EEU-FC1C560H Equivalent & Substitute Parts

Part Overview

The EEU-FC1C560H is a 56 µF, 16 V aluminum electrolytic capacitor manufactured by Panasonic Electronic Components in the FC series. This radial, through-hole component is rated for 1000 hours at 105°C and meets AEC-Q200 automotive qualification standards. The part is currently active in production and available in cut tape packaging.

Equivalent and substitute parts are necessary when the primary part number becomes unavailable, when alternative packaging formats are required, or when design requirements permit selection from qualified alternatives with compatible electrical and mechanical characteristics.

Substiute Parts

EEU-FC1C560H

Panasonic Electronic ComponentsIn Stock: 889EEU-FC1C560H Datasheet

Current PartRFQ

EEU-FC1C560

Panasonic Electronic ComponentsIn Stock: 2088EEU-FC1C560 Datasheet

SimilarRFQ

UPM1C560MDD

NichiconIn Stock: 2401UPM1C560MDD Datasheet

SimilarRFQ

UPW1C560MDD

NichiconIn Stock: 1646UPW1C560MDD Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the EEU-FC1C560H is determined by the following criteria:

• Electrical Parameters: Capacitance (56 µF), voltage rating (16 V), and tolerance (±20%) must match exactly
• Mechanical Parameters: Package type (radial, can), mounting type (through hole), and physical dimensions must be compatible with the PCB layout
• Environmental Specifications: Operating temperature range (-55°C to 105°C) and RoHS3 compliance must be maintained
• Polarization: Polar configuration must be preserved

The following parts meet these substitution criteria:

1. EEU-FC1C560 (Panasonic) – Same electrical specifications, identical series, differs only in packaging (bulk vs. cut tape) and lead spacing (2.00mm vs. 2.50mm)
2. UPM1C560MDD (Nichicon) – Equivalent electrical specifications with extended lifetime (2000 hrs @ 105°C), lead spacing 2.00mm, height 12.50mm
3. UPW1C560MDD (Nichicon) – Equivalent electrical specifications with extended lifetime (2000 hrs @ 105°C), lead spacing 2.00mm, height 11.00mm

Parameter Comparison

Engineering Selection Recommendations

Primary Selection: EEU-FC1C560H remains the recommended choice for new designs and production orders. The part is active in production, available in cut tape packaging, and meets all AEC-Q200 automotive qualification requirements.

Packaging Alternative: EEU-FC1C560 is electrically and mechanically equivalent to the primary part, differing only in packaging format (bulk vs. cut tape) and lead spacing (2.00mm vs. 2.50mm). This part is suitable when bulk packaging is acceptable and PCB layout accommodates the 2.00mm lead spacing.

Extended Lifetime Alternatives: UPM1C560MDD and UPW1C560MDD are Nichicon equivalents with doubled lifetime ratings (2000 hrs @ 105°C vs. 1000 hrs @ 105°C). Both parts are marked as obsolete. UPM1C560MDD maintains a height of 12.50mm, while UPW1C560MDD is compact at 11.00mm. Both use 2.00mm lead spacing. These parts are suitable only when extended thermal life is required and PCB layout permits the alternative dimensions.

All substitute parts maintain ROHS3 compliance and are rated for the full operating temperature range of -55°C to 105°C.

Frequently Asked Questions (FAQ)

Q: Can EEU-FC1C560 be used as a direct replacement for EEU-FC1C560H?

A: EEU-FC1C560 is electrically equivalent with identical capacitance, voltage, tolerance, and lifetime specifications. The primary differences are packaging format (bulk vs. cut tape) and lead spacing (2.00mm vs. 2.50mm). Substitution is valid if the PCB layout accommodates 2.00mm lead spacing and bulk packaging is acceptable for your assembly process.

Q: What is the difference between the Panasonic FC series and Nichicon UPM/UPW series?

A: Both manufacturers produce 56 µF, 16 V radial aluminum electrolytic capacitors meeting the same electrical specifications and AEC-Q200 automotive standards. The Nichicon UPM and UPW series offer extended lifetime (2000 hrs @ 105°C) compared to the Panasonic FC series (1000 hrs @ 105°C). However, both Nichicon series are marked as obsolete and should be used only when extended thermal life justifies the obsolescence risk.

Q: Are there mechanical compatibility concerns when substituting with UPM1C560MDD or UPW1C560MDD?

A: Yes. UPM1C560MDD has a maximum seated height of 12.50mm (0.50mm taller than EEU-FC1C560H), and UPW1C560MDD has a maximum seated height of 11.00mm (1.00mm shorter). All three parts use 5.00mm diameter cans and 2.00mm or 2.50mm lead spacing. PCB layout must accommodate these dimensional variations before substitution.

Q: Do all substitute parts meet automotive qualification requirements?

A: EEU-FC1C560H and EEU-FC1C560 are both rated AEC-Q200. UPM1C560MDD is rated AEC-Q200. UPW1C560MDD does not list AEC-Q200 rating. For automotive applications requiring AEC-Q200 compliance, use only EEU-FC1C560H, EEU-FC1C560, or UPM1C560MDD.

Q: What is the impact of different impedance values across these parts?

A: EEU-FC1C560H and EEU-FC1C560 both have 800 mOhms impedance. UPM1C560MDD has 650 mOhms, and UPW1C560MDD has 600 mOhms. Lower impedance may improve high-frequency ripple current performance but does not affect the fundamental capacitance or voltage rating. Impedance differences are relevant only in applications with specific ripple current or frequency response requirements.