EEU-FC1C152S Equivalent & Substitute Parts

Part Overview

The EEU-FC1C152S is a 1500 µF, 16 V aluminum electrolytic capacitor in radial, can package manufactured by Panasonic Electronic Components. This component is rated for 5000 hours at 105°C and meets AEC-Q200 automotive specifications. The part is currently active and available in production quantities.

Substitute parts are necessary when the primary part becomes unavailable, when design requirements demand extended operational lifetime, or when alternative manufacturers' components meet identical electrical and mechanical specifications for system compatibility.

Key Parameters

Parameter	Value
Capacitance	1500 µF
Voltage Rating	16 V
Tolerance	±20%
Lifetime @ 105°C	5000 Hrs
Operating Temperature Range	-55°C to 105°C
Polarization	Polar
Package Type	Radial, Can
Mounting Type	Through Hole
Lead Spacing	0.295" (7.50 mm)
Diameter	0.630" (16.00 mm)
Height	0.591" (15.00 mm)

Substitute Part Grouping Explanation

Substitution eligibility for the EEU-FC1C152S is determined by the following criteria:

Primary Substitution Parameters:

Capacitance: 1500 µF (exact match required)
Voltage Rating: 16 V (exact match required)
Tolerance: ±20% (exact match required)
Polarization: Polar (exact match required)
Package Type: Radial, Can (exact match required)
Mounting Type: Through Hole (exact match required)

Secondary Compatibility Parameters:

Operating Temperature Range: -55°C to 105°C (must meet or exceed)
Lifetime @ 105°C: 5000 Hrs minimum (equal or greater acceptable)
Lead Spacing: 0.295" (7.50 mm) or 0.197" (5.00 mm) acceptable with PCB layout verification
Physical Dimensions: Variations acceptable if PCB footprint accommodates

Substitute parts are grouped into two categories: direct Panasonic FC series alternatives and cross-manufacturer equivalents from Chemi-Con and Nichicon that meet all electrical specifications and automotive compliance requirements.

Parameter Comparison

Part Number	Manufacturer	Capacitance	Voltage	Tolerance	Lifetime @ 105°C	Operating Temp	Lead Spacing	Diameter	Height	Product Status	AEC-Q200
EEU-FC1C152S	Panasonic	1500 µF	16 V	±20%	5000 Hrs	-55°C to 105°C	0.295" (7.50 mm)	0.630" (16.00 mm)	0.591" (15.00 mm)	Active	Yes
EEU-FC1C152L	Panasonic	1500 µF	16 V	±20%	3000 Hrs	-55°C to 105°C	0.197" (5.00 mm)	0.394" (10.00 mm)	1.181" (30.00 mm)	Active	Yes
ELXZ160ELL152MJ30S	Chemi-Con	1500 µF	16 V	±20%	5000 Hrs	-55°C to 105°C	0.197" (5.00 mm)	0.394" (10.00 mm)	1.240" (31.50 mm)	Active	Yes
ELXZ160ELL152MK20S	Chemi-Con	1500 µF	16 V	±20%	7000 Hrs	-55°C to 105°C	0.197" (5.00 mm)	0.492" (12.50 mm)	0.846" (21.50 mm)	Active	Yes
UPJ1C152MHD	Nichicon	1500 µF	16 V	±20%	5000 Hrs	-55°C to 105°C	0.197" (5.00 mm)	0.492" (12.50 mm)	1.043" (26.50 mm)	Not For New Designs	No
UPM1C152MHD	Nichicon	1500 µF	16 V	±20%	5000 Hrs	-55°C to 105°C	0.197" (5.00 mm)	0.492" (12.50 mm)	1.063" (27.00 mm)	Not For New Designs	Yes
UPS1C152MHD	Nichicon	1500 µF	16 V	±20%	3000 Hrs	-55°C to 105°C	0.197" (5.00 mm)	0.492" (12.50 mm)	0.866" (22.00 mm)	Not For New Designs	No
UPW1C152MPD6	Nichicon	1500 µF	16 V	±20%	5000 Hrs	-55°C to 105°C	0.197" (5.00 mm)	0.394" (10.00 mm)	1.240" (31.50 mm)	Not For New Designs	No

Engineering Selection Recommendations

Preferred Substitutes (Active Production Status):

EEU-FC1C152L and ELXZ160ELL152MJ30S are direct substitutes with active product status. Both maintain 1500 µF capacitance, 16 V rating, ±20% tolerance, and -55°C to 105°C operating range. EEU-FC1C152L offers reduced lifetime (3000 Hrs @ 105°C) compared to the primary part. ELXZ160ELL152MJ30S matches the 5000-hour lifetime specification and carries AEC-Q200 automotive certification.

ELXZ160ELL152MK20S provides extended lifetime (7000 Hrs @ 105°C) with active production status and AEC-Q200 compliance, suitable for applications requiring enhanced reliability margins.

Cross-Manufacturer Alternatives (Nichicon):

UPM1C152MHD meets electrical specifications with 5000-hour lifetime and AEC-Q200 certification but carries "Not For New Designs" status. This part is suitable for legacy system maintenance and field replacement only.

UPJ1C152MHD and UPS1C152MHD carry "Not For New Designs" designation and are not recommended for new circuit implementations.

UPW1C152MPD6 is marked "Not For New Designs" and lacks AEC-Q200 certification, limiting its application scope.

Physical Footprint Considerations:

The primary part EEU-FC1C152S features 0.295" (7.50 mm) lead spacing and 0.630" (16.00 mm) diameter. All substitute parts use 0.197" (5.00 mm) lead spacing with smaller diameters (0.394" to 0.492"). PCB layout verification is required to confirm footprint compatibility before substitution.

Frequently Asked Questions (FAQ)

Q: Can EEU-FC1C152L replace EEU-FC1C152S directly?

A: Electrical substitution is valid. Both parts share identical capacitance (1500 µF), voltage (16 V), tolerance (±20%), and operating temperature range (-55°C to 105°C). The primary difference is reduced lifetime (3000 Hrs vs. 5000 Hrs @ 105°C). Physical dimensions differ: EEU-FC1C152L uses 0.197" lead spacing versus 0.295" on the primary part. PCB layout must accommodate the smaller footprint.

Q: What is the difference between Chemi-Con ELXZ160ELL152MJ30S and ELXZ160ELL152MK20S?

A: Both parts are electrically equivalent with 1500 µF, 16 V, ±20% tolerance, and AEC-Q200 certification. ELXZ160ELL152MJ30S provides 5000-hour lifetime at 105°C. ELXZ160ELL152MK20S extends this to 7000 hours. Physical dimensions vary: MJ30S measures 0.394" diameter × 1.240" height; MK20S measures 0.492" diameter × 0.846" height. Selection depends on available PCB space and required operational lifetime.

Q: Why are Nichicon UPM1C152MHD and UPJ1C152MHD marked "Not For New Designs"?

A: "Not For New Designs" status indicates these parts are in mature or declining production phases. Manufacturers apply this designation when transitioning product lines or consolidating portfolios. These parts remain available for existing system support and field replacement but should not be specified in new circuit designs.

Q: Are all substitute parts AEC-Q200 certified?

A: No. AEC-Q200 certification is present on EEU-FC1C152S, EEU-FC1C152L, ELXZ160ELL152MJ30S, ELXZ160ELL152MK20S, and UPM1C152MHD. UPJ1C152MHD, UPS1C152MHD, and UPW1C152MPD6 lack this certification. For automotive applications requiring AEC-Q200 compliance, select only certified alternatives.

Q: What are the ripple current differences among substitutes?

A: Ripple current specifications vary across manufacturers and series. The primary part EEU-FC1C152S handles 1.352 A @ 120 Hz and 1.69 A @ 100 kHz. Substitute parts range from 0.996 A to 1.543 A @ 120 Hz and 1.25 A to 1.815 A @ 100 kHz. Circuit design must verify that selected substitute meets application ripple current requirements.

Q: Can I use a substitute with different lead spacing on my existing PCB?

A: Lead spacing substitution requires PCB layout modification. The primary part uses 0.295" (7.50 mm) spacing; all substitutes use 0.197" (5.00 mm). Existing through-hole pads cannot accommodate the smaller spacing without rework. New PCB layouts must be designed to match the selected substitute's lead spacing.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message