EEE-HB1V330AP Equivalent & Substitute Parts

Part Overview

The EEE-HB1V330AP is a 33 µF, 35 V aluminum electrolytic capacitor in surface mount radial can package manufactured by Panasonic Electronic Components. This part is rated for 2000 hours at 105°C and meets AEC-Q200 automotive qualification standards. The part is currently active and available in production quantities.

Substitute parts are necessary when the primary part becomes unavailable, when design requirements change, or when alternative manufacturers are preferred for supply chain diversification. Equivalent parts maintain the same electrical specifications while substitute parts may offer enhanced performance characteristics such as extended lifetime ratings or higher voltage ratings.

Substiute Parts

EEE-HB1V330AP

Panasonic Electronic ComponentsIn Stock: 1418EEE-HB1V330AP Datasheet

Current PartRFQ

EEE-HA1V330P

Panasonic Electronic ComponentsIn Stock: 2944EEE-HA1V330P Datasheet

DirectRFQ

EEE-FK1H330P

Panasonic Electronic ComponentsIn Stock: 1228EEE-FK1H330P Datasheet

UpgradeRFQ

EEE-FC1V330AP

Panasonic Electronic ComponentsIn Stock: 1830EEE-FC1V330AP Datasheet

SimilarRFQ

EEE-FC1V330P

Panasonic Electronic ComponentsIn Stock: 2106EEE-FC1V330P Datasheet

SimilarRFQ

EEE-HA1V330WP

Panasonic Electronic ComponentsIn Stock: 14501EEE-HA1V330WP Datasheet

SimilarRFQ

EEE-HAV330WAP

Panasonic Electronic ComponentsIn Stock: 2883EEE-HAV330WAP Datasheet

SimilarRFQ

EEE-HC1V330XP

Panasonic Electronic ComponentsIn Stock: 1872EEE-HC1V330XP Datasheet

SimilarRFQ

EEE-HD1V330AP

Panasonic Electronic ComponentsIn Stock: 1856EEE-HD1V330AP Datasheet

SimilarRFQ

EEE-HDV330XAP

Panasonic Electronic ComponentsIn Stock: 2603EEE-HDV330XAP Datasheet

SimilarRFQ

UUX1V330MCL1GS

NichiconIn Stock: 4137UUX1V330MCL1GS Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the EEE-HB1V330AP is determined by the following electrical and mechanical parameters:

Electrical Compatibility Requirements:

• Capacitance: 33 µF (exact match required)
• Voltage Rating: 35 V minimum (higher ratings acceptable)
• Tolerance: ±20% (exact match required)
• Operating Temperature: -40°C to 105°C minimum (wider ranges acceptable)
• Polarization: Polar (exact match required)

Mechanical Compatibility Requirements:

• Package Type: Radial, Can - SMD (exact match required)
• Mounting Type: Surface Mount (exact match required)
• Size / Dimension: 0.315" Dia (8.00mm) (exact match required for PCB layout)
• Height - Seated (Max): 0.244" (6.20mm) (exact match or lower acceptable)
• Surface Mount Land Size: 0.327" L x 0.327" W (8.30mm x 8.30mm) (exact match required)

Performance Parameters (Variable):

• Lifetime @ 105°C: 2000 Hrs minimum (higher values acceptable)
• Ripple Current: Specified at 120 Hz and 10 kHz (higher values acceptable)

Substitute parts are grouped into three categories: Direct equivalents (same electrical and mechanical specifications), upgrades (higher voltage or extended lifetime), and similar alternatives (different physical dimensions but same electrical ratings).

Parameter Comparison

Engineering Selection Recommendations

Direct Equivalent (Same Specifications): EEE-HA1V330P and EEE-FC1V330AP/EEE-FC1V330P maintain identical electrical specifications to the EEE-HB1V330AP with matching 33 µF, 35 V, ±20% tolerance, and identical physical dimensions. However, these parts carry "Not For New Designs" status and reduced lifetime ratings of 1000 hours at 105°C compared to the primary part's 2000 hours. These are suitable only for legacy design support or when supply constraints require their use.

Upgrade Options (Enhanced Performance): EEE-FK1H330P provides a voltage upgrade to 50 V while maintaining 2000-hour lifetime and active product status with ROHS3 compliance. This part is suitable when higher voltage margin is required. Height increases to 0.256" (6.50mm), requiring PCB layout verification.

EEE-HD1V330AP and EEE-HDV330XAP offer extended lifetime ratings of 5000 hours at 105°C with active product status and ROHS3 compliance. EEE-HD1V330AP maintains the original 0.315" diameter and 0.244" height. EEE-HDV330XAP uses a smaller 0.248" diameter package with increased height of 0.303" (7.70mm), requiring PCB layout verification.

Alternative Manufacturer: UUX1V330MCL1GS from Nichicon provides equivalent electrical specifications (33 µF, 35 V, 2000 hours at 105°C) with active product status and ROHS3 compliance. This part enables supply chain diversification. Height is 0.256" (6.50mm), requiring PCB layout verification.

Smaller Package Alternatives: EEE-HA1V330WP, EEE-HAV330WAP, EEE-HC1V330XP, and EEE-HDV330XAP use reduced physical dimensions (0.248" diameter, 6.30mm) compared to the primary part. These are suitable only when PCB layout accommodates the different footprint. EEE-HAV330WAP and EEE-HC1V330XP maintain active product status with ROHS3 compliance.

Frequently Asked Questions (FAQ)

Q: Can EEE-HA1V330P be used as a direct replacement for EEE-HB1V330AP?

A: EEE-HA1V330P matches the electrical specifications and physical dimensions of EEE-HB1V330AP. However, it has a reduced lifetime rating of 1000 hours at 105°C compared to 2000 hours for the primary part, and carries "Not For New Designs" status. Use only when supply constraints require substitution.

Q: What is the advantage of EEE-FK1H330P over EEE-HB1V330AP?

A: EEE-FK1H330P provides a higher voltage rating of 50 V compared to 35 V, offering greater voltage margin in the circuit. Both parts maintain 2000-hour lifetime and active product status. The trade-off is a height increase from 0.244" to 0.256" (6.20mm to 6.50mm), which must be verified against PCB clearance requirements.

Q: Are the smaller package parts (0.248" diameter) compatible with the original PCB design?

A: No. Parts with 0.248" diameter (EEE-HA1V330WP, EEE-HAV330WAP, EEE-HC1V330XP, EEE-HDV330XAP) have different surface mount land sizes of 0.260" L x 0.260" W compared to the original 0.327" L x 0.327" W. These require PCB redesign and are not pin-compatible drop-in replacements.

Q: Which substitute part offers the longest operational lifetime?

A: EEE-HD1V330AP and EEE-HDV330XAP both offer 5000-hour lifetime at 105°C, which is 2.5 times longer than the primary part. EEE-HD1V330AP maintains the original 0.315" diameter and 0.244" height, making it a direct mechanical replacement. EEE-HDV330XAP uses a smaller 0.248" diameter package and requires PCB layout verification.

Q: Can UUX1V330MCL1GS from Nichicon be used in automotive applications?

A: UUX1V330MCL1GS is rated for general purpose applications and does not carry AEC-Q200 automotive qualification. The primary part EEE-HB1V330AP and most Panasonic alternatives are AEC-Q200 qualified. Use UUX1V330MCL1GS only in non-automotive applications or when automotive qualification is not required.

Q: What is the difference between EEE-HA1V330P and EEE-HA1V330WP?

A: Both parts are from the Panasonic HA series with identical electrical specifications (33 µF, 35 V, 1000-hour lifetime). The difference is physical size: EEE-HA1V330P uses 0.315" diameter (8.00mm) with 0.244" height (6.20mm), while EEE-HA1V330WP uses 0.248" diameter (6.30mm) with 0.213" height (5.40mm). These require different PCB footprints and are not interchangeable.

Q: Is ROHS3 compliance required for all substitute parts?

A: The primary part EEE-HB1V330AP is ROHS3 compliant. Most active substitute parts (EEE-FK1H330P, EEE-HD1V330AP, EEE-HDV330XAP, EEE-HAV330WAP, EEE-HC1V330XP, UUX1V330MCL1GS) are also ROHS3 compliant. Parts marked "Not For New Designs" (EEE-HA1V330P, EEE-FC1V330AP, EEE-FC1V330P, EEE-HA1V330WP) carry standard RoHS compliance. Verify compliance requirements for your application before selection.