Panasonic EEE-HA0J102AP Equivalent & Substitute Parts

Part Overview

The Panasonic EEE-HA0J102AP is a 1000 µF, 6.3 V aluminum electrolytic capacitor in surface mount radial can package, rated for 1000 hours at 105°C. This part carries a "Not For New Designs" status, indicating it has been superseded in Panasonic's product portfolio. Equivalent and substitute parts are necessary to ensure design continuity, improve performance characteristics, or accommodate supply chain requirements while maintaining electrical and mechanical compatibility within automotive applications.

Key Parameters

Parameter	Value
Capacitance	1000 µF
Voltage Rating	6.3 V
Tolerance	±20%
Package Type	Radial, Can - SMD
Mounting Type	Surface Mount
Physical Dimensions	0.394" Dia (10.00mm), Height 0.402" (10.20mm)
Land Size	0.406" L x 0.406" W (10.30mm x 10.30mm)
Lifetime Rating	1000 Hrs @ 105°C
Operating Temperature	-40°C ~ 105°C
Polarization	Polar
AEC-Q200 Compliance	Yes
RoHS Status	RoHS Compliant

Substitute Part Grouping Explanation

Substitution of the EEE-HA0J102AP is determined by the following criteria:

Electrical Parameters (Must Match or Exceed):

Capacitance: 1000 µF (exact match required)
Tolerance: ±20% (exact match required)
Voltage Rating: 6.3 V minimum (higher ratings acceptable for voltage-derating applications)
Operating Temperature Range: Must support -40°C to 105°C minimum
Polarization: Polar (required)

Mechanical Parameters (Must Match):

Package Type: Radial, Can - SMD (exact match required)
Mounting Type: Surface Mount (exact match required)
Physical Dimensions: 0.394" Dia (10.00mm), compatible height range 0.402" to 0.413"
Land Size: 0.406" L x 0.406" W (10.30mm x 10.30mm) (exact match required)

Compliance & Ratings (Must Match or Exceed):

AEC-Q200 Automotive Rating (required)
RoHS Compliance (required)
Moisture Sensitivity Level: MSL 1 (Unlimited)

Substitutes are grouped into three categories: Direct Equivalents (same voltage rating), Voltage-Upgraded Substitutes (higher voltage rating for enhanced reliability), and Manufacturer-Recommended Active Alternatives (current production parts with improved specifications).

Parameter Comparison

Part Number	Manufacturer	Capacitance	Voltage	Tolerance	Lifetime @ 105°C	Operating Temp	Height (Max)	Product Status	RoHS
EEE-HA0J102AP	Panasonic	1000 µF	6.3 V	±20%	1000 Hrs	-40°C ~ 105°C	0.402" (10.20mm)	Not For New Designs	RoHS Compliant
EEE-FC0J102AP	Panasonic	1000 µF	6.3 V	±20%	1000 Hrs	-40°C ~ 105°C	0.402" (10.20mm)	Not For New Designs	RoHS Compliant
EEE-FC1A102P	Panasonic	1000 µF	10 V	±20%	1000 Hrs	-40°C ~ 105°C	0.402" (10.20mm)	Not For New Designs	RoHS Compliant
EEE-FC1A102AP	Panasonic	1000 µF	10 V	±20%	1000 Hrs	-40°C ~ 105°C	0.402" (10.20mm)	Not For New Designs	RoHS Compliant
EEE-FK1C102SP	Panasonic	1000 µF	16 V	±20%	2000 Hrs	-55°C ~ 105°C	0.413" (10.50mm)	Not For New Designs	ROHS3 Compliant
EEE-FN1A102P	Panasonic	1000 µF	10 V	±20%	2000 Hrs	-55°C ~ 105°C	0.413" (10.50mm)	Active	ROHS3 Compliant
EEE-FK1A102AP	Panasonic	1000 µF	10 V	±20%	2000 Hrs	-55°C ~ 105°C	0.413" (10.50mm)	Active	ROHS3 Compliant
EEE-FK1A102GP	Panasonic	1000 µF	10 V	±20%	5000 Hrs	-55°C ~ 105°C	0.413" (10.50mm)	Active	ROHS3 Compliant
EEE-FK1A102P	Panasonic	1000 µF	10 V	±20%	2000 Hrs	-55°C ~ 105°C	0.413" (10.50mm)	Active	ROHS3 Compliant
EEE-FP1A102AP	Panasonic	1000 µF	10 V	±20%	2000 Hrs	-55°C ~ 105°C	0.402" (10.20mm)	Active	ROHS3 Compliant
EEE-FT1C102AP	Panasonic	1000 µF	16 V	±20%	2000 Hrs	-55°C ~ 105°C	0.413" (10.50mm)	Active	ROHS3 Compliant

Engineering Selection Recommendations

Direct Equivalent (Same Voltage, Same Lifetime): EEE-FC0J102AP is a direct functional equivalent with identical electrical and mechanical specifications. Both parts carry "Not For New Designs" status and share the same 1000-hour lifetime rating at 105°C. This part is suitable for direct replacement in existing designs where no performance enhancement is required.

Voltage-Upgraded Substitutes (10 V Rating, Extended Lifetime): EEE-FC1A102P, EEE-FC1A102AP, EEE-FK1A102AP, EEE-FK1A102P, and EEE-FP1A102AP provide 10 V voltage rating with 2000-hour lifetime at 105°C. These parts are electrically compatible in applications where the original 6.3 V rating is adequate, as they operate at lower voltage stress. EEE-FK1A102AP and EEE-FK1A102P are Active status parts, making them preferred for new designs. EEE-FP1A102AP offers reduced ESR (60 mOhm @ 100 kHz) and higher ripple current capability (1.19 A @ 100 kHz).

Higher Voltage Substitutes (16 V Rating, Extended Lifetime): EEE-FK1C102SP and EEE-FT1C102AP provide 16 V rating with 2000-hour lifetime. EEE-FT1C102AP is Active status with 60 mOhm ESR and 1.19 A ripple current at 100 kHz. These parts are suitable for applications requiring enhanced voltage margin or improved thermal performance.

Manufacturer-Recommended Active Alternative: EEE-FN1A102P is Panasonic's recommended active production part with 10 V rating, 2000-hour lifetime, and ROHS3 compliance. This part is the preferred choice for new designs requiring a direct functional replacement with current manufacturing support.

Height Consideration: Parts with 0.413" (10.50mm) maximum height (EEE-FK series, EEE-FN1A102P, EEE-FT1C102AP) require verification of PCB clearance, as they exceed the original 0.402" (10.20mm) height by 0.011 inches. EEE-FP1A102AP maintains the original 0.402" height while offering improved performance characteristics.

Frequently Asked Questions (FAQ)

Q: Can I use a 10 V rated capacitor in place of the 6.3 V EEE-HA0J102AP? A: Yes. A 10 V rated capacitor is electrically compatible in applications designed for 6.3 V operation. The higher voltage rating provides additional safety margin and typically offers improved reliability characteristics. All mechanical and land pattern specifications remain compatible.

Q: What is the difference between EEE-FK1A102AP and EEE-FK1A102P? A: Both parts are identical in electrical specifications (1000 µF, 10 V, 2000 Hrs @ 105°C, Active status). The primary difference is packaging: EEE-FK1A102AP is supplied in Tape & Reel (TR), while EEE-FK1A102P is supplied in Cut Tape (CT) & Digi-Reel. Select based on your assembly process requirements.

Q: Why do some substitute parts have a maximum height of 0.413" instead of 0.402"? A: The FK and FT series parts incorporate improved internal construction that results in slightly increased height. This 0.011-inch difference must be verified against PCB clearance requirements. If height is constrained, select EEE-FC0J102AP, EEE-FP1A102AP, or EEE-FC1A102AP, which maintain the original 0.402" maximum height.

Q: Is EEE-FN1A102P recommended for new designs? A: Yes. EEE-FN1A102P carries Active product status and represents Panasonic's current production recommendation for this capacitance and voltage class. It provides 2000-hour lifetime at 105°C with ROHS3 compliance and is the preferred choice for new automotive designs.

Q: What does "Not For New Designs" mean? A: This status indicates the part has been superseded in Panasonic's portfolio but remains available for existing design support. For new designs, select parts with Active status such as EEE-FN1A102P, EEE-FK1A102AP, EEE-FK1A102P, EEE-FP1A102AP, or EEE-FT1C102AP.

Q: Are all substitute parts AEC-Q200 rated? A: Yes. All listed substitute parts carry AEC-Q200 automotive qualification and are suitable for automotive applications. All parts are RoHS or ROHS3 compliant.

Q: Can I substitute EEE-FT1C102AP (16 V) for the original 6.3 V part? A: Yes. The 16 V rating is electrically compatible and provides enhanced voltage margin. However, verify that the 0.413" maximum height accommodates your PCB layout, as it exceeds the original 0.402" height.

Q: What is the advantage of EEE-FP1A102AP over other 10 V substitutes? A: EEE-FP1A102AP offers reduced ESR (60 mOhm @ 100 kHz) and higher ripple current capability (1.19 A @ 100 kHz) compared to earlier FC series parts. It maintains the original 0.402" height while providing improved performance for high-ripple-current applications. It is Active status with ROHS3 compliance.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message