Omron EE-SH3-GS Optical Sensor: Equivalent & Substitute Parts

Part Overview

The Omron EE-SH3-GS is an optical sensor in the through-beam phototransistor category, designed for PCB mounting applications with a 0.134" (3.4mm) sensing distance. This component is classified as obsolete, making identification of active equivalent parts essential for ongoing production support and design updates. The EE-SH3-GS maintains full electrical and mechanical compatibility with its active substitutes within the EE-SV3 series, which share identical sensing parameters and mounting specifications.

Substiute Parts

EE-SH3-GS

Omron Electronics Inc-EMC DivIn Stock: 1006EE-SH3-GS Datasheet

Current PartRFQ

EE-SV3-CS

Omron Electronics Inc-EMC DivIn Stock: 1206EE-SV3-CS Datasheet

Parametric EquivalentRFQ

EE-SV3-DS

Omron Electronics Inc-EMC DivIn Stock: 1963EE-SV3-DS Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the EE-SH3-GS are determined by equivalence across the following critical parameters:

• Sensing distance: 0.134" (3.4mm)
• Sensing method: Through-beam optical detection
• Output configuration: Phototransistor
• Electrical ratings: If (Max) 50 mA, Ic (Max) 20 mA, VCEO (Max) 30 V
• Response time: 4µs, 4µs
• Operating temperature: -25°C ~ 85°C
• Mounting and package: PCB mount with solder connection

The EE-SV3-CS and EE-SV3-DS are parametric equivalents that satisfy all substitution criteria. Both parts maintain identical electrical performance characteristics and mechanical compatibility with the obsolete EE-SH3-GS.

Parameter Comparison

Engineering Selection Recommendations

Both EE-SV3-CS and EE-SV3-DS are active production parts suitable for replacing the obsolete EE-SH3-GS. Selection between these two substitutes should be based on packaging and moisture sensitivity requirements:

The EE-SV3-CS is supplied in bulk packaging and carries an MSL rating of Not Applicable, suitable for standard storage and handling conditions.

The EE-SV3-DS is supplied in bulk packaging with MSL 1 (Unlimited), providing enhanced moisture tolerance for extended storage or humid environments.

Both parts carry ROHS3 compliance and REACH Unaffected status, meeting current regulatory requirements. Electrical and thermal performance are identical across all three part numbers.

Frequently Asked Questions (FAQ)

Q: Can EE-SV3-CS and EE-SV3-DS be used interchangeably with EE-SH3-GS?

A: Yes. Both EE-SV3-CS and EE-SV3-DS are parametric equivalents with identical electrical ratings, sensing distance, response time, and operating temperature range. PCB layouts and circuit designs require no modification.

Q: What is the difference between EE-SV3-CS and EE-SV3-DS?

A: The primary difference is moisture sensitivity level. EE-SV3-CS has MSL Not Applicable, while EE-SV3-DS has MSL 1 (Unlimited). Both maintain identical electrical performance and are suitable for PCB mount applications.

Q: Why is the EE-SH3-GS classified as obsolete?

A: The EE-SH3-GS has been superseded by the active EE-SV3 series. The EE-SV3-CS and EE-SV3-DS provide equivalent functionality with current production support and updated compliance certifications.

Q: Are there any packaging differences between these parts?

A: All three parts use PCB mount packaging with solder connection. EE-SV3-CS and EE-SV3-DS are supplied in bulk packaging, while EE-SH3-GS packaging information is not specified in the available data.

Q: Do these parts require any circuit design changes?

A: No. The EE-SV3-CS and EE-SV3-DS maintain full electrical and mechanical compatibility with EE-SH3-GS across all specified parameters, including current ratings, voltage ratings, response time, and operating temperature range.