EEE-FPJ182UAV Equivalent & Substitute Parts

Part Overview

The EEE-FPJ182UAV is a 1800 µF, 6.3 V aluminum electrolytic capacitor in surface mount radial can package, manufactured by Panasonic Electronic Components. This component is rated for automotive applications and high temperature reflow processes, with AEC-Q200 qualification and a 2000-hour lifetime at 105°C. The part is currently in active production status. Substitute parts may be required due to supply constraints, design revisions, or manufacturing transitions within the Panasonic FP series product line.

Substiute Parts

EEE-FPJ182UAV

Panasonic Electronic ComponentsIn Stock: 1152EEE-FPJ182UAV Datasheet

Current PartRFQ

EEE-FK0J182SV

Panasonic Electronic ComponentsIn Stock: 1530EEE-FK0J182SV Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the EEE-FPJ182UAV is determined by strict equivalence across the following electrical and mechanical parameters:

• Capacitance value: 1800 µF (exact match required)
• Voltage rating: 6.3 V (exact match required)
• Tolerance: ±20% (exact match required)
• ESR @ 100 kHz: 80 mOhm (exact match required)
• Lifetime @ 105°C: 2000 Hrs (exact match required)
• Operating temperature range: -55°C to 105°C (exact match required)
• Package type: Radial, Can - SMD (exact match required)
• Physical dimensions: 0.394" Dia (10.00 mm), Height 0.425" (10.80 mm) (exact match required)
• Land size: 0.406" L x 0.406" W (10.30 mm x 10.30 mm) (exact match required)
• AEC-Q200 qualification: Required for automotive applications
• RoHS3 compliance: Required
• MSL rating: 1 (Unlimited)

The EEE-FK0J182SV meets all electrical and mechanical equivalence criteria and is therefore a valid substitute.

Parameter Comparison

Engineering Selection Recommendations

The EEE-FK0J182SV is electrically and mechanically equivalent to the EEE-FPJ182UAV across all specified parameters. Both components meet AEC-Q200 automotive qualification requirements and maintain ROHS3 compliance. The primary distinction is product status: the EEE-FPJ182UAV is in active production, while the EEE-FK0J182SV is designated as "Not For New Designs."

For new design implementations, the EEE-FPJ182UAV (FP series) is the preferred selection. The EEE-FK0J182SV (FKS series) is suitable for legacy system support, field replacements, or applications where existing inventory must be maintained. Both parts are qualified for automotive and high temperature reflow applications.

Frequently Asked Questions (FAQ)

Q: Can the EEE-FK0J182SV be used as a direct replacement for the EEE-FPJ182UAV in automotive applications?

A: Yes. Both components are AEC-Q200 qualified and meet identical electrical specifications (1800 µF, 6.3 V, 80 mOhm ESR @ 100 kHz, 2000 Hrs @ 105°C). Physical dimensions and land sizes are identical, enabling direct PCB substitution.

Q: What is the difference between the FP and FKS series designations?

A: The FP series (EEE-FPJ182UAV) represents the current active product line. The FKS series (EEE-FK0J182SV) is a legacy series marked "Not For New Designs." Both series share identical electrical and mechanical specifications for this 1800 µF, 6.3 V rating.

Q: Are there differences in ripple current handling between these parts?

A: Ripple current at 100 kHz is identical at 850 mA for both components. Ripple current at 120 Hz differs slightly: EEE-FPJ182UAV is rated at 595 mA, while EEE-FK0J182SV is rated at 552.5 mA. This difference does not affect substitution eligibility for standard automotive applications.

Q: Do both parts have the same moisture sensitivity level?

A: Yes. Both the EEE-FPJ182UAV and EEE-FK0J182SV carry MSL rating 1 (Unlimited), indicating no moisture sensitivity restrictions during storage or handling.

Q: Can these parts be used interchangeably in high temperature reflow processes?

A: Yes. Both components are rated for high temperature reflow and maintain identical operating temperature ranges (-55°C to 105°C) and lifetime specifications (2000 Hrs @ 105°C).