EEE-HB1H100SP Equivalent & Substitute Parts

Part Overview

The EEE-HB1H100SP is a 10 µF, 50 V aluminum electrolytic capacitor in surface mount radial can package, manufactured by Panasonic Electronic Components. This component is rated for automotive applications with AEC-Q200 compliance and operates across -40°C to 105°C with a 2000-hour lifetime at 105°C. The part is currently active in production with ROHS3 compliance and unlimited moisture sensitivity level (MSL 1).

Equivalent and substitute parts are identified when components share identical electrical specifications (capacitance, voltage rating, tolerance, ripple current characteristics) and compatible mechanical packaging that allows direct board-level replacement without circuit redesign.

Substiute Parts

EEE-HB1H100SP

Panasonic Electronic ComponentsIn Stock: 985EEE-HB1H100SP Datasheet

Current PartRFQ

EEE-HB1H100P

Panasonic Electronic ComponentsIn Stock: 1613EEE-HB1H100P Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the EEE-HB1H100SP is determined by strict equivalence across the following parameters:

• Capacitance value: 10 µF (exact match required)
• Voltage rating: 50 V (exact match required)
• Tolerance: ±20% (exact match required)
• Ripple current specifications: 35 mA @ 120 Hz and 59.5 mA @ 10 kHz (exact match required)
• Operating temperature range: -40°C to 105°C (exact match required)
• Lifetime rating: 2000 Hrs @ 105°C (exact match required)
• Package classification: Radial, Can - SMD (exact match required)
• Surface mount land size: 0.260" L x 0.260" W (exact match required)
• Polarization: Polar (exact match required)
• Compliance: AEC-Q200, ROHS3, MSL 1 (exact match required)

The EEE-HB1H100P is identified as a manufacturer-recommended substitute. Both parts are produced by Panasonic Electronic Components within the HB series and maintain identical electrical and mechanical specifications across all critical parameters. The only dimensional variance is seated height (5.70mm vs 5.80mm), which remains within acceptable PCB assembly tolerances for radial can SMD packages.

Parameter Comparison

Engineering Selection Recommendations

Both EEE-HB1H100SP and EEE-HB1H100P are active production components with identical electrical performance and automotive-grade compliance. Selection between these parts is based on availability and supply chain considerations rather than technical differentiation.

The EEE-HB1H100P carries manufacturer recommendation as a substitute and currently maintains higher inventory availability (1550 pcs vs 898 pcs). Both parts satisfy AEC-Q200 automotive qualification, ROHS3 environmental compliance, and unlimited moisture sensitivity requirements. The minimal seated height difference (0.04" / 0.10mm) is within standard PCB assembly tolerances and does not impact circuit functionality or board layout compatibility.

For applications requiring the EEE-HB1H100SP specifically, the EEE-HB1H100P provides direct functional equivalence with no circuit modifications required.

Frequently Asked Questions (FAQ)

Q: Can EEE-HB1H100P replace EEE-HB1H100SP in existing designs?

A: Yes. Both parts are electrically identical with matching capacitance (10 µF), voltage rating (50 V), tolerance (±20%), ripple current specifications, and operating temperature range. The seated height difference of 0.04" is within standard SMD assembly tolerances and does not affect PCB layout or circuit performance.

Q: Are there any compliance differences between these parts?

A: No. Both parts carry identical certifications: AEC-Q200 automotive rating, ROHS3 compliance, MSL 1 (unlimited moisture sensitivity), and REACH unaffected status.

Q: What determines if a part is a valid substitute for EEE-HB1H100SP?

A: Valid substitutes must match all electrical parameters (10 µF capacitance, 50 V rating, ±20% tolerance, 35 mA @ 120 Hz and 59.5 mA @ 10 kHz ripple current), thermal specifications (2000 Hrs @ 105°C, -40°C to 105°C operating range), package type (Radial, Can - SMD), and land size (0.260" x 0.260"). Compliance ratings (AEC-Q200, ROHS3, MSL 1) must also match.

Q: Does the 0.04" height difference affect board assembly?

A: No. The height variance between EEE-HB1H100SP (5.70mm) and EEE-HB1H100P (5.80mm) is within standard SMD component tolerances and does not impact reflow soldering, component placement, or clearance requirements for typical PCB designs.

Q: Can these parts be used interchangeably in automotive applications?

A: Yes. Both parts are AEC-Q200 qualified and suitable for automotive use. They share identical electrical performance, temperature ratings, and reliability specifications required for automotive-grade applications.