EEF-HD0J101R Equivalent & Substitute Parts

Part Overview

The EEF-HD0J101R is a 100 µF, 6.3 V aluminum polymer capacitor manufactured by Panasonic Electronic Components in the SP-Cap HD series. This component is classified as obsolete, making equivalent substitute parts necessary for new designs and ongoing production requirements. The part is housed in a 2917 (7343 Metric) surface mount package with 15 mOhm ESR and operates across -40°C to 125°C.

Substiute Parts

EEF-HD0J101R

Panasonic Electronic ComponentsIn Stock: 1068EEF-HD0J101R Datasheet

Current PartRFQ

A700V107M006ATE015

KEMETIn Stock: 2005A700V107M006ATE015 Datasheet

DirectRFQ

A700X107M008ATE010

KEMETIn Stock: 2222A700X107M008ATE010 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the EEF-HD0J101R are classified into two categories based on electrical and mechanical compatibility:

Direct Substitutes maintain all critical electrical parameters: 100 µF capacitance, 6.3 V voltage rating, ±20% tolerance, 15 mOhm ESR, and identical 2917 (7343 Metric) package dimensions. These parts are pin-compatible and functionally equivalent for applications requiring the specified voltage and ESR characteristics.

Similar Substitutes share the same capacitance (100 µF), tolerance (±20%), and package footprint (2917 / 7343 Metric) but differ in voltage rating (8 V instead of 6.3 V) and ESR (10 mOhm instead of 15 mOhm). These parts are suitable only for applications where the higher voltage rating and lower ESR provide design benefits or where the original 6.3 V specification is not a hard requirement.

Parameter Comparison

Engineering Selection Recommendations

A700V107M006ATE015 is the primary substitute for direct replacement. This KEMET part maintains identical electrical specifications (100 µF, 6.3 V, 15 mOhm ESR) and package dimensions. The part is active in production with ROHS3 compliance and REACH unaffected status. The extended operating temperature range (-55°C to 125°C) and higher ripple current capability (4.2 A @ 100 kHz) provide additional design margin. Packaging is available in Tape & Reel format.

A700X107M008ATE010 serves as an alternative where circuit design permits a higher voltage rating (8 V) and lower ESR (10 mOhm) are beneficial. This KEMET part is also active with ROHS3 compliance and REACH unaffected status. The 8 V rating provides overvoltage protection margin, and the 10 mOhm ESR reduces thermal dissipation in high-ripple-current applications. Packaging is available in Cut Tape and Digi-Reel format. This substitution requires circuit validation to confirm the higher voltage rating does not conflict with design specifications.

Frequently Asked Questions (FAQ)

Q: Can A700V107M006ATE015 be used as a direct drop-in replacement for EEF-HD0J101R?

A: Yes. The A700V107M006ATE015 maintains identical capacitance (100 µF), voltage rating (6.3 V), tolerance (±20%), ESR (15 mOhm), and package footprint (2917 / 7343 Metric). No circuit modifications are required.

Q: What is the difference between the direct substitute and the similar substitute?

A: The direct substitute (A700V107M006ATE015) matches the 6.3 V voltage rating and 15 mOhm ESR exactly. The similar substitute (A700X107M008ATE010) has a higher voltage rating (8 V) and lower ESR (10 mOhm). The similar substitute is suitable only if the circuit design permits these parameter changes.

Q: Are both KEMET substitutes available in the same packaging format?

A: No. A700V107M006ATE015 is supplied in Tape & Reel (TR) format. A700X107M008ATE010 is supplied in Cut Tape (CT) and Digi-Reel format. Packaging selection depends on assembly process requirements.

Q: Do the substitute parts have the same moisture sensitivity level?

A: Yes. Both substitute parts carry MSL 3 (168 Hours) rating, identical to the original EEF-HD0J101R.

Q: What compliance certifications apply to the substitute parts?

A: Both KEMET substitutes are ROHS3 compliant and REACH unaffected. The original Panasonic part does not list these certifications in the provided data.