EEE-HA0J102UP Equivalent & Substitute Parts

Part Overview

The EEE-HA0J102UP is a 1000 µF, 6.3 V aluminum electrolytic capacitor in surface mount radial can package, rated for automotive applications with AEC-Q200 compliance. This part is classified as Not For New Designs, indicating it has been superseded in Panasonic's product portfolio. Finding equivalent or substitute parts is necessary for ongoing production support, design updates, or when original inventory becomes unavailable.

Key Parameters

Parameter	Value
Capacitance	1000 µF
Voltage Rating	6.3 V
Tolerance	±20%
Package Type	Radial, Can - SMD
Case Size	0.315" Dia (8.00mm) × 0.402" H (10.20mm)
Mounting	Surface Mount
Operating Temperature	-40°C ~ 105°C
Lifetime Rating	1000 Hrs @ 105°C
Polarization	Polar
Ratings	AEC-Q200
RoHS Status	RoHS Compliant

Substitute Part Grouping Explanation

Substitution of the EEE-HA0J102UP is determined by strict electrical and mechanical compatibility:

Electrical Parameters (Must Match):

Capacitance: 1000 µF
Voltage Rating: 6.3 V
Tolerance: ±20%
Polarization: Polar

Mechanical Parameters (Must Match):

Package Type: Radial, Can - SMD
Case Diameter: 0.315" (8.00mm)
Surface Mount Land Size: 0.327" L × 0.327" W (8.30mm × 8.30mm)
Mounting Type: Surface Mount

Parameters Allowing Variation:

Height: May increase from 0.402" (10.20mm) to 0.413" (10.50mm) if PCB layout permits
Lifetime Rating: May be upgraded from 1000 Hrs to 2000 Hrs or 5000 Hrs @ 105°C
Operating Temperature Range: May be extended from -40°C ~ 105°C to -55°C ~ 105°C
ESR and Ripple Current: May improve in newer series
Product Status: Active parts are preferred over Not For New Designs classification

Parameter Comparison

Part Number	Series	Capacitance	Voltage	Case Size (Dia × H)	Lifetime @ 105°C	Operating Temp	Product Status	RoHS Status
EEE-HA0J102UP	HA	1000 µF	6.3 V	0.315" × 0.402"	1000 Hrs	-40°C ~ 105°C	Not For New Designs	RoHS Compliant
EEE-FP0J102AP	FP	1000 µF	6.3 V	0.315" × 0.402"	2000 Hrs	-55°C ~ 105°C	Active	ROHS3 Compliant
EEE-FN0J102P	FN	1000 µF	6.3 V	0.315" × 0.413"	2000 Hrs	-55°C ~ 105°C	Active	ROHS3 Compliant
EEE-FK0J102AP	FK	1000 µF	6.3 V	0.315" × 0.413"	2000 Hrs	-55°C ~ 105°C	Active	ROHS3 Compliant
EEE-FK0J102GP	FK	1000 µF	6.3 V	0.315" × 0.413"	5000 Hrs	-55°C ~ 105°C	Active	ROHS3 Compliant
EEE-FK0J102P	FK	1000 µF	6.3 V	0.315" × 0.413"	2000 Hrs	-55°C ~ 105°C	Active	ROHS3 Compliant
EEE-FT1A102AP	FT	1000 µF	10 V	0.315" × 0.413"	2000 Hrs	-55°C ~ 105°C	Active	ROHS3 Compliant
EEE-FT1A102GP	FT	1000 µF	10 V	0.315" × 0.413"	5000 Hrs	-55°C ~ 105°C	Active	ROHS3 Compliant
EEE-FC0J102AP	FC	1000 µF	6.3 V	0.394" × 0.402"	1000 Hrs	-40°C ~ 105°C	Not For New Designs	RoHS Compliant
EEE-FC0J102P	FC	1000 µF	6.3 V	0.394" × 0.402"	1000 Hrs	-40°C ~ 105°C	Not For New Designs	RoHS Compliant
EEE-HA0J102AP	HA	1000 µF	6.3 V	0.394" × 0.402"	1000 Hrs	-40°C ~ 105°C	Not For New Designs	RoHS Compliant

Engineering Selection Recommendations

Direct Substitutes (Same Case Size, Electrical Specifications):

EEE-FP0J102AP is the primary direct substitute. It maintains the 0.315" (8.00mm) case diameter and 0.402" (10.20mm) height, matching the original footprint exactly. This part is Active status with extended 2000 Hrs lifetime and improved temperature range (-55°C ~ 105°C). ROHS3 compliance provides updated environmental standards.

Preferred Upgrades (Enhanced Performance, Slightly Larger Height):

EEE-FK0J102P and EEE-FK0J102AP offer 2000 Hrs lifetime with Active product status. Height increases to 0.413" (10.50mm), requiring PCB layout verification. EEE-FK0J102GP extends lifetime to 5000 Hrs for applications requiring extended service life. All FK series parts maintain 6.3 V rating and 0.315" diameter.

Higher Voltage Alternative (Same Capacitance, Larger Voltage Rating):

EEE-FT1A102AP and EEE-FT1A102GP provide 10 V rating instead of 6.3 V, suitable for circuits with higher voltage margins. These are electrically compatible in 6.3 V applications due to voltage derating. Height is 0.413" (10.50mm). EEE-FT1A102GP offers 5000 Hrs lifetime.

Not Recommended for New Designs:

EEE-FC0J102AP, EEE-FC0J102P, and EEE-HA0J102AP are classified as Not For New Designs. These parts have larger 0.394" (10.00mm) case diameter, requiring different PCB footprints. Use only for direct replacement in existing designs where case size matches.

Frequently Asked Questions (FAQ)

Q: Can EEE-FP0J102AP directly replace EEE-HA0J102UP without PCB modification?

A: Yes. EEE-FP0J102AP maintains identical case diameter (0.315" / 8.00mm) and height (0.402" / 10.20mm), with matching surface mount land size (0.327" × 0.327" / 8.30mm × 8.30mm). No PCB layout changes are required.

Q: What is the difference between EEE-FK0J102P and EEE-FK0J102AP?

A: Both are FK series with 2000 Hrs lifetime and 6.3 V rating. The primary difference is packaging designation. EEE-FK0J102P uses standard tape and reel, while EEE-FK0J102AP may have different packaging specifications. Electrical and mechanical parameters are equivalent.

Q: Can I use EEE-FT1A102AP (10 V) in place of EEE-HA0J102UP (6.3 V)?

A: Electrically, yes. The 10 V rated capacitor operates safely in 6.3 V circuits with voltage derating margin. However, the case height increases to 0.413" (10.50mm), requiring PCB clearance verification. Confirm mechanical fit before substitution.

Q: Why does EEE-FK0J102GP cost more than EEE-FK0J102P?

A: EEE-FK0J102GP has 5000 Hrs lifetime rating at 105°C, compared to 2000 Hrs for EEE-FK0J102P. Extended lifetime requires different internal construction and materials, justifying higher cost for applications requiring long-term reliability.

Q: Are all substitute parts AEC-Q200 rated?

A: Yes. All listed substitute parts carry AEC-Q200 automotive qualification, matching the original EEE-HA0J102UP specification.

Q: What is the impact of changing from RoHS to ROHS3 compliance?

A: ROHS3 represents updated environmental compliance standards. Parts marked ROHS3 Compliant meet current regulatory requirements and are preferred for new production. RoHS Compliant parts meet earlier standards. Both are acceptable for existing designs, but ROHS3 is recommended for new applications.

Q: Can I substitute EEE-HA0J102AP for EEE-HA0J102UP?

A: No. EEE-HA0J102AP has a larger case diameter (0.394" / 10.00mm) compared to EEE-HA0J102UP (0.315" / 8.00mm). Different PCB footprints are required. Use only if your design already accommodates the larger case size.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message