Equivalent & Substitute Parts for EEE-HD1V470AP

Part Overview

The EEE-HD1V470AP is a 47 µF, 35 V aluminum electrolytic capacitor in surface mount radial can package manufactured by Panasonic Electronic Components. This component is rated for 5000 hours at 105°C and meets AEC-Q200 automotive qualification standards. The part is actively produced and suitable for automotive and high-temperature reflow applications.

Substitute parts are identified when equivalent electrical performance can be maintained within the allowed parameter tolerances for the application, or when upgraded specifications provide direct compatibility with improved reliability margins.

Substiute Parts

EEE-HD1V470AP

Panasonic Electronic ComponentsIn Stock: 1323EEE-HD1V470AP Datasheet

Current PartRFQ

EEE-HC1H470P

Panasonic Electronic ComponentsIn Stock: 1646EEE-HC1H470P Datasheet

UpgradeRFQ

EEE-FC1V470AP

Panasonic Electronic ComponentsIn Stock: 4568EEE-FC1V470AP Datasheet

SimilarRFQ

EEE-FC1V470P

Panasonic Electronic ComponentsIn Stock: 1254EEE-FC1V470P Datasheet

SimilarRFQ

EEE-HDV470XAP

Panasonic Electronic ComponentsIn Stock: 2094EEE-HDV470XAP Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the EEE-HD1V470AP is determined by the following criteria:

Primary Substitution Parameters:

• Capacitance: 47 µF (fixed requirement)
• Tolerance: ±20% (fixed requirement)
• Voltage Rating: 35 V minimum (equal or higher voltage acceptable)
• Lifetime: 5000 Hrs @ 105°C minimum (equal or higher acceptable)
• Operating Temperature: -40°C to 105°C (must match or exceed)
• Polarization: Polar (fixed requirement)
• Mounting Type: Surface Mount (fixed requirement)
• Package / Case: Radial, Can - SMD (fixed requirement)
• Surface Mount Land Size: 0.327" L x 0.327" W (8.30mm x 8.30mm) (fixed requirement)
• RoHS Status: ROHS3 Compliant (fixed requirement)
• AEC-Q200 Rating: Required for automotive applications

Substitution Categories:

Upgrade Substitutes: Parts with identical capacitance, tolerance, and operating temperature range, but with higher voltage rating or equal/superior lifetime rating. These provide enhanced reliability margins.

Similar Substitutes: Parts with identical capacitance, tolerance, and operating temperature range, but with different lifetime ratings or physical dimensions. These are functionally equivalent but may have different reliability profiles or space constraints.

Parameter Comparison

Engineering Selection Recommendations

EEE-HC1H470P (Upgrade Substitute)

This part is the preferred upgrade substitute for the EEE-HD1V470AP. It maintains identical capacitance, tolerance, and lifetime specifications while providing a higher voltage rating of 50 V. The increased voltage margin enhances circuit reliability without compromising form factor compatibility. Both parts are ROHS3 compliant, AEC-Q200 rated, and actively produced. The surface mount land size and mounting footprint are identical, enabling direct board-level substitution. This part is suitable for new designs.

EEE-HDV470XAP (Similar Substitute - Compact Form Factor)

This part is functionally equivalent to the EEE-HD1V470AP with identical electrical specifications and 5000-hour lifetime rating. The primary difference is a reduced physical footprint: 0.248" diameter (6.30mm) versus 0.315" diameter (8.00mm), with corresponding reductions in height and land size. This part is ROHS3 compliant, AEC-Q200 rated, and actively produced. Selection of this part requires verification that the smaller land size (0.260" L x 0.260" W / 6.60mm x 6.60mm) is compatible with the PCB layout. This substitute is appropriate when space constraints permit the smaller package.

EEE-FC1V470AP and EEE-FC1V470P (Similar Substitutes - Legacy Status)

Both EEE-FC series parts maintain identical capacitance, tolerance, voltage rating, and operating temperature range. However, they are designated "Not For New Designs" and feature reduced lifetime ratings of 1000 hours at 105°C compared to the 5000-hour specification of the main part. These parts are RoHS compliant but not ROHS3 compliant. Selection of these parts is restricted to legacy system maintenance or repair applications where the original specification must be matched. These parts are not suitable for new design implementations.

Frequently Asked Questions (FAQ)

Q: Can EEE-HC1H470P be used as a direct replacement for EEE-HD1V470AP?

A: Yes. The EEE-HC1H470P is a direct substitute with identical capacitance (47 µF), tolerance (±20%), lifetime (5000 Hrs @ 105°C), operating temperature range (-40°C to 105°C), and surface mount land size (0.327" L x 0.327" W / 8.30mm x 8.30mm). The higher voltage rating (50 V versus 35 V) provides enhanced reliability margins. Both parts are ROHS3 compliant and AEC-Q200 rated. No design changes are required.

Q: What is the key difference between the upgrade and similar substitutes?

A: The EEE-HC1H470P upgrade substitute provides a higher voltage rating (50 V) while maintaining all other specifications. The similar substitutes (EEE-FC1V470AP, EEE-FC1V470P, EEE-HDV470XAP) maintain the 35 V voltage rating but differ in lifetime rating, product status, or physical dimensions. The EEE-FC series parts have reduced lifetime ratings and legacy status, while EEE-HDV470XAP offers a compact form factor with identical electrical performance.

Q: Can EEE-FC1V470AP or EEE-FC1V470P be used in new automotive designs?

A: No. Both EEE-FC series parts are designated "Not For New Designs" and feature reduced lifetime ratings of 1000 hours at 105°C. These parts are suitable only for legacy system maintenance or repair applications where the original specification must be matched. For new designs, use EEE-HD1V470AP, EEE-HC1H470P, or EEE-HDV470XAP.

Q: Is the EEE-HDV470XAP compatible with the same PCB footprint as EEE-HD1V470AP?

A: The EEE-HDV470XAP has a different surface mount land size (0.260" L x 0.260" W / 6.60mm x 6.60mm) compared to the main part (0.327" L x 0.327" W / 8.30mm x 8.30mm). PCB layout verification is required before substitution. The smaller land size may not be compatible with existing PCB designs without modification.

Q: Are all substitute parts AEC-Q200 rated?

A: Yes. All substitute parts listed (EEE-HC1H470P, EEE-FC1V470AP, EEE-FC1V470P, EEE-HDV470XAP) meet AEC-Q200 automotive qualification standards, as does the main part EEE-HD1V470AP.

Q: What is the difference between ROHS3 and RoHS compliance?

A: ROHS3 compliance represents the current regulatory standard for restriction of hazardous substances. RoHS compliance indicates an earlier version of the standard. EEE-HD1V470AP, EEE-HC1H470P, and EEE-HDV470XAP are ROHS3 compliant. EEE-FC1V470AP and EEE-FC1V470P are RoHS compliant but not ROHS3 compliant. For new designs, ROHS3 compliant parts are preferred.

Q: Can ripple current specifications be used to select between substitute parts?

A: Ripple current specifications are provided for reference but are not primary substitution criteria. All parts maintain the same capacitance and voltage rating, which are the fundamental parameters determining ripple current handling capability. Ripple current values vary due to differences in internal construction and lifetime ratings. Detailed ripple current analysis should be performed based on specific circuit requirements and thermal conditions.