Equivalent & Substitute Parts for EEE-HB0J101AP

Part Overview

The Panasonic EEE-HB0J101AP is a 100 µF, 6.3 V aluminum electrolytic capacitor in surface mount radial can package, rated for 2000 hours at 105°C with AEC-Q200 automotive qualification. The part is currently active in production with 1007 units in stock.

Substitute parts are necessary when the original part becomes unavailable, when design requirements change, or when alternative electrical characteristics better suit application needs. The following parts maintain core functional equivalence while offering variations in voltage rating, lifetime, ESR characteristics, or series designation.

Key Parameters

Parameter	Value
Capacitance	100 µF
Voltage Rating	6.3 V
Tolerance	±20%
Lifetime @ 105°C	2000 Hrs
Operating Temperature Range	-40°C ~ 105°C
Package Type	Radial, Can - SMD
Mounting Type	Surface Mount
Size / Dimension	0.248" Dia (6.30mm)
Height - Seated (Max)	0.228" (5.80mm)
Surface Mount Land Size	0.260" L x 0.260" W (6.60mm x 6.60mm)
Polarization	Polar
Ratings	AEC-Q200
RoHS Status	ROHS3 Compliant
MSL	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution logic for the EEE-HB0J101AP is based on the following criteria:

Direct Electrical Equivalents (Same Voltage, Same Lifetime): Parts maintaining 6.3 V rating and 2000 Hrs @ 105°C lifetime with identical physical footprint and land pattern.

Voltage-Upgraded Equivalents: Parts with higher voltage ratings (10 V, 16 V, 25 V) that maintain the same capacitance, tolerance, and physical dimensions. These are electrically compatible in applications where the circuit voltage permits higher-rated components.

Series Variants: Different Panasonic series (FK, FP, HA, HB, HBA, HBC) offering the same core specifications with variations in ESR, ripple current handling, or thermal performance.

Lifetime Variants: Parts with reduced lifetime (1000 Hrs @ 105°C) or enhanced lifetime characteristics, applicable when application duty cycles differ from the original specification.

Key Parameters for Substitution:

Capacitance: 100 µF (fixed)
Tolerance: ±20% (fixed)
Package: Radial, Can - SMD (fixed)
Physical Dimensions: 0.248" Dia, 0.260" L x 0.260" W land size (fixed)
Mounting Type: Surface Mount (fixed)
Polarization: Polar (fixed)
AEC-Q200 Compliance: Required for automotive applications

Parameter Comparison

Part Number	Series	Capacitance	Voltage	Tolerance	Lifetime @ 105°C	Operating Temp	ESR @ 100kHz	Ripple Current @ 120 Hz	Ripple Current @ 100 kHz	Height (Max)	Status	Packaging
EEE-HB0J101AP	HB	100 µF	6.3 V	±20%	2000 Hrs	-40°C ~ 105°C	—	71 mA	120.7 mA	0.228" (5.80mm)	Active	Tape & Reel
EEE-FP0J101AP	FP	100 µF	6.3 V	±20%	2000 Hrs	-55°C ~ 105°C	260 mOhm	195 mA	300 mA	0.228" (5.80mm)	Active	Tape & Reel
EEE-HA0J101P	HA	100 µF	6.3 V	±20%	1000 Hrs	-40°C ~ 105°C	—	71 mA	120.7 mA	0.213" (5.40mm)	Not For New Designs	Tape & Reel
EEE-FK0J101AP	FK	100 µF	6.3 V	±20%	2000 Hrs	-55°C ~ 105°C	360 mOhm	156 mA	240 mA	0.240" (6.10mm)	Active	Tape & Reel
EEE-FK0J101P	FK	100 µF	6.3 V	±20%	2000 Hrs	-55°C ~ 105°C	360 mOhm	180 mA	240 mA	0.240" (6.10mm)	Active	Tape & Reel
EEE-FK1C101AP	FK	100 µF	16 V	±20%	2000 Hrs	-55°C ~ 105°C	360 mOhm	156 mA	240 mA	0.240" (6.10mm)	Active	Tape & Reel
EEE-FK1C101P	FK	100 µF	16 V	±20%	2000 Hrs	-55°C ~ 105°C	360 mOhm	180 mA	240 mA	0.240" (6.10mm)	Active	Cut Tape & Digi-Reel
EEE-FP1C101AP	FP	100 µF	16 V	±20%	2000 Hrs	-55°C ~ 105°C	260 mOhm	195 mA	300 mA	0.228" (5.80mm)	Active	Tape & Reel
EEE-HBA101UAP	HBA	100 µF	10 V	±20%	2000 Hrs	-40°C ~ 105°C	—	71 mA	120.7 mA	0.228" (5.80mm)	Active	Cut Tape & Digi-Reel
EEE-HBC101UAP	HBC	100 µF	16 V	±20%	2000 Hrs	-40°C ~ 105°C	—	70 mA	119 mA	0.228" (5.80mm)	Active	Tape & Reel
EEE-FK1E101SP	FKS	100 µF	25 V	±20%	2000 Hrs	-55°C ~ 105°C	360 mOhm	156 mA	240 mA	0.240" (6.10mm)	Not For New Designs	Tape & Reel

Engineering Selection Recommendations

For Direct Replacement (Same Voltage, Same Lifetime):

EEE-FP0J101AP is the primary direct substitute. It maintains 100 µF capacitance, 6.3 V rating, ±20% tolerance, and 2000 Hrs @ 105°C lifetime. The FP series offers lower ESR (260 mOhm @ 100 kHz) and higher ripple current capability (300 mA @ 100 kHz) compared to the HB series. Operating temperature range extends to -55°C. This part is active in production with 6066 units in stock.

EEE-FK0J101AP and EEE-FK0J101P are active alternatives in the FK series, also maintaining 6.3 V and 2000 Hrs @ 105°C. These parts feature 360 mOhm impedance and extended temperature range (-55°C ~ 105°C). Height increases to 0.240" (6.10mm), which may require PCB layout verification. Both are in active production status.

For Voltage-Upgraded Applications:

EEE-HBA101UAP (10 V) and EEE-HBC101UAP (16 V) maintain the original HB series characteristics with higher voltage ratings. Both are active, support 2000 Hrs @ 105°C, and preserve the 0.228" (5.80mm) height. These are suitable when circuit voltage permits higher-rated components.

EEE-FK1C101AP and EEE-FK1C101P (16 V) offer FK series performance at elevated voltage rating. Both are active with 2000 Hrs @ 105°C lifetime and extended temperature range. EEE-FK1C101P is available in Cut Tape & Digi-Reel packaging with significantly higher inventory (186021 units).

EEE-FP1C101AP (16 V) combines FP series low ESR (260 mOhm) with 16 V rating, maintaining 0.228" (5.80mm) height and 2000 Hrs @ 105°C.

Parts to Avoid for New Designs:

EEE-HA0J101P is marked "Not For New Designs" and features reduced lifetime (1000 Hrs @ 105°C). EEE-FK1E101SP (25 V) is also marked "Not For New Designs" despite active inventory.

Compliance and Certifications:

All recommended active parts maintain AEC-Q200 automotive qualification, ROHS3 compliance, and MSL 1 (Unlimited) moisture sensitivity rating. Operating temperature range varies between -40°C ~ 105°C (HB, HBA, HBC series) and -55°C ~ 105°C (FK, FP series).

Frequently Asked Questions (FAQ)

Q: Can I use a higher voltage-rated part as a substitute?

A: Yes. A 10 V, 16 V, or 25 V rated capacitor can replace the 6.3 V EEE-HB0J101AP in applications where the circuit voltage does not exceed the original 6.3 V specification. Higher voltage ratings provide additional safety margin. Verify that PCB layout accommodates any height differences (0.228" to 0.240").

Q: What is the difference between EEE-FP0J101AP and EEE-FK0J101AP?

A: Both maintain 100 µF, 6.3 V, 2000 Hrs @ 105°C. The FP series has lower ESR (260 mOhm) and higher ripple current (300 mA @ 100 kHz) but maintains 0.228" height. The FK series has 360 mOhm impedance and 240 mA ripple current but increases to 0.240" height. Choose FP for ripple current performance; choose FK if height is not constrained.

Q: Why do some parts show "Not For New Designs"?

A: Parts marked "Not For New Designs" are in end-of-life phase. While inventory may be available, Panasonic recommends using active alternatives for new product development. EEE-HA0J101P and EEE-FK1E101SP fall into this category.

Q: Are all substitute parts AEC-Q200 qualified?

A: Yes. All parts listed maintain AEC-Q200 automotive qualification, ROHS3 compliance, and MSL 1 rating, ensuring compatibility with automotive and high-reliability applications.

Q: What packaging options are available?

A: Most parts are supplied in Tape & Reel (TR) format. EEE-FK1C101P and EEE-HBA101UAP are available in Cut Tape (CT) & Digi-Reel format. Verify packaging requirements with procurement before selection.

Q: Can I substitute parts with different ripple current ratings?

A: Yes, if the application ripple current requirement does not exceed the substitute part's rating. FP series parts (300 mA @ 100 kHz) support higher ripple current than HB series (120.7 mA @ 10 kHz). Verify application ripple current specification before selection.

Q: What is the impact of ESR differences?

A: Lower ESR (FP series at 260 mOhm) reduces heat generation and voltage ripple. Higher ESR (FK series at 360 mOhm) increases heat dissipation requirements. For applications with high ripple current or thermal constraints, prefer lower ESR alternatives.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message