EEE-HBA101UAP Equivalent & Substitute Parts

Part Overview

The EEE-HBA101UAP is a 100 µF, 10 V aluminum electrolytic capacitor in surface mount radial can package manufactured by Panasonic Electronic Components. This part is rated for 2000 hours at 105°C and meets AEC-Q200 automotive qualification standards. The part is currently active and available in Cut Tape and Digi-Reel packaging with 1579 units in stock.

Substitute parts are necessary when the original part becomes unavailable, when design requirements change, or when alternative electrical or thermal performance characteristics are required for specific applications.

Key Parameters

Parameter	Value
Capacitance	100 µF
Voltage Rating	10 V
Tolerance	±20%
Lifetime @ 105°C	2000 Hrs
Operating Temperature Range	-40°C ~ 105°C
Package Type	Radial, Can - SMD
Mounting Type	Surface Mount
Size / Dimension	0.248" Dia (6.30mm)
Height - Seated (Max)	0.228" (5.80mm)
Surface Mount Land Size	0.260" L x 0.260" W (6.60mm x 6.60mm)
Polarization	Polar
AEC-Q200 Rating	Yes
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution of the EEE-HBA101UAP is determined by the following critical parameters:

Electrical Parameters:

Capacitance: 100 µF (fixed requirement)
Tolerance: ±20% (fixed requirement)
Voltage Rating: 10 V minimum (higher voltage ratings are acceptable as upgrades)
Lifetime @ 105°C: 2000 Hrs minimum (higher lifetime values are acceptable)

Mechanical Parameters:

Package Type: Radial, Can - SMD (must match)
Mounting Type: Surface Mount (must match)
Size / Dimension: 0.248" Dia (6.30mm) (must match)
Surface Mount Land Size: 0.260" L x 0.260" W (6.60mm x 6.60mm) (must match)

Compliance Parameters:

AEC-Q200 Rating: Required for automotive applications
RoHS Status: ROHS3 Compliant preferred
Moisture Sensitivity Level: 1 (Unlimited) preferred

Substitute parts are categorized as:

Direct Substitutes: Identical electrical and mechanical specifications
Upgrade Substitutes: Higher voltage rating or improved lifetime while maintaining mechanical compatibility
Similar Substitutes: Same capacitance and voltage but different physical dimensions or performance characteristics

Parameter Comparison

Part Number	Capacitance	Voltage	Tolerance	Lifetime @ 105°C	Operating Temp	Size (Dia)	Height (Max)	Product Status	RoHS
EEE-HBA101UAP	100 µF	10 V	±20%	2000 Hrs	-40°C ~ 105°C	0.248" (6.30mm)	0.228" (5.80mm)	Active	ROHS3
EEE-HA1A101WP	100 µF	10 V	±20%	1000 Hrs	-40°C ~ 105°C	0.248" (6.30mm)	0.213" (5.40mm)	Not For New Designs	RoHS
EEE-HAA101WAP	100 µF	10 V	±20%	1000 Hrs	-40°C ~ 105°C	0.248" (6.30mm)	0.213" (5.40mm)	Active	ROHS3
EEE-FK1C101AP	100 µF	16 V	±20%	2000 Hrs	-55°C ~ 105°C	0.248" (6.30mm)	0.240" (6.10mm)	Active	ROHS3
EEE-FK1C101P	100 µF	16 V	±20%	2000 Hrs	-55°C ~ 105°C	0.248" (6.30mm)	0.240" (6.10mm)	Active	ROHS3
EEE-FP1C101AP	100 µF	16 V	±20%	2000 Hrs	-55°C ~ 105°C	0.248" (6.30mm)	0.228" (5.80mm)	Active	ROHS3
EEE-FT1E101AP	100 µF	25 V	±20%	2000 Hrs	-55°C ~ 105°C	0.248" (6.30mm)	0.240" (6.10mm)	Active	ROHS3
EEE-FT1V101AP	100 µF	35 V	±20%	2000 Hrs	-55°C ~ 105°C	0.248" (6.30mm)	0.240" (6.10mm)	Active	ROHS3
EEE-HBC101UAP	100 µF	16 V	±20%	2000 Hrs	-40°C ~ 105°C	0.248" (6.30mm)	0.228" (5.80mm)	Active	ROHS3
EEE-FK1E101SP	100 µF	25 V	±20%	2000 Hrs	-55°C ~ 105°C	0.248" (6.30mm)	0.240" (6.10mm)	Not For New Designs	ROHS3
EEE-FC1A101P	100 µF	10 V	±20%	1000 Hrs	-40°C ~ 105°C	0.315" (8.00mm)	0.244" (6.20mm)	Not For New Designs	RoHS

Engineering Selection Recommendations

Direct Substitutes (Identical Specifications):

EEE-HAA101WAP is the primary direct substitute. It maintains identical electrical specifications (100 µF, 10 V, ±20%, 2000 Hrs @ 105°C) and mechanical compatibility. This part is Active status and ROHS3 compliant, making it suitable for new designs.

EEE-HA1A101WP provides electrical compatibility but with reduced lifetime (1000 Hrs @ 105°C) and is marked Not For New Designs. Use only when EEE-HAA101WAP is unavailable and thermal cycling requirements do not exceed 1000 hours at 105°C.

Upgrade Substitutes (Higher Voltage Rating):

EEE-HBC101UAP is a voltage upgrade to 16 V while maintaining the same physical footprint (0.248" Dia, 0.228" height) and 2000 Hrs @ 105°C lifetime. This part is Active and ROHS3 compliant. Use when circuit design permits higher voltage rating and improved voltage margin is desired.

EEE-FK1C101AP and EEE-FK1C101P are 16 V upgrades with extended operating temperature range (-55°C ~ 105°C) and 2000 Hrs lifetime. Both are Active and ROHS3 compliant. EEE-FK1C101P offers higher inventory availability (186021 units). Height increases to 0.240" (6.10mm); verify PCB layout clearance before selection.

EEE-FP1C101AP is a 16 V upgrade with improved ESR (260 mOhm @ 100 kHz) and higher ripple current capability (300 mA @ 100 kHz). Height matches the original at 0.228" (5.80mm). Active status and ROHS3 compliant.

EEE-FT1E101AP is a 25 V upgrade with improved ESR (260 mOhm @ 100 kHz) and higher ripple current (300 mA @ 100 kHz). Height increases to 0.240" (6.10mm). Active status and ROHS3 compliant with high inventory (31017 units).

EEE-FT1V101AP is a 35 V upgrade with identical performance characteristics to EEE-FT1E101AP. Highest inventory availability (529400 units). Use when maximum voltage margin is required.

Not Recommended for New Designs:

EEE-HA1A101WP, EEE-FK1E101SP, and EEE-FC1A101P are marked Not For New Designs. These parts should be used only for legacy system maintenance or when no other alternatives are available.

EEE-FC1A101P has different physical dimensions (0.315" Dia, 8.00mm) and is not mechanically compatible with the original footprint.

Frequently Asked Questions (FAQ)

Q: Can I use a higher voltage rated capacitor as a substitute?

A: Yes. A capacitor with higher voltage rating (16 V, 25 V, or 35 V) can replace a 10 V rated capacitor in the same circuit. Higher voltage rating provides additional safety margin and does not degrade circuit performance. Verify that the physical dimensions remain compatible with your PCB layout.

Q: What is the difference between EEE-FK1C101AP and EEE-FK1C101P?

A: Both parts are 100 µF, 16 V, 2000 Hrs @ 105°C with identical electrical specifications. The primary difference is packaging: EEE-FK1C101AP is supplied in Tape & Reel (TR), while EEE-FK1C101P is supplied in Cut Tape (CT) & Digi-Reel. EEE-FK1C101P has significantly higher inventory availability (186021 units vs. 53731 units).

Q: Why does EEE-HA1A101WP have reduced lifetime compared to the original part?

A: EEE-HA1A101WP is rated for 1000 Hrs @ 105°C versus 2000 Hrs for the original EEE-HBA101UAP. This part is marked Not For New Designs and should only be used for legacy applications where thermal cycling requirements do not exceed 1000 hours at 105°C.

Q: Are all substitute parts AEC-Q200 qualified?

A: Yes. All substitute parts listed maintain AEC-Q200 automotive qualification, ensuring compliance with automotive reliability standards.

Q: What is the impact of height differences between substitute parts?

A: The original EEE-HBA101UAP has a maximum seated height of 0.228" (5.80mm). Some upgrades increase height to 0.240" (6.10mm). Verify PCB layout clearance and component spacing before selecting a taller substitute. EEE-FP1C101AP maintains the original height at 0.228" (5.80mm).

Q: Can I use EEE-FC1A101P as a substitute?

A: No. EEE-FC1A101P has different physical dimensions (0.315" Dia vs. 0.248" Dia) and is not mechanically compatible with the original footprint. Additionally, it is marked Not For New Designs and has reduced lifetime (1000 Hrs @ 105°C).

Q: Which substitute offers the best performance upgrade?

A: EEE-FT1V101AP provides the highest voltage rating (35 V) with improved ESR (260 mOhm @ 100 kHz), extended operating temperature range (-55°C ~ 105°C), and the highest inventory availability (529400 units). It maintains mechanical compatibility and is Active status with ROHS3 compliance.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message