EEE-HA1J220UP Equivalent & Substitute Parts

Part Overview

The EEE-HA1J220UP is a 22 µF, 63 V aluminum electrolytic capacitor in surface mount radial can package, rated for 1000 hours at 105°C. This component is classified as "Not For New Designs," indicating it has been superseded in Panasonic's product portfolio. For new applications or long-term supply assurance, equivalent substitute parts with improved specifications or active product status are available.

Substiute Parts

EEE-HA1J220UP

Panasonic Electronic ComponentsIn Stock: 2115EEE-HA1J220UP Datasheet

Current PartRFQ

EEE-FK1J220P

Panasonic Electronic ComponentsIn Stock: 37971EEE-FK1J220P Datasheet

UpgradeRFQ

EEE-HA1J220P

Panasonic Electronic ComponentsIn Stock: 2108EEE-HA1J220P Datasheet

SimilarRFQ

EEE-HD1J220P

Panasonic Electronic ComponentsIn Stock: 1782EEE-HD1J220P Datasheet

SimilarRFQ

AFK226M63E16T-F

Cornell Dubilier Electronics (CDE)In Stock: 2049AFK226M63E16T-F Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the EEE-HA1J220UP is determined by the following mandatory parameters:

• Capacitance: 22 µF (exact match required)
• Voltage Rating: 63 V (exact match required)
• Tolerance: ±20% (exact match required)
• Package Type: Radial, Can - SMD (exact match required)
• Mounting Type: Surface Mount (exact match required)
• Polarization: Polar (exact match required)
• AEC-Q200 Automotive Rating: Required for automotive applications

Substitute parts are grouped into two categories:

Upgrade Substitutes: Parts with improved specifications (extended lifetime, lower impedance, wider temperature range, or active product status) that provide direct functional replacement with enhanced performance characteristics.

Similar Substitutes: Parts with identical core electrical specifications but variations in physical dimensions (height) or lifetime ratings that maintain functional compatibility within the same package family.

Parameter Comparison

Engineering Selection Recommendations

For New Designs: EEE-FK1J220P or AFK226M63E16T-F are recommended. Both parts carry active product status, extended 2000-hour lifetime ratings at 105°C, and ROHS3 compliance. EEE-FK1J220P offers Panasonic supply continuity with improved ripple current handling. AFK226M63E16T-F provides equivalent performance from an alternative qualified manufacturer.

For Extended Lifetime Applications: EEE-HD1J220P is the optimal choice, offering 5000-hour lifetime at 105°C with active product status and ROHS3 compliance. Physical dimensions (0.402" height) differ from the main part; PCB layout verification is required.

For Direct Replacement with Minimal Changes: EEE-HA1J220P maintains identical electrical specifications and similar form factor to the main part, though it carries "Not For New Designs" status. This option is suitable only for legacy system maintenance where supply of the original part is exhausted.

For Automotive Applications: All substitute parts maintain AEC-Q200 qualification, ensuring suitability for automotive-grade applications.

Frequently Asked Questions (FAQ)

Q: Can EEE-FK1J220P directly replace EEE-HA1J220UP on existing PCBs?

A: Yes. Both parts share identical capacitance (22 µF), voltage rating (63 V), tolerance (±20%), and package type (Radial, Can - SMD). Height difference is 0.012" (0.30mm), which is within typical PCB assembly tolerances for surface mount components. Verify PCB clearance for the slightly taller profile (0.256" vs. 0.244").

Q: What is the primary advantage of EEE-HD1J220P over EEE-HA1J220UP?

A: EEE-HD1J220P provides 5000-hour lifetime at 105°C compared to 1000 hours for the main part, representing a 5x improvement in thermal endurance. It also carries active product status and ROHS3 compliance. Height is increased to 0.402", requiring PCB layout verification.

Q: Are there cross-manufacturer alternatives?

A: Yes. AFK226M63E16T-F from Cornell Dubilier Electronics is a qualified substitute with identical electrical specifications, 2000-hour lifetime, and AEC-Q200 automotive rating. Surface mount land size differs slightly (0.327" L x 0.374" W vs. 0.327" L x 0.327" W); verify PCB pad compatibility.

Q: Why is EEE-HA1J220UP marked "Not For New Designs"?

A: This designation indicates the part has been superseded by improved alternatives in Panasonic's product line. New designs should specify EEE-FK1J220P or EEE-HD1J220P to ensure long-term supply availability and benefit from enhanced performance characteristics.

Q: Do all substitute parts maintain automotive qualification?

A: Yes. All listed substitute parts carry AEC-Q200 automotive qualification, maintaining compliance for automotive applications.

Q: What is the impact of impedance differences between substitutes?

A: EEE-FK1J220P and AFK226M63E16T-F both specify 1.2 Ohms impedance at 100 kHz, while EEE-HD1J220P specifies 1.5 Ohms. These differences affect high-frequency ripple current performance. For applications with stringent ripple current requirements, EEE-FK1J220P or AFK226M63E16T-F are preferred.