, 6.3 V aluminum electrolytic capacitor in radial, can package manufactured by Panasonic Electronic Components. This component is rated for 10000 hours at 105°C and is designed for general purpose applications requiring stable capacitance and low impedance characteristics. The part maintains Active product status with full RoHS3 compliance.

Substitute parts become necessary when the primary manufacturer experiences supply constraints, when design requirements mandate alternative sourcing options, or when inventory availability necessitates qualified alternatives that meet identical electrical and mechanical specifications.

Substiute Parts

EEU-FS0J562

Panasonic Electronic ComponentsIn Stock: 1240EEU-FS0J562 Datasheet

Current PartRFQ

UHW0J562MHD6

NichiconIn Stock: 1108UHW0J562MHD6 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the EEU-FS0J562 is determined by strict equivalence across the following critical parameters:

• Capacitance value: 5600 µF (exact match required)
• Voltage rating: 6.3 V (exact match required)
• Tolerance: ±20% (exact match required)
• Lifetime specification: 10000 Hrs @ 105°C (exact match required)
• Operating temperature range: -40°C ~ 105°C (exact match required)
• Polarization: Polar (exact match required)
• Impedance: 15 mOhms (exact match required)
• Physical dimensions: 0.492" Dia (12.50mm), Height 1.063" (27.00mm), Lead Spacing 0.197" (5.00mm) (exact match required)
• Mounting type: Through Hole, Radial Can package (exact match required)
• Compliance: RoHS3 Compliant (exact match required)

The substitute part UHW0J562MHD6 manufactured by Nichicon meets all specified electrical and mechanical parameters, enabling direct functional replacement in circuit designs.

Parameter Comparison

Engineering Selection Recommendations

The EEU-FS0J562 (Panasonic FS-A series) maintains Active product status and is the primary selection for new designs. This part carries full RoHS3 compliance and REACH unaffected status, meeting current regulatory requirements.

The UHW0J562MHD6 (Nichicon UHW series) is classified as Not For New Designs but remains electrically and mechanically equivalent. This substitute is suitable for legacy system maintenance, field replacements, or supply chain alternatives when the primary part is unavailable. The substitute also maintains RoHS3 compliance and REACH unaffected status.

Both parts are functionally interchangeable based on provided specifications. Selection between them should be driven by availability, supply chain strategy, and design phase requirements.

Frequently Asked Questions (FAQ)

Q: Can UHW0J562MHD6 be used as a direct replacement for EEU-FS0J562 in existing designs?

A: Yes. Both parts share identical electrical specifications (5600 µF, 6.3 V, ±20% tolerance, 10000 Hrs @ 105°C) and mechanical dimensions (0.492" Dia, 1.063" height, 5.00mm lead spacing). The radial, can package and through-hole mounting are identical, enabling direct PCB substitution without layout modifications.

Q: What is the difference in ripple current ratings between these parts?

A: Ripple current specifications are nominally equivalent. At 120 Hz, EEU-FS0J562 is rated 2.552 A versus 2.56 A for UHW0J562MHD6. At 100 kHz, ratings are 3.19 A and 3.2 A respectively. These minor variations fall within normal manufacturing tolerances and do not affect functional compatibility.

Q: Why is UHW0J562MHD6 marked "Not For New Designs"?

A: This designation reflects the manufacturer's product lifecycle status. The part remains fully compliant and functionally equivalent but is reserved for legacy support and field replacements rather than new product development. For new designs, EEU-FS0J562 is the recommended selection.

Q: Are both parts RoHS3 compliant?

A: Yes. Both EEU-FS0J562 and UHW0J562MHD6 are RoHS3 compliant and REACH unaffected, meeting current environmental and regulatory standards.

Q: What is the lead spacing tolerance, and does it affect PCB compatibility?

A: Lead spacing is 0.197" (5.00mm) for both parts. This specification is fixed and identical between the two components, ensuring PCB footprint compatibility without modification.