Panasonic EEE-HB0J101P Equivalent & Substitute Parts

Part Overview

The Panasonic EEE-HB0J101P is a 100 µF, 6.3 V aluminum electrolytic capacitor in surface mount radial can package, rated for 2000 hours at 105°C with AEC-Q200 automotive qualification. The part is currently Active and suitable for automotive applications requiring stable capacitance and ripple current performance.

Substitute parts are necessary when the primary part reaches end-of-life status, inventory constraints occur, or design requirements demand enhanced electrical performance such as improved ESR characteristics, extended temperature range, or higher ripple current capability.

Key Parameters

Parameter	Value
Capacitance	100 µF
Voltage Rating	6.3 V
Tolerance	±20%
Lifetime @ 105°C	2000 Hrs
Operating Temperature Range	-40°C ~ 105°C
Package / Case	Radial, Can - SMD
Mounting Type	Surface Mount
Size / Dimension	0.248" Dia (6.30mm)
Height - Seated (Max)	0.228" (5.80mm)
Surface Mount Land Size	0.260" L x 0.260" W (6.60mm x 6.60mm)
Polarization	Polar
Ratings	AEC-Q200
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution eligibility is determined by the following criteria applied strictly to the provided parameters:

Primary Substitution Criteria:

Capacitance: 100 µF (exact match required)
Tolerance: ±20% (exact match required)
Voltage Rating: 6.3 V minimum (equal or higher voltage acceptable)
Package / Case: Radial, Can - SMD (exact match required)
Mounting Type: Surface Mount (exact match required)
Size / Dimension: 0.248" Dia (6.30mm) (exact match required)
Surface Mount Land Size: 0.260" L x 0.260" W (6.60mm x 6.60mm) (exact match required)
Polarization: Polar (exact match required)
AEC-Q200 Automotive Rating: Required
RoHS3 Compliance: Required

Secondary Performance Parameters:

Lifetime @ 105°C: 2000 Hrs minimum
Operating Temperature Range: -40°C minimum to 105°C maximum
Ripple Current capability
ESR characteristics (when specified)

Substitute parts are grouped into two categories: Direct Substitutes (matching all primary criteria at 6.3 V) and Upgrade Substitutes (matching all primary criteria with enhanced performance or higher voltage ratings).

Parameter Comparison

Part Number	Manufacturer	Series	Capacitance	Voltage	Tolerance	Lifetime @ 105°C	Operating Temp Range	Height (Max)	ESR @ 100kHz	Ripple Current @ 120 Hz	Ripple Current @ 100 kHz	Product Status	Packaging
EEE-HB0J101P	Panasonic	HB	100 µF	6.3 V	±20%	2000 Hrs	-40°C ~ 105°C	0.228" (5.80mm)	—	71 mA	120.7 mA @ 10 kHz	Active	Tape & Reel
EEE-FP0J101AP	Panasonic	FP	100 µF	6.3 V	±20%	2000 Hrs	-55°C ~ 105°C	0.228" (5.80mm)	260 mOhm	195 mA	300 mA	Active	Tape & Reel
EEE-HA0J101P	Panasonic	HA	100 µF	6.3 V	±20%	1000 Hrs	-40°C ~ 105°C	0.213" (5.40mm)	—	71 mA	120.7 mA @ 10 kHz	Not For New Designs	Tape & Reel
EEE-FK0J101AP	Panasonic	FK	100 µF	6.3 V	±20%	2000 Hrs	-55°C ~ 105°C	0.240" (6.10mm)	360 mOhm	156 mA	240 mA	Active	Tape & Reel
EEE-FK0J101P	Panasonic	FK	100 µF	6.3 V	±20%	2000 Hrs	-55°C ~ 105°C	0.240" (6.10mm)	360 mOhm	180 mA	240 mA	Active	Tape & Reel
EEE-FK1C101AP	Panasonic	FK	100 µF	16 V	±20%	2000 Hrs	-55°C ~ 105°C	0.240" (6.10mm)	360 mOhm	156 mA	240 mA	Active	Tape & Reel
EEE-FK1C101P	Panasonic	FK	100 µF	16 V	±20%	2000 Hrs	-55°C ~ 105°C	0.240" (6.10mm)	360 mOhm	180 mA	240 mA	Active	Cut Tape & Digi-Reel
EEE-FK1E101SP	Panasonic	FKS	100 µF	25 V	±20%	2000 Hrs	-55°C ~ 105°C	0.240" (6.10mm)	360 mOhm	156 mA	240 mA	Not For New Designs	Tape & Reel
EEE-HBA101UAP	Panasonic	HB	100 µF	10 V	±20%	2000 Hrs	-40°C ~ 105°C	0.228" (5.80mm)	—	71 mA	120.7 mA @ 10 kHz	Active	Cut Tape & Digi-Reel
EEE-HBC101UAP	Panasonic	HB	100 µF	16 V	±20%	2000 Hrs	-40°C ~ 105°C	0.228" (5.80mm)	—	70 mA	119 mA @ 10 kHz	Active	Tape & Reel
EEE-FP1C101AP	Panasonic	FP	100 µF	16 V	±20%	2000 Hrs	-55°C ~ 105°C	0.228" (5.80mm)	260 mOhm	195 mA	300 mA	Active	Tape & Reel

Engineering Selection Recommendations

Direct Substitutes at 6.3 V (Same Voltage Rating):

EEE-FP0J101AP is a direct substitute with Active product status. It provides enhanced ripple current performance (195 mA @ 120 Hz, 300 mA @ 100 kHz versus 71 mA and 120.7 mA respectively) and specified ESR of 260 mOhm @ 100 kHz. Extended operating temperature range (-55°C to 105°C) provides additional margin. ROHS3 compliant and AEC-Q200 rated.

EEE-FK0J101AP and EEE-FK0J101P are upgrade substitutes with Active status, offering superior ripple current capability (156–180 mA @ 120 Hz, 240 mA @ 100 kHz) and specified impedance of 360 mOhm. Extended temperature range (-55°C to 105°C) and higher inventory availability support long-term supply continuity. Height increases to 0.240" (6.10mm); verify PCB clearance before selection.

Higher Voltage Substitutes (6.3 V to 10 V or 16 V):

EEE-HBA101UAP (10 V) and EEE-HBC101UAP (16 V) maintain the HB series characteristics with Active product status and identical footprint to the main part. These are suitable when circuit design permits higher voltage rating without performance degradation.

EEE-FP1C101AP (16 V) and EEE-FK1C101AP / EEE-FK1C101P (16 V) provide higher voltage ratings with enhanced ripple current and ESR specifications. EEE-FK1C101P offers highest inventory (186,021 pcs) and Cut Tape & Digi-Reel packaging flexibility.

Parts to Avoid for New Designs:

EEE-HA0J101P carries "Not For New Designs" status and reduced lifetime (1000 Hrs @ 105°C). EEE-FK1E101SP (25 V) also carries "Not For New Designs" status despite enhanced specifications.

Frequently Asked Questions (FAQ)

Q: Can EEE-FP0J101AP directly replace EEE-HB0J101P without PCB modification?

A: Yes. Both parts share identical capacitance (100 µF), voltage rating (6.3 V), tolerance (±20%), package type (Radial, Can - SMD), and surface mount land size (0.260" L x 0.260" W). Height difference is negligible (0.228" versus 0.228"). No PCB layout changes are required.

Q: What is the advantage of EEE-FK series over EEE-HB series?

A: EEE-FK series provides higher ripple current capability (156–180 mA @ 120 Hz versus 71 mA), specified ESR of 360 mOhm, extended operating temperature range (-55°C to 105°C versus -40°C to 105°C), and higher inventory availability. Height increases to 0.240" (6.10mm); verify clearance in your design.

Q: Can I use a 16 V rated part in place of a 6.3 V part?

A: Yes, provided the circuit design permits higher voltage rating. Higher voltage-rated capacitors (EEE-HBC101UAP, EEE-FK1C101AP, EEE-FK1C101P) are electrically compatible and maintain identical capacitance and tolerance. This substitution introduces no functional risk and may improve circuit margin.

Q: What does "Not For New Designs" status mean?

A: Parts marked "Not For New Designs" (EEE-HA0J101P, EEE-FK1E101SP) are in mature or declining production phases. While electrically functional, they are not recommended for new product development due to potential future discontinuation. Use Active-status parts for new designs.

Q: How do I select between EEE-FK0J101AP and EEE-FK0J101P?

A: Both parts are electrically identical at 6.3 V with 2000 Hrs @ 105°C lifetime. EEE-FK0J101P offers higher ripple current at 120 Hz (180 mA versus 156 mA). Packaging differs: EEE-FK0J101AP is Tape & Reel; EEE-FK0J101P is also Tape & Reel. Select based on assembly equipment compatibility and inventory availability.

Q: Is ESR specification critical for my application?

A: ESR becomes critical in high-frequency ripple current applications, power supply filtering, and noise-sensitive circuits. EEE-FP and EEE-FK series provide specified ESR values (260 mOhm and 360 mOhm respectively @ 100 kHz). EEE-HB series does not specify ESR; contact manufacturer for typical values if ESR is a design requirement.

Q: Can I substitute EEE-FK1C101P (16 V, Cut Tape & Digi-Reel) for EEE-HB0J101P (6.3 V, Tape & Reel)?

A: Electrically yes, with the same capacitance, tolerance, and footprint. Voltage rating is higher (16 V), which is acceptable. Packaging differs (Cut Tape & Digi-Reel versus Tape & Reel); verify your assembly equipment supports the packaging format before selection.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message